View SPLPL85_4250657.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Impuls-Laserdiode im Plastikgehause 10 W Spitzenleistung Pulsed Laser Diode in Plastic Package 10 W Peak Power Lead (Pb) Free Product - RoHS Compliant SPL PL85
Besondere Merkmale * Kostengunstiges Plastikgehause * Zuverlassiges InGaAs/GaAs kompressiv verspanntes Halbleiter-Material * Hochleistungslaser mit Large-Optical-Cavity" (LOC) Struktur fur ein schmales Fernfeld * Laterale Austrittsoffnung 200 m Anwendungen * * * * Entfernungsmessung Sicherheit, Uberwachung Beleuchtung, Zundung Test- und Messsysteme
Features * Low cost plastic package * Reliable strained InGaAs/GaAs material * High power large-optical-cavity (LOC) structure for a narrow far-field * Lateral laser aperture 200 m
Applications * * * * Range finding Security, surveillance Illumination, ignition Test and measurement systems
Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Norm 60825-1 behandelt werden. Typ Type SPL PL85
Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 "Safety of laser products".
Opt. Spitzenausgangsleistung Opt. Peak Power 10 W
Wellenlange Wavelength 850 nm
Bestellnummer Ordering Code Q62702P1759
2007-04-04
1
SPL PL85
Grenzwerte (TA = 25 C) Maximum Ratings Parameter Parameter Spitzenausgangsleistung Peak output power Durchlastrom Forward current Pulsbreite (Halbwertsbreite) Pulse width (FWHM) Tastverhaltnis Duty cycle Sperrspannung Reverse voltage Betriebstemperatur Operating temperature Lagertemperatur Storage temperature Lottemperatur (tmax = 10 s, 2 mm von Gehauseunterseite) Soldering temperature (tmax = 10 s, 2 mm from bottom edge of case) Symbol Symbol min. Werte Values max. 13 12 100 0.1 3 + 85 + 100 + 260 W A ns % V C C C - - - - - - 40 - 40 - Einheit Unit
Ppeak IF tp
d.c.
VR Top Tstg Ts
2007-04-04
2
SPL PL85
Optische Kennwerte (TA = 25 C) Optical Characteristics Parameter Parameter Zentrale Emissionswellenlange1) Emission wavelength1) Spektrale Breite (Halbwertsbreite)1) Spectral width (FWHM)1) Spitzenausgangsleistung1) Peak output power1) Schwellstrom Threshold current Betriebsspannung1) Operating voltage1) Minimale Anstiegs- und Abfallzeit (10% ... 90%) Minimum rise and fall time (10% ... 90%) Austrittsoffnung Aperture size Strahldivergenz (Halbwertsbreite) Beam divergence (FWHM) Temperaturkoeffizient der Wellenlange2) Temperature coefficient of wavelength2) Temperaturkoeffizient der opt. Ausgangsleistung Temperature coefficient of optical power Thermischer Widerstand Thermal resistance
1)
Symbol Symbol min. peak 840 - 7 0.5 2.0 -
Werte Values typ. 850 4 10 0.75 2.5 1 max. 860 - 13 1 3.0 -
Einheit Unit nm nm W A V ns
Pop Ith Vop tr , tr
wxh
|| x / T Pop/PopT - - -
200 x 2 11 x 25 - 0.25 -0.4 - -
m2 Grad deg. nm/K %/K
Rth JA
-
160
-
K/W
Standardbetriebsbedingungen beziehen sich auf eine Pulsbreite von 100 ns bei einer Frequenz von 1 kHz und einem Betriebsstrom von 10 A bei TA = 25 C. Standard operating conditions refer to pulses of 100 ns width at 1 kHz rate with 10 A operating current at TA = 25 C.
2007-04-04
3
SPL PL85
Optical output power Popt and forward voltage VF vs. forward current IF (TA = 25 C)
4
OHW00914
Optical spectrum, relative intensity Irel vs. Wavelength (TA = 25 C, Popt = 10 W)
100 % 80
OHW00901
40 WP opt
VF V
3
rel
30
V
60
2 20
P
1 10
40
20
0
5
10
15
0 A 20
0
IF
838
842
846
850
854 nm 858
Far-field distribution parallel to junction Irel vs. || (TA = 25 C, Popt = 10 W)
1.00
OHL00746
Far-field distribution perpendicular to junction Irel vs. (TA = 25 C, Popt = 10 W)
1.00
OHL00747
Irel
0.75
Irel
0.75
0.50
0.50
0.25
0.25
0 -30
-20
-10
0
10
Deg 30
0 -40 -30 -20 -10 0
10 20 Deg 40
2007-04-04
4
SPL PL85
Mazeichnung Package Outlines
Chip position Cathode Area not flat
0.6 (0.024) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016)
2.54 (0.100) mm spacing
X
Bottom view 5.9 (0.232) 5.5 (0.217) Y
1.8 (0.071) 1.2 (0.047) 29.0 (1.142) 27.0 (1.063)
5.0 (0.197) 4.2 (0.165)
0.6 (0.024) 0.4 (0.016)
Detail X
0.1 (0.004) ... 0.7 (0.028)
Detail Y
5.1 (0.201)
Chip position
o0.3 A A
GEOY6066
5
5 3.5 (0.138) 3.7 (0.146)
Mae in mm (inch) / Dimensions in mm (inch).
2007-04-04
5
1.7 (0.067) 1.9 (0.075)
4.8 (0.189)
SPL PL85
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-04-04
6

▲Up To Search▲

Price & Availability of SPLPL85

	To Download SPLPL85 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .