 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DCSD-50 Series 50 Watt Single Output Chassis Mount DC/DC Converter FEATURES 105C Output Capacitor Low Cost, High Reliability Compact Size, Light Weight 100% Full Load Burn-In Tested Built-In EMI Filter, Low Ripple Noise High Efficiency, Low Working Temperature Short Circuit, Overload, and Over Voltage Protected SPECIFICATIONS: DCSD-50 Series All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. o INPUT SPECIFICATIONS Input Voltage DCSD-50A: DCSD-50B: DCSD-50C: DCSD-50A: DCSD-50B: DCSD-50C: 9.2 ~ 18VDC 19 ~ 36VDC 36 ~ 72VDC 7A at 12VDC 3A at 24VDC 1.5A at 48VDC DC Current OUTPUT SPECIFICATIONS Output Voltage Output Voltage Tolerance (See Note 3) Voltage Adjustability Output Current Line Regulation Load Regulation Ripple & Noise Output Power Setup, Rise Time See Table 5V outputs: 2% 12V & 24V outputs: 1% See Table See Table 5V outputs: 0.5% 12V outputs: 0.3% 24V outputs: 0.2% 5V outputs: 0.5% 12V outputs: 0.3% 24V outputs: 0.2% 5V outputs: 100mVp-p 12V outputs: 120mVp-p 24V outputs: 150mVp-p See Table 2.5s, 50ms 5V outputs: 5.75 ~ 6.75V / 10% Load 12V outputs: 16.8 ~ 20V / 10% Load 24V outputs: 31.5 ~ 37.5V / 10% Load 105%~150% Type: Foldback Current Limiting Reset: Auto recovery. See Table 1.5KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG) 500VDC / 100M (input to output, input to FG, output to FG) -10C to +60C (refer to output derating curve) -20C to +85C 20% to 90% RH 10% to 95% RH 10~500Hz, 2G 10min./1cycle, Period for 60min. each axes 0.03%/C (0C~50C) 500 grams 159(L) x 97(W) x 38(H) mm PROTECTION Over Voltage Protection Over Load Protection GENERAL SPECIFICATIONS Efficiency Withstand Voltage Isolation Resistance ENVIRONMENTAL SPECIFICATIONS Working Temperature Storage Temperature Working Humidity Storage Humidity Vibration Temperature Coefficient PHYSICAL SPECIFICATIONS Weight Dimensions SAFETY & EMC EMC Standards EN55022 CLASS B (Radiation), EN61000-4-2,3,4,6,8 ENV50204 Verification Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DCSD-50 Series 50 Watt Single Output Chassis Mount DC/DC Converter OUTPUT VOLTAGE / CURRENT RATING CHART Model DCSD-50A-5 DCSD-50A-12 DCSD-50A-24 DCSD-50B-5 DCSD-50B-12 DCSD-50B-24 DCSD-50C-5 DCSD-50C-12 DCSD-50C-24 Input Voltage 12 VDC (9.2 ~ 18 VDC) 24 VDC (19 ~ 36 VDC) 48 VDC (36 ~ 72 VDC) Output Voltage 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC Voltage Rated Output Output Adjustability Current Ripple & Noise 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 4.5 ~ 5.5VDC 11 ~ 16VDC 23 ~ 30VDC 10A 4.2A 2.1A 10A 4.2A 2.1A 10A 4.2A 2.1A 100mVp-p 120mVp-p 150mVp-p 100mVp-p 120mVp-p 150mVp-p 100mVp-p 120mVp-p 150mVp-p Output Power 50W 50.4W 50.4W 50W 50.4W 50.4W 50W 50.4W 50.4W Efficiency 70% 73% 76% 72% 75% 78% 74% 80% 83% NOTES 1. The DCSD-50 Series is designated as DCSD-50x-y where x can be A (9.2 ~ 18 VDC input voltage), B (19 ~ 36 VDC input voltage), or C (36 ~ 72 VDC input voltage) and y can be 5, 12, or 24 for output voltage. 2. All parameters are specified at rated input, rated load and 25C 70% RH. ambient. 3. Tolerance includes setup tolerance, line regulation, and load regulation. 4. Ripple & noise are measured at 20MHz using a 12" twisted pair terminated with a 0.1uF & 47uF capacitor. 5. Line regulation is measured from low line to high line at rated load. 6. Load regulation is measured from 0% to 100% rated load. DERATING CURVE STATIC CHARACTERISTICS (DCSD-50C-24) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DCSD-50 Series 50 Watt Single Output Chassis Mount DC/DC Converter MECHANICAL DRAWING Unit: mm Terminal Pin No. Assignment Pin No. Assignment 1 DC INPUT (V+) 2 DC INPUT (V-) 3 FG 4 DC OUTPUT (-V) 5 DC OUTPUT (+V) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 |
Price & Availability of DCSD-50
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |