View ASMT-FJ10-ADH00_4157687.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ASMT-FJ10-ADH00
Surface Mount AF Lamp
Data Sheet
Descriptions
Avago Technologies' ASMT-FJ10-ADH00 is a SMT (Surface Mount Technology) dome lamp uses an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern. The device is made by encapsulating LED chip on axial lead frame to form molded epoxy lamp package with 6 bended leads for surfacing mounting. This lamp type LED utilize Aluminum Indium Gallium Phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The color available for this SMT Lamp package is 605nm Orange. This narrow angle SMT lamp package is designed for applications that require long distance illumination and narrow beam pattern such as auxiliary flash for auto-focus function in digital still camera etc. In order to facilitate pick and place operation, this SMT Lamp is shipped in tape and reel, with 1000 units per reel. This package is compatible with Pb-free IR soldering process.
Features
* Smooth, Consistent Narrow Radiation Pattern * 8 View Angle * 4.8 L x 4.8 X 5.33H mm Package Dimension * Good Intensity Output * Compatible with IR Solder Reflow * Available in 16mm tape on 15" (380mm) Diameter reels * Clear, Non-diffused Epoxy * IEC/EN 60825-1 Eye Safety Class 1 * RoHS Compliant
Applications
* Camera
Eye Safety
These orange Surface Mount AF Lamp are use for camera application. The LEDs have lenses, which focus the beam at about 10mm from the front of the lens, from where the beam diverges relatively slowly. If the LEDs were placed in a product, they would create a Class 1 LED to IEC/EN 60825-1 (2001) under all conditions of operation & single fault failure. As long as no collimating optics are added to the optical path.
CAUTION: ASMT-FJ10 LEDs are Class 1 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
Package Dimensions
5.20 0.10 4.80
4.80 0.10
Pin: 1,2,4 - Anode Pin: 3,5,6 - Cathode 1.27 0.51
4.32 0.1
5.33 0.10
3.92
0.15 Notes: 1. All Dimensions in millimeters. 2. Tolerance is 0.1mm unless otherwise specified.
Device Selection Guide
Color Orange Part Number ASMT-FJ10-ADH00 min. lv (cd) 9 Typ. lv (cd) 22 Test Current (mA) 20 Dice Technology AllnGaP
Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. Iv Tolerance = 15%
Absolute Maximum Ratings at TA = 25C
Parameter DC Forward Current Power Dissipation LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature ASMT-FJ10-ADH00 50 130 110 -40 to +85 -40 to +100 Figure 6 Units mA mW C C C
2
Optical Characteristics (TA = 25 C)
Peak Wavelength lPEAK (nm) Part Number ASMT-FJ10-ADH00 Color Orange Typ. 612 Dominant Wavelength lD [1] (nm) Typ. 605 Viewing Angle 2q1/2 [2] (Degrees) Typ. 8 Luminous Efficacy, hv[3] (lm/W) Typ. 355 Luminous Efficiency (lm/W) Typ. 27
Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt.
Electrical Characteristic (TA = 25C)
Forward VoltageVF (Volts) @ IF = 20mA Part Number ASMT-FJ10-ADH00
Notes: Vf tolerance is 0.1V.
1.0 0.9 0.8 0.6 0.5 0.4 0.3 0.2 0.1 0 380 430 480 530 580 630 680 730 780 0.7
Reverse Voltage VR @ 10mA Min. 5
Capacitance C (pF), VF= 0 f = 1MHz Typ. 22
Min. 1.8
Typ. 2.0
Max. 2.4
50 45 40
Forward Current-mA
35 30 25 20 15 10 5 0 0 0.5 1 1.5 2 2.5 3
Relative Intensity
Wavelength-nm
Forward Voltage-V
Figure 2. Forward Current vs Forward Voltage
Figure 1. Relative Intensity vs. Wavelength
3.0 2.5
Relative Luminous Intensity (Normalized at 20mA)
Relative Intensity
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -70 -50 -30 -10 10 30 Off-Axis Angle () 50 70 90
2.0 1.5 1.0 0.5 0 0 10 20 30 DC Forward Current-mA 40 50
Figure 3. Relative Intensity vs. Forward Current
Figure 4. Radiation Pattern
3
Maximum DC Forward Current mA
60 50 40 30 20 10 0 0 20 40 60 80 100 Ambient Temperature - C Time Figure 6. Recommended reflow soldering USER FEED DIRECTION Temperature 217 C 125C 25C 255 C 3C/SEC. MAX. +5C -0C 10 to 20 SEC. 6 C/SEC. MAX.
MAX. 120 SEC.
60 to 150 SEC.
Figure 5. Maximum forward current vs ambient temperature.
1.2 0.6 0.67
CATHODE SIDE
2.88
Figure 7. Recommended soldering land pattern PRINTED LABEL Figure 8. Reeling Orientations
Figure 9. Reel Dimensions
4
12.00 0.10 4.00 0.10
2.00 0.10 1.50 0.10 1.75 0.10
7.50 0.10 16.0 + 0.30 -0.10
1.50 0.25
0.400 0.02
6 MAX. 4.95 0.10
Figure 10. Tape Dimensions
10 MAX.
5 MAX. 5.34 0.10 5.40 0.10
END
START
THERE SHALL BE A MINIMUM OF 600 mm (23.6 ") OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MOUNTED WITH COMPONENTS
THERE SHALL BE A MINIMUM OF 160 mm (6.3 ") OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MINIMUM OF 230 mm(9.05 ") MAY CONSIST OF CARRIER AND/OR COVER TAPE.
Figure 11. Tape Leader and Trailer Dimensions There shall be a minimum of 600mm (23.6") of empty component pockets sealed with cover tape Notes: 1. All dimensions in millimeters. 2. Tolerance is 0.1 mm unless otherwise specified.
Iv Bin Category (cd)
Bin ID D E F G H Min 9.0 11.5 15.0 19.5 25.5 Max 11.5 15.0 19.5 25.5 33.0
Color Bin Category
Orange A B C
Tolerance = 1nm
Min (nm) 600 604 608
Max (nm) 604 608 612
Iv Tolerance = 15%
For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0482EN AV02-0133EN -February 8, 2007
6

▲Up To Search▲

Price & Availability of ASMT-FJ10-ADH00

	To Download ASMT-FJ10-ADH00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .