 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IW4011B Description The IW4011B NAND gates provide the system designer with direct implementation of the NAND function. Features Operating Voltage Range: 3.0 to 18 V at 18 V over full packageMaximum input current of 1 temperature range 100 nA at 18 V and 25 C Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply 14 1 SOP 14 14 1 DIP 14 Package Logic Diagram A B C D E F G H 1 2 5 Pin Assignment A B J K C 1 2 3 4 5 14 13 12 11 10 9 VDD H G M L F E 3 J 4 6 8 K D Vcc 6 7 10 9 12 L 11 13 M PIN 14 = V DD PIN 7 = Vcc BEIJING ESTEK ELECTRONICS CO.,LTD 1 IW4011B Absolute Maximum Ratings Symbol VCC VIN IIN PD Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Input Current, per Pin Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ PD Tstg TL Power Dissipation per Output Transistor Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/ C from 65 to 125C SOIC Package: - 7 mW/ C from 65to 125C 100 -65 to +150 260 mW C C Value -0.5 to +20 -0.5 to V CC +0.5 10 750 500 mW Unit V V mA Recommended Operating Conditions Symbol VCC VIN, VOUT Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Operating Temperature, All Package Types Min 3.0 0 -55 Max 18 CC Unit V V C V TA +125 This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and V should be constrained to the range GND (VIN or OUT VOUT) VCC . Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or V CC). Unused outputs must be left open. BEIJING ESTEK ELECTRONICS CO.,LTD 2 IW4011B DC Electrical Characteristics (Voltages Referenced to GND) VCC Symbol Parameter Test Conditions V Guaranteed Limit -55C 25C 125 C VIH Minimum High-Level Input Voltage VOUT=0.5 V or V CC - 0.5 V VOUT=1.0 V or V CC - 1.0 V VOUT=1.5 V or V CC - 1.5 V VOUT= VCC - 0.5V VIL Maximum Low -Level Input Voltage VOUT= VCC - 1.0 V VOUT= VCC - 1.5V VIN=GND or VCC 5.0 10 15 5.0 10 15 VOH Minimum High-Level Output Voltage 5.0 10 15 VOL Maximum Low-Level Output Voltage VIN= VCC 5.0 10 15 IIN Maximum Input Leakage Current ICC Maximum iescent Q u VIN= GND or VCC 5.0 10 15 20 0.25 0.5 1.0 5.0 0.25 0.5 1.0 5.0 7.5 15 30 150 mA 5.0 10 15 0.64 1.6 4.2 0.51 1.3 3.4 0.36 0.9 2.4 mA 5.0 5.0 10 15 -2.0 -0.64 -1.6 -4.2 -1.6 -0.51 -1.3 -3.4 -1.15 -0.36 -0.9 -2.4 A VIN= GND or VCC 18 3.5 7 11 1.5 3 4 4.95 9.95 14.95 0.05 0.05 0.05 0.1 3.5 7 11 1.5 3 4 4.95 9.95 14.95 0.05 0.05 0.05 0.1 3.5 7 11 1.5 3 4 4.95 9.95 14.95 0.05 0.05 0.05 1.0 A V V V V Unit Supply Current (per Package) IOL Minimum Output Low VIN= GND or VCC UOL=0.4 V (Sink) Current UOL=0.5 V UOL=1.5 V VIN= GND or VCC IOH Minimum Output High (Source) Current UOH=2.5 V UOH=4.6 V UOH=9.5 V UOH=13.5 V BEIJING ESTEK ELECTRONICS CO.,LTD 3 IW4011B AC Electrical Characteristics (C L =50pF, RL =200 k , Input t r =t f =20 ns) VCC Guaranteed Limit V 5.0 10 15 tTLH, tTHL Maximum Output Transition Time, Any Output (Figure 1) 5.0 10 15 CIN Maximum Input Capacitance -55C 250 120 90 200 100 80 25C 125C 250 120 90 200 100 80 7.5 250 120 90 200 100 80 pF ns Unit ns Symbol tPLH, tPHL Parameter Maximum Propagation Delay, Input A or B to Output (Figure 1) t INPUT A OR B 90% 50% 10% tr f VCC GND t PHL tPLH OUTPUT J 90% 50% 10% VCC GND t t Figure 1. Switching Waveforms Expanded Logic Diagram (1/4 of the Device) A J B Address : Postalcode:100039 Tel: 86-010-58895780 / 81 / 82 / 83 / 84 Http://www.estek.com.cn Email:sales@estek.com.cn 6A06--6A07 Rm 6A07,Changyin Office Building ,No.88,Yong Ding Road,Hai Dian District ,Beijing Fax : 010-58895793 REV No:01-060831 BEIJING ESTEK ELECTRONICS CO.,LTD 4 |
Price & Availability of IW4011B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |