View 15-21W1D-APQHY2T_4232982.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED (1.1mm Height)
15-21/W1D-APQHY/2T
Features
Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version.
Descriptions
The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use.
Device Selection Guide
PART No. 15-21/T1D-APQHY/2T Chip Material InGaN Emitted Color White Lens Color Yellow Diffused
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 1 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Package Outline Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 2 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Absolute Maximum Ratings (Ta=25)
Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current IFP (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. 100 mA Symbol VR IF Topr Tstg ESD Pd Rating 5 25 -40 ~ +85 -40 ~ +90 150 110 Unit V mA V mW
Electro-Optical Characteristics (Ta=25)
Parameter
Luminous Intensity Viewing Angle Forward Voltage
Symbol Iv 21/2 VF IR
Min. 45 ----2.70 -----
Typ. 72 140 2.90 -----
Max. 112 ----3.15 50
Unit mcd deg V A
Condition
IF=5mA
Reverse Current
VR=5V
Bin Range Of Luminous Intensity & Forward Voltage
Symbol IV Bin Code P Q 15 VF 16 17 Min. 45.0 72.0 2.70 2.85 3.00 Max. 72.0 112 2.85 3.00 3.15 V Unit mcd IF=5mA Condition
Notes:
1.Tolerance of Luminous Intensity 10% 2.Tolerance of Forward Voltage 0.1V
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 3 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Chromaticity Coordinates Specifications for Bin Grading IF= 5mA Groups Bin Code CIE_x 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 CIE_y 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343
1
2
3 A 4
5
6
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance 0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products.
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 4 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T CIE Chromaticity Diagram
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 5 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Typical Electro-Optical Characteristics Curves
Label explanation
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01 http://www.everlight.com Prepared date:09.08.2005 Rev 1 Page: 6 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank
RoHS
Reel Dimensions
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01 http://www.everlight.com Prepared date:09.08.2005 Rev 1 Page: 7 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Note: The tolerances unless mentioned is 0.1mm ,Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Reliability Test Items And Conditions
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01 http://www.everlight.com Prepared date:09.08.2005 Rev 1 Page: 8 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10%
No. 1
Items Reflow Soldering
Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH
Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS.
Ac/Re 0/1
2
Temperature Cycle
22 PCS.
0/1
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.
0/1
4 5 6 7
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 9 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
Precautions For Use
1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package : The LEDs should be kept at 30 or less and 70%RH or less(Floor life). However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening the package. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 10 of 11 Prepared by:
EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-APQHY/2T
4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com
Everlight Electronics Co., Ltd. Device No:SZDSE-151-T01
http://www.everlight.com Prepared date:09.08.2005
Rev 1
Page: 11 of 11 Prepared by:

▲Up To Search▲

Price & Availability of 15-21W1D-APQHY2T

	To Download 15-21W1D-APQHY2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .