|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 95680A HFA08PB120PBF HEXFRED TM Ultrafast, Soft Recovery Diode Features BASE CATHODE VR = 1200V VF (typ.)* = 2.4V IF (AV) = 8.0A Qrr (typ.)= 140nC IRRM (typ.) = 4.5A 3 ANODE 2 Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free 4 2 1 CATHODE trr (typ.) = 28ns di(rec) M /dt (typ.)*= 85A /s Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count TO-247AC (Modified) Benefits Description International Rectifier's HFA08PB120 is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 volts and 8 amps continuous current, the HFA08PB120 is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA08PB120 is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. Absolute Maximum Ratings VR IF @ TC = 100C IFSM IFRM PD @ TC = 25C PD @ TC = 100C TJ TSTG * 125C www.irf.com 1 9/16/04 Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Parameter 1200 8.0 130 32 73.5 29 - 55 to 150 Max Units V A W C HFA08PB120PBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter VBR Cathode Anode Breakdown Voltage VFM Max. Forward Voltage IRM Max. Reverse Leakage Current CT LS Junction Capacitance Series Inductance 2.6 3.4 2.4 0.31 135 11 8.0 3.3 4.3 3.1 10 1000 20 pF nH A V IF = 8.0A IF = 16A IF = 8.0A, TJ = 125C VR = VR Rated See Fig. 2 See Fig. 1 Min Typ Max Units 1200 V Test Conditions IR = 100A TJ = 125C, VR = 0.8 x VR RatedD R VR = 200V Rated See Fig. 3 Measured lead to lead 5mm from pkg body Dynamic Recovery Characteristics @ TJ = 25C (unless otherwise specified) Parameter trr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 Peak Recovery Current See Fig. 6 Reverse Recovery Charge See Fig. 7 Reverse Recovery Time See Fig. 5, 10 Min Typ Max Units 28 63 106 4.5 6.2 140 335 133 85 95 160 8.0 11 380 880 A/s nC A ns Test Conditions IF = 1.0A, dif/dt = 200A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C IF = 8.0A VR = 200V di f /dt = 200A/s di(rec)M /dt1 Peak Rate of Recovery di(rec)M /dt2 Current During tb See Fig. 8 Thermal - Mechanical Characteristics Parameter Tlead RthJC RthJA RthCS Wt Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heat Sink Weight Min - Typ 0.25 6.0 0.21 - Max 300 1.7 40 12 10 Units C k/W g (oz) Kg-cm lbfin Mounting Torque 6.0 5.0 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com HFA08PB120PBF 100 1000 100 10 1 0.1 0.01 25C T = 150C J 125C 100C Instantaneous Forward Current - I F (A) Reverse Current - I R (A) 0 300 600 900 1200 10 Reverse Voltage - VR (V) Fig. 2 - Typ. Values Of Reverse Current Vs. Reverse Voltage 100 Junction Capacitance - CT (pF) T = 25C J 10 T = 150C J T = 125C J T = 25C J 1 0 2 4 6 8 10 1 1 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics 10 Thermal Impedance Z thJC (C/W) 10 100 1000 10000 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM 0.1 Single Pulse (Thermal Resistance) Notes: t1 t2 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 t1, Rectangular Pulse Duration (Seconds) 0.1 1 Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 HFA08PB120PBF 160 140 120 trr ( ns ) 20 IF = 8 A IF = 4 A V R= 160V T J = 125C T J = 25C 16 IF = 8 A IF = 4 A 100 80 60 Irr ( A) 12 8 4 40 20 100 di F /dt (A/s ) Fig. 5 - Typical Reverse Recovery Vs. dif /dt VR = 160V TJ = 125C TJ = 25C 1000 0 100 di F /dt (A/s ) 1000 Fig. 6 - Typical Recovery Current Vs. dif /dt 1200 VR = 160V TJ = 125C TJ = 25C 1000 IF = 8 A IF = 4 A 1000 IF = 8 A IF = 4 A 600 di(REC) M/dt (A/s ) 800 Qrr ( nC ) 100 400 200 VR = 160V TJ = 125C TJ = 25C 0 100 di F /dt (A/s ) 1000 10 100 di F /dt (A/s ) 1000 Fig. 8 - Typical Stored Charge vs. dif /dt Fig. 7 - Typical di(REC) M/dt vs. dif /dt 4 www.irf.com HFA08PB120PBF Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. di F /dt dif/dt ADJUST D G IRFP250 S Fig. 9- Reverse Recovery Parameter Test Circuit 3 IF 0 t rr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 di F /dt di f 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 HFA08PB120PBF Outline Table Conforms to JEDEC Outline TO-247AC Dimensions in millimeters and (inches) Ordering Information Table Device Code HF 1 A 2 08 3 PB 120 4 5 1 2 3 4 5 - Hexfred Family Process Designator Current Rating Package Outline Voltage Rating A B = Electron Irradiated = Platinum Diffused (08 = 8A) (PB = TO-247, 2 pins) (120 = 1200V) Note: Marking "P" indicates Lead-Free. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/04 6 www.irf.com |
Price & Availability of HFA08PB120PBF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |