 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EH11 Series * RoHS Compliant (Pb-free) * HCMOS/TTL output * 5.0V supply voltage * 14 pin DIP package * Stability to 20ppm * Custom lead length, gull wing options available EH11 H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) Duty Cycle (VDD=5.0VDC) w/TTL Load w/HCMOS Load at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS Load (70.000MHz) at 50% of waveform w/ TTL Load or w/HCMOS Load (>70.000MHz) at 50% of waveform w/TTL Load or w/HCMOS Load Rise Time / Fall Time 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (70.000MHz) 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (>70.000MHz) Tri-State Input Voltage VIH :No Connection VIH :2.2VDC VIL :0.8VDC Aging (at 25C) Start Up Time Load Drive Capability Period Jitter: Absolute Period Jitter: One Sigma MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE 1.000MHz to 155.520MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 10% 50mA Maximum (Unloaded) 100ppm, 50ppm, 25ppm, or 20ppm Maximum 2.4VDC Minimum VDD-0.4VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 50 10(%) (Standard) 50 10(%) (Standard) 50 5(%) (Optional) 6 nSeconds Maximum 4 nSeconds Maximum Enables Output Enables Output IOH =-16mA IOH =-16mA IOL =+16mA IOL =+16mA Disables Output: High Impedance 5ppm / year Maximum 10 mSeconds Maximum 70.000MHz >70.000MHz 10TTL Load or 50pF HCMOS Load Maximum 5TTL Load or 15pF HCMOS Load Maximum 250pSec Maximum, 100pSec Typical 50pSec Maximum, 30pSec Typical CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 14 Pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EH11 00 ET T TS - 70.000M - G FREQUENCY TOLERANCE / STABILITY 00=100ppm Max.(Standard), 45=50ppm Max. 25=25ppm Max., 20=20ppm Max. OPERATING TEMP. RANGE Blank=0C to 70C (Standard), ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS O Line 1: ECLIPTEK Line 2: EH11 TS Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Pin 1: Tri-State Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 Characteristic Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 14 Pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EH11 Series * RoHS Compliant (Pb-free) * HCMOS/TTL Output * 5.0V Supply Voltage * 8 Pin DIP Package * Stability to 20ppm * Custom Lead Length and Gull Wing Options Available EH11 H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Input Current Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25C, Shock, and Vibration Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) Duty Cycle (VDD=5.0VDC) w/TTL Load w/HCMOS Load at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS Load (70.000MHz) at 50% of waveform w/ TTL Load or w/HCMOS Load (>70.000MHz) at 50% of waveform w/TTL Load or w/HCMOS Load Rise Time / Fall Time 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (70.000MHz) 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (>70.000MHz) Tri-State Input Voltage VIH :No Connection VIH :2.2VDC VIL :0.8VDC Aging (at 25C) Start Up Time Load Drive Capability Period Jitter: Absolute Period Jitter: One Sigma MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE 1.000MHz to 155.520MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 10% 50mA Maximum (Unloaded) 100ppm, 50ppm, 25ppm, or 20ppm Maximum 2.4VDC Minimum VDD-0.4VDC Minimum 0.4VDC Maximum 0.5VDC Maximum 50 10(%) (Standard) 50 10(%) (Standard) 50 5(%) (Optional) 6 nSeconds Maximum 4 nSeconds Maximum Enables Output Enables Output IOH =-16mA IOH =-16mA IOL =+16mA IOL =+16mA Disables Output: High Impedance 5ppm / year Maximum 10 mSeconds Maximum 70.000MHz >70.000MHz 10TTL Load or 50pF HCMOS Load Maximum 5TTL Load or 15pF HCMOS Load Maximum 250pSec Maximum, 100pSec Typical 50pSec Maximum, 30pSec Typical CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 8 Pin DIP 5.0V OS45 08/05 800-ECLIPTEK www.ecliptek.com for latest revision 62 Specifications subject to change without notice. PART NUMBERING GUIDE EH11 00 HS ET T TS - 70.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=100ppm Max.(Standard), 45=50ppm Max. 25=25ppm Max., 20=20ppm Max. PACKAGE HS=Half Size 8 Pin DIP OPERATING TEMP. RANGE Blank=0C to 70C (Standard), ET=-40C to 85C DUTY CYCLE Blank=50 10(%) (Standard), T=50 5(%) PACKAGING OPTIONS Blank=Bulk (Standard), TR= Tape & Reel (only offered with Half Size G and Half Size G2 Options) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Half Size Gull Wing (See Page 132) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For "G" Option O Pin 1: Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EH11 TS Series Designator Line 3: XX.XXX M ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Frequency in MHz (5 Digits Maximum + Decimal) 700 Pieces Per Reel Compliant to EIA-481A Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 8 pin DIP 5.0V OS45 08/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. |
Price & Availability of EH1100ETTTS-70000M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |