![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Part Number: ZMDKVG45W www.SunLED.com 3.5x2.8mm PLCC4 SMD LED Features BOTH CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. PACKAGE: 1500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Forward Voltage (Typ.) (IF=20mA) Absolute Maximum Ratings (TA=25C) Reverse Voltage Forward Current Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature VR IF iFS PT TA Tstg MDK (InGaAlP) 5 30 185 75 -40 ~ +85 -40 ~ +85 VG (InGaA lP) 5 30 150 75 Unit V mA mA mW C Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR 1.95 2.5 10 Operating Characteristics (TA=25C) MDK (InGaAlP) VG (InGaA lP) 2.1 2.5 10 Unit V V uA P 650 574 nm D 635 570 nm 28 20 nm C 35 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 198 79 Wavelength nm P Viewing Angle 2 1/2 ZMDKVG45W Red Green InGaAlP InGaAlP Water Clear 70 18 650 574 120 Published Date : FEB 25, 2008 Drawing No : SDSA1153 V3 Checked : B.L.LIU P.1/5 Part Number: ZMDKVG45W www.SunLED.com 3.5x2.8mm PLCC4 SMD LED MDK Published Date : FEB 25, 2008 Drawing No : SDSA1153 V3 Checked : B.L.LIU P.2/5 Part Number: ZMDKVG45W www.SunLED.com 3.5x2.8mm PLCC4 SMD LED VG Published Date : FEB 25, 2008 Drawing No : SDSA1153 V3 Checked : B.L.LIU P.3/5 Part Number: ZMDKVG45W www.SunLED.com 3.5x2.8mm PLCC4 SMD LED Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25, 2008 Drawing No : SDSA1153 V3 Checked : B.L.LIU P.4/5 Part Number: ZMDKVG45W www.SunLED.com 3.5x2.8mm PLCC4 SMD LED PACKING & LABEL SPECIFICATIONS ZMDKVG45W Published Date : FEB 25, 2008 Drawing No : SDSA1153 V3 Checked : B.L.LIU P.5/5 |
Price & Availability of ZMDKVG45W
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |