View HVL43_4268059.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

High Voltage Low Inductance Thick film Resistors
HVL Series
Welwyn Components
* * * * * *
Working voltage up to 48kV Low inductance Resistance up to 4G Low temperature coefficient of resistance Low voltage coefficient Sets of resistors with matched characteristics
Electrical Data
HVL 43 Power rating at 70C Resistance range Limiting element voltage TCR (20C to 70C) Resistance tolerance Values Thermal impedance Ambient temperature range C/watt 31 watts ohms volts ppm/C % 1.5 1K to 1G 4K 8K HVL 44 3.5 1K to 2G 14K 28K 25, 50, 100 1, 2, 5 E24 preferred values 27 -55 to 155 20 HVL 45 5.0 1K to 4G 24K 48K In air In oil Values >1G: TCR is 250ppm/C Closer tolerances over restricted range Any value to special order Notes
Physical Data
Dimensions (mm) and Weight (g) PCB mounting centres 31.8 57.2 87.2 Min. bend radius 1.2 1.2 1.2 Wt. nom. 3.1 5.6 5.6
Type HVL 43 HVL 44 HVL 45
L max. 25.4 50.8 84.2
D max. 8.0 8.0 8.0
f min. 30 30 30
d nom. 0.8 0.8 0.8
d
D
L
f
Construction
A ruthenium oxide based resistive film is fired onto a high quality ceramic former. Cap and lead assemblies are force fitted to the former. The resistor is adjusted to value and the body is protected with a silicone coating.
Marking
Type reference, resistance value, tolerance and date code are legend marked. The resistance value conforms to IEC 62.
Solvent Resistance
The body protection and marking are resistant to all normal industrial cleaning solvents suitable for printed circuits.
Terminations
Material Strength Solder coated copper wire. The terminations meet the requirements of IEC 68.2.21.
Solderability The terminations meet the requirements of IEC 115-1, Clause 4.17.3.2.
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn's own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc Issue B * 03.02
(c) Welwyn Components Limited * Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com
197
High Voltage Low Inductance Thick film Resistors
HVL Series
Welwyn Components
Performance Data
Maximum Load at rated power: 1000 hours at 70C Shelf life: 12 months at room temperature Derating from rated power at 70C Noise (in a decade of frequency) Voltage coefficient of resistance V/V ppm/volt 5 5 R% R% 1 0.3 Zero at 155C <2.5 <1 Typical 0.3 0.1
Matched Sets
Resistors in a set can be supplied for use as precision voltage dividers matched for tolerance and TCR down to 0.5% and 10ppm/C. ENQUIRIES ARE WELCOMED FOR SPECIAL RESISTORS AND SETS
Application Notes
Mounting
Due to the high voltage which can appear between the end cap and any adjacent metal part, resistors should be mounted at an adequate distance from other conductors. For some high voltage applications it is required to immerse the components in oil or gas to reduce the effects of corona and surface tracking. The protective coating is suitable for these applications. The axial termination should not be bent closer than twice the diameter of the terminal wire from the body of the resistor. When the resistors are required to be plotted, the preferred encapsulant is a silicone compound. For voltage dividers with a low resistance section below the minimum available value of 1k ohms, it is normal practice to use a Welwyn resistor, RC Series, obtainable down to 1ohm.
Packaging
Resistors are supplied packed in boxes.
Standard Quantities Per Box
All Types 10 or 20 per box
(c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com 198
Issue B * 03.02

▲Up To Search▲

Price & Availability of HVL43

	To Download HVL43 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .