 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Part No: CEM-1206S Description: magnetic buzzer Date: 8/14/2006 Unit: mm Page No: 1 of 5 Specifications Rated voltage Operating voltage Mean current Coil resistance Sound output 5.0 Vo-p 3.0 - 8.0 Vo-p 45 mA max. 47 7.0 Min. 85 (Typical 92) dBA Applying rated voltage, 2400 Hz square wave, 1/2 duty Distance at 10cm (A-weight free air). Applying rated voltage of 2400 Hz, square wave, 1/2 duty. Rated frequency Operating temperature Storage temperature Dimensions Weight Material Terminal RoHS 2,400 Hz -30 ~ +70 C -40 ~ +85 C o12.0 x H9.5 mm 1.6 g PBT (Black) Pin type (Plating Au) yes See attached drawing See attached drawing Frequency Response Curve Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1206S Description: magnetic buzzer Date: 8/14/2006 Unit: mm Page No: 2 of 5 Appearance Drawing Tolerance: 0.5 Measurement Method Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1206S Description: magnetic buzzer Date: 8/14/2006 Unit: mm Page No: 3 of 5 Mechanical Characteristics Item Solderability Evaluation Standard Test Condition 90% min. of lead terminals should Lead terminals are immersed in rosin for 5 be wet with solder. (Except the seconds and then immersed in solder bath edge of the terminal) of 270 5C for 3 1 seconds. Lead terminals are immersed up to 1.5mm from the buzzer's body in solder bath of 260 5C for No in interference in operation. 3 1 seconds. Apply force of 9.8 N (1.0 kg) to the terminal for No damage or cutting off. 10 seconds. The buzzer will be measured after applying After the test, the part should a vibration amplitude of 1.5 mm with 10 to meet specifications without any 55 Hz band of vibration frequency to each of damage to the appearance and the 3 perpendicular directions for 2 hours. the SPL should be within The part is to be dropped from a height of 10 dBA of the initial SPL. 75 cm onto a 40 mm thick wooden board 3 times in 3 axis (X, Y, Z) for a total of 9 drops. Soldering Heat Resistance Terminal Mechanical Strength Vibration Drop Test Environment Test Item High temp. test Low temp. test Thermal shock Test Condition The part will be subjected to +85C for 96 hours. The part will be subjected to -40C for 96 hours The part will be subjected to 10 cycles. One cycle will consist of: Evaluation Standard Temp./Humidity cycle The part shall be subjected to 10 cycles. One cycle will be 24 hours and consist of: After the test, the part shall meet specifications without any damage to the appearance and performance except SPL. After 4 hours at +25C, the SPL should be within 10 dBA of the initial SPL. Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1206S Description: magnetic buzzer Date: 8/14/2006 Unit: mm Page No: 4 of 5 Reliability Tests Item Operating (Life Test) Test Condition 1. Continous life test: The part will be subjected to 72 hours at 55C with 5 V, 2400 Hz applied. 2. Intermittent life test: A duty cycle of 1 minute on, 1 mintue off, a minimum of 10,000 times at room temp. (2510C) with 5 V, 2400 Hz applied. Evaluation Standard After the test, the part shall meet specifications without any damage to the appearance and performance except SPL. After 4 hours at +25C, the SPL should be within 10 dBA of the initial SPL. Test Conditions Standard Test Condition Judgement Test Condition a) Tempurature: +5 ~ +35C a) Tempurature: +252C b) Humidity: 45 - 85% b) Humidity: 60 - 70% c) Pressure: 860 - 1060 mbar c) Pressure: 860 - 1060 mbar Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 Part No: CEM-1206S Description: magnetic buzzer Date: 8/14/2006 Unit: mm Page No: 5 of 5 Packaging Phone: 800.275.4899 Fax: 503.612.2381 www.cui.com 20050 SW 112th Ave. Tualatin, OR 97062 |
Price & Availability of CEM-1206S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |