 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| celduc(R) r e l a i s S/CON/SOM06075/A/12/02/07 PRELIMINARY DATA Page 1/5 UK MOSFET BASED DC SOLID-STATE RELAY (With built-in transient voltage suppressor) Latest MOSFET technology generation. Ultra low on-state resistance. Low output leakage current. Low control current consumption. Built-in overvoltage protection (TVS) SOM06075 Reverse protected triggered control input to avoid linear control range Max transient peak risks No radiated or conducted disturbances Touch protected housing IP20 DC Mains voltage range Load current range (with heatsink) Control voltage 3.5-32VDC 75V 40VDC 60ADC Weight voltage Max. DC Mains peak voltage Max. Load Current (with heatsink) Dimensions (WxHxD) 45 x 58.5 x 30 Control input voltage range In & case / Out Insulation Connections 5-40VDC (75Vpeak) Fig. 1 Up to 60A 3.5-32VDC 2.5kV Fig. 2 Screw terminals 80g HIGH SIDE WIRING DIAGRAM (Load connected to "-") LOW SIDE WIRING DIAGRAM (Load connected to "+") Please consult us to select the right protective components C1 & D2. (see also accessory list page 5) The red paths (C1/D2) must be as short as possible ! Please consult us to select the right protective components C1 & D2. (see also accessory list page 5) The red paths (C1/D2) must be as short as possible ! Fig. 3 INTERNAL DIAGRAM Proud to serve you Data given at Tambient=25C and subject to modification without previous notice r celduc e l a i (R) s celduc(R) r e l a i s S/CON/SOM06075/A/12/02/07 PRELIMINARY DATA Page 2/5 UK CONTROL INPUT CHARACTERISTICS CHARACTERISTIC LABEL Ucnom Icnom Uc Ic Ucoffmax -Ucmax Rin VALUE 12-24VDC 35mADC 3.5 - 32VDC 32 - 35mADC 1VDC 32VDC Current limitation -100A/C typical=3.3V See curve Typical= 2.6V INFO. Fig. 4 Ic (mADC) 50 45 40 35 30 25 20 15 10 CONTROL CURRENT vs. CONTROL VOLTAGE -35C -35C 25C 100C INPUT CIRCUIT Nom. Control voltage Nom. Control current Control voltage range Control current consumption Releasing control voltage Max. reverse control voltage Input impedance -Icmax <100A 5 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Uc (VDC) See curve TIME CHARACTERISTICS TIME CHARACT. CHARACTERISTIC Turn on time Turn on delay Turn off time Turn off delay Max. On-Off frequency LABEL ton tdon toff tdoff F(on-off) VALUE 20s 20s 20s 20s >1000Hz For high frequency, take 2 x Ie to calculate the heatsink; the protections must be chosen carefully. Please consult us if any. POWER OUTPUT CHARACTERISTICS CHARACTERISTIC Nominal voltage Voltage range Non-repetitive peak voltage Overvoltage protection Off-state max reverse voltage drop (internal diode) Maximum nominal currents Max. non-repetitive peak current LABEL Uenom Ut Utp D1 -Ut Ie max Iepeak Iemin Ielk max RDSon Cout Rthjc Rthra Tthra Uimp Uimp Uimp Rio Cio Tjmax Tstg Tamb Tc 4.5mOhms @Tj=25C Resistive 60A Switch OFF D<1% Switch OFF Fmax VALUE 24VDC 5-40VDC 75V 39V (Transient voltage suppressor) 0.92V Motor Please contact us ON-state INFO. Ue Utmax=40VDC 1500W / 1ms See fig.10 & 11 @Ie=75A & @Uc=0 See fig. 6 See fig. 9 @Tc=100C @Tj=175C @Utp (See POWER CIRCUIT 294A 60A 5mA 3mA 750A fig. 8) Min. load current Max. leakage current Max. on-state resistance Typ. output capacitance Junction/case thermal resistance per power element Built-in heatsink thermal resistance vertically mounted Heatsink thermal time constant Control inputs/power outputs insulation voltage Inputs/case insulation voltage Outputs/case insulation voltage Isolation resistance Isolation capacitance Maximum junction temperature Storage ambient temperature Operating ambient temperature Max. case temperature @Utmax @Tjmax @Iemax 8.2mOhms @Tj=125C 1.5nF 1.2K/W 10K/W 10 minutes 2.5kV 2.5kV 2.5kV 1G <8pF 175C @Utp @Tra=75C @Tra=60C -40->+100C -25->+90C 100C See fig. 9 celduc(R) r e l a i s S/CON/SOM06075/A/12/02/07 PRELIMINARY DATA Page 3/5 UK OUTPUT SWITCH CHARACTERISTIC CURVES Fig. 5 ON RESISTANCE VS JUNCTION TEMPERATURE Fig. 6 1000 -Ie (A) REVERSE VOLTAGE DROP VS REVERSE CURRENT RDSon 12 (mOhms) 10 8 100 Uc=0 ; Tj=125C 6 4 2 0 -50 0 50 100 150 10 Uc0 ; Tj=125C 1 -Ut (V) 0,1 0 0,5 1 1,5 2 2,5 3 Tj (C) Fig. 7 Zthjc (K/W) 0,35 0,3 0,25 0,2 0,15 0,1 0,05 0 0,0001 POWER ELEMENT TRANSIENT THERMAL IMPEDANCE vs. PULSE DURATION Fig. 8 800 700 600 500 ON-STATE PEAK OVERLOAD CURRENT vs. PULSE DURATION Ie (Apk) Non-repetitive D=1% (Tc=100C, Tjm ax=175C) Repetitive D=5% (Tc=100C, Tjm ax=175C) Repetitive D=10% (Tc=100C, Tjm ax=175C) Repetitive D=20% (Tc=100C, Tjm ax=175C) D=50% D=20% D=10% D=5% D=2% D=1% Single pulse 0,001 0,01 0,1 t (s) 1 400 300 200 100 0 0,0001 Repetitive D=50%(Tc=100C, Tjm ax=125C) 0,001 0,01 0,1 Pulse 1 Duration (s) Fig. 9 Permanent current Ie (ARMS) POWER DISSIPATED AND LOAD CURRENT LIMIT VS TEMPERATURE Please refer to the installation notice for precautions about mounting the device on a heatsink. 0.75K/W Power dissipated Pd (W) 65 60 55 50 45 40 35 30 25 20 15 10 5 0 0 10 20 10K/W 34.8 29.7 24.9 0.55K/W 0.3K/W 20.6 16.7 13.2 10.1 7.42 5.15 3.3 1.85 0.82 4K/W 2.2K/W 2.1K/W 1.2K/W 1.1K/W 0.9K/W 0.21 0 90 Ambient temperature (C) 30 40 50 60 70 80 100 110 10K/W = No Heatsink / 1LD12020 2.1K/W = WF210000 0.9K/W = WF115100 4K/W = 150x150x3mm aluminium sheet 1.2K/W = WF121000 0.75K/W = WF070000 2.2K/W = WF262100 / WF151200 1.1K/W = WF131100 0.55K/W = WF050000 0.3K/W = WF031100 celduc(R) r e l a i s S/CON/SOM06075/A/12/02/07 PRELIMINARY DATA Page 4/5 UK BUILT-IN OVERVOLTAGE PROTECTION CHARACTERISTICS Fig. 10 Ielk / Ie LEAKAGE CURRENT (Ielk) VS DC OUTPUT SWITCH VOLTAGE (Ut) 1 Fig. 11 OVERVOLTAGE DURATION AND FREQUENCY ABSOLUTE LIMITS Uto < Utp t max = 0.75 (Uto - Ut max) x Ie 0,8 0,6 0,4 0,2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 Ut (V) U t max ( =U emax) Utp P ( protection ) = 1W max (Uto - Ut max) x Ie x t 1 T Utmax : Max. nominal voltage of the relay Uto : Possible overvoltage above Utmax Utn = Ue : User DC power supply voltage t : Overvoltage duration T: Time between 2 overvoltage Ielk : Leakage current of the relay Ie : User load nominal current Utp : Relay max. non repetitive peak voltage GENERAL INFORMATION CONNEC TIONS Connections Screwdriver advised Min and max tightening torque Insulated crimp terminals (round tabs, eyelet type) Display 2 N.m M5 Power POZIDRIV2 1.2 N.m M4 Control Green LED (indicates relay has switched ON) UL94V0 2 screws (M4x12mm ; tightening = 1.2N.m) None 80g See mounting sheet MISC. Housing Mounting Noise level Weight STANDARDS GENERAL Standards Protection level Protection against direct touch CE marking UL, cULUS and VDE approvals TYPE OF TEST STANDARD EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-11 IEC60947-1 IP20 Yes Yes Pending LEVEL Pending Pending Pending Pending EFFECT ? ? ? ? E.M.C. IMMUNITY E.M.C. EMISSION E.S.D. (Electrostatic discharges) Radiated electromagnetic fields Fast transients bursts Electric chocks Voltage drop Radiated and conducted disturbances NFEN55011 Pending celduc(R) r e l a i s S/CON/SOM06075/A/12/02/07 PRELIMINARY DATA Page 5/5 UK DIMENSIONS AND ACCESSORIES Fig. 12 DIMENSIONS (mm) 2/ - 1/+ ACCESSORIES FLAT TAB CONNECTION ADAPTORS 1L587000 READY TO USE OVERVOLTAGE PROTECTION ESO01000 (Please check our website for availability) This device includes a diode (D2) and a capacitor (C1) suitable for most of the DC application. To be mounted close to the SOM. Please consult our website for other accessory references (Heatsinks, mounting adaptors, thermal grease...) r celduc(R) e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - France Phone : 33 (0) 4 77 53 90 20 Fax : 33 (0) 4 77 53 85 51 Email : celduc-relais@celduc.com |
Price & Availability of SOM06075
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |