|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com Renesas Technology Corp. Customer Support Dept. April 1, 2003 Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. HA12230NT Audio Signal Processor for Cassette Deck ADE-207-322E (Z) 6th Edition Nov. 2000 Description HA12230NT is silicon monolithic bipolar IC providing PB equalizer, REC equalizer system and each electronic control switch in one chip. Functions * PB equalizer x 2 channel * REC equalizer x 2 channel * MS use Mixing Amp. * Each electronic control switch to change tape type and mute etc. * REC mute * REC head return switch * Line Amp. * Line mute Features * REC equalizer is very small number of external parts, built-in 2 types of frequency characteristics * PB equalizer circuit built-in * REC/PB are possible with TYPE I/II * Controllable from direct micro-computer output * Available to reduce substrate-area because of high integration and small external parts HA12230NT Pin Description, Equivalent Circuit (VCC = 12 V, Ta = 25C, No signal, The value in the table show typical value.) Pin No. 17 16 Pin Name VCC RECOUT(L) Note V = VCC V = VCC/2 VCC Equivalent Circuit Pin Description VCC pin REC-EQ output GND 15 10 1 30 RECOUT(R) MAOUT VREF REC-RETURN V = V' = VCC/2 VCC MS Amp. output Reference REC return V pin 3, pin 29 I GND , 30 V 29 3 28 BIN(L) BIN(R) AIN(L) V = VCC/2 VCC PB B deck input PB A deck input PB-NF 4 11 AIN(R) MAI V = VCC/2 MAOUT 100 k V 45 k VCC/2 VCC MS Amp. input Rev.6, Nov. 2000, page 2 of 32 HA12230NT Pin Description, Equivalent Circuit (VCC = 12 V, Ta = 25C, No signal, The value in the table show typical value.) (cont) Pin No. 23 Pin Name PBOUT(L) Note V = VCC/2 Equivalent Circuit VCC Pin Description PB output V GND 9 25 7 26 PBOUT(R) EQOUT(L) EQOUT(R) PB-EQ(L) V = VCC/2 VCC EQ output (120 ) EQ output (70 ) V EQOUT GND 6 13 PB-EQ(R) RECIN(R) V = VCC/2 VCC REC-EQ input 100 k VCC/2 18 24 8 19 RECIN(L) TAI(L) TAI(R) MUTE I = 20 A I VCC Tape input Mode control input 22 k 100 k GND 20 21 22 A 120/70 A/B B I/II Rev.6, Nov. 2000, page 3 of 32 HA12230NT Pin Description, Equivalent Circuit (VCC = 12 V, Ta = 25C, No signal, The value in the table show typical value.) (cont) Pin No. 12 Pin Name IREF Note V = 1.2 V Equivalent Circuit Pin Description Equalizer reference current input 2 27 GND PB-NF(L) PB-IN = Vref VCC GND pin PB EQ feed back PB-IN 180 7 330 k 5 14 PB-NF(R) RIP PBOUT = Vref VCC NAB output V GND Rev.6, Nov. 2000, page 4 of 32 Block Diagram PBOUT(L) RECIN(L) RECOUT(L) + REC Return PB-NF(L) PB-EQ(L) EQOUT(L) TAI(L) + B I/II A/B A120/70 MUTE 30 REC-EQ - + 29 28 27 26 25 24 23 22 21 20 19 18 VCC 17 BIN(L) AIN(L) 120/70 Mute A - + REC Return + - B LPF + - REC Return Mute 120/70 + - B A + - Vref GND 1 + 2 BIN(R) 3 AIN(R) 4 5 6 7 8 9 10 11 12 MAI IREF TAI(R) PB-NF(R) PB-EQ(R) EQOUT(R) HA12230NT Rev.6, Nov. 2000, page 5 of 32 PBOUT(R) MAOUT RECIN(R) + 16 REC-EQ 13 + RIP 14 + 15 + RECOUT(R) Unit R : C:F HA12230NT Parallel Data Format Pin No. 19 20 21 Pin Name MUTE A 120/70 A/B Lo MUTE OFF * B Return SW OFF REC Mute ON REC-EQ * TYPE I A/B B 120/70 A 120 Low Low High High B I/II Low High Low High Lo 120 70 120 70 Mid 120 120 70 70 Hi 120 120 70 70 Mid -- -- A Return SW ON REC Mute ON -- Hi MUTE ON * A Return SW ON REC Mute OFF REC-EQ * TYPE II 22 B I/II Note: PB-EQ 120/70 logic Rev.6, Nov. 2000, page 6 of 32 HA12230NT Functional Description Power Supply Voltage Range HA12230NT is designed to operate on single supply, shown by table 1. Table 1 Item Single Supply Operating Power Supply Voltage Power Supply Voltage Range 6.5 V to 15.0 V Reference Voltage These devices provide the reference voltage of half the supply voltage that is the signal grounds. As the peculiarity of these devices, the capacitor for the ripple filter is very small about 1/100 compared with their usual value. The block diagram is shown as figure 1. + - + - + - + - 17 VCC Line Amp. block MS mixing Amp. block Lch REC-EQ block Rch REC-EQ block PB-EQ block 1 14 2 + 1 F + - Figure 1 The Block Diagram of Reference Supply Voltage Rev.6, Nov. 2000, page 7 of 32 HA12230NT Operating Mode Control HA12230NT provide fully electronic switching circuits. And each operating mode control is controlled by parallel data (DC voltage). Table 2 Pin No. 19, 20, 22 Threshold Voltage (Vth) Lo 0.0 to 0.5 Mid -- Hi 2.4 to VCC Unit V Test Condition Input Pin Measure V 21 Note: 0.0 to 0.5 1.2 to 1.8 2.4 to VCC V 1. Each pins are on pulled down with 100 k internal resistor. Therefore, it will be low-level when each pins are open. 2. Over shoot level and under shoot level of input signal must be the standardized. (High: VCC, Low: -0.2 V) Block Diagram Figure 2 shows the block diagram. As this IC is built-in REC return switch, the configuration system can be simple system using a few external component and the REC/PB head. About these logics, please look at the Parallel Data Format. REC-OUT(L) 16 2.2 8.2 k + REC - EQ REC-IN(L) 18 0.47 5.1 k + 30 B head BIN(L) AIN(L) A head Return SW 29 28 B A 180 Vref 22 k 27 26 15 k 5.1 k + - 330 k To 24 120/70 0.1 5.1 k 25 EQOUT(L) 0.01 Unit R : C:F Figure 2 Block Diagram (Lch) Rev.6, Nov. 2000, page 8 of 32 HA12230NT Level Diagram The gain establishment of PB-EQ considers PB output level {(internal Line Amp. + PB Amp.) = 580 mV (Dolby Level)} like figure 3 at the target. After replace RA and RB with a half-fix volume, adjust level. Regarding REC-EQ adjust the gain in front of input to this IC. The level diagram of 1 kHz is shown figure 3. Similarly to PB, it consider Dolby level as a standard. And R1 needs the value more than 5.6 k. Because mode establishment resistances are built-in, REC-EQ frequency characteristics are respectively fixed value. In case the change of the frequency characteristics are necessary, please inquire the responsible agent because the adjustment of resistors is necessary. 0.6 mV PB-EQ Line Amp. 25.7 dB 41.2 dB 68 mV 30 mV RA RB 580 mV Figure 3 PB System Level Diagram Line Mute HA12230NT is built-in with mute circuit to Line Amp. A mute control does with High/Low of pin 19. Reducing pop noise is so much better 10 k to 22 k resistor to pin 19 in series and 1 F to 22 F capacitor. A mute is not built-in when doing a power ON/OFF. Please correspond to it, on the side of a set system. Test Mode Test mode becomes if it is resistor less than 10 k of pin 12. Please use resistor of 22 k on the occasion of mount. Rev.6, Nov. 2000, page 9 of 32 HA12230NT Music Sensor Mixing Block * Gain with TAI to MAOUT Case of one-side input, gain with TAI to MAOUT is attenuations 6 dB. GV = (L R signal addition circuit) + (MS Amp. gain) + (TAI one-side input attenuations) = 20 + 20log 24.2 (dB) 100 k + 45 k + (-6) 45 k For a necessary case, please in series add CR to MAI terminal for gain regulation. 24 TAI(L) 1k Mute 18.4 k - + 23 x1 L R signal addition circuit + - -6dB x1 Mute 1k 8 TAI(R) 30 mVrms Line Amp. + - 18.4 k 9 PBOUT(R) 580 mVrms Figure 4 Music Sensor Mixing Amp. Block Diagram Rev.6, Nov. 2000, page 10 of 32 + PBOUT(L) MS Amp. + - LPF 25 kHz 10 MAOUT 20 dB 45 k 100 k 11 MAI + HA12230NT Absolute Maximum Ratings (Ta = 25C) Item Maximum supply voltage Power dissipation Operating temperature Storage temperature Operating voltage Symbol VCC max Pd Topr Tstg Vopr Rating 16 500 -40 to +75 -55 to +125 6.5 to 15 Unit V mW C C V Ta 75C Note Note: HA12230NT operates on single supply voltage. Rev.6, Nov. 2000, page 11 of 32 (Ta = 25C, VCC = 12 V, PBIN Standard Level = 0.6 mVrms at 1 kHz, LineIN Standard Level = 30 mVrms, LineOUT Standard Level = 580 mVrms) Test Condition Specification Input Output Application Terminal IC Condition HA12230NT Item Quiescent current Logical threshold Symbol PB-REC crosstalk Rev.6, Nov. 2000, page 12 of 32 Min 15.0 -0.2 1.2 2.4 50.0 60.0 38.2 35.2 31.0 0.3 Typ 22.5 60.0 70.0 41.2 38.2 34.0 0.6 Max Unit 33.0 mA 0.5 V 1.8 V VCC V dB dB 44.2 dB 41.2 dB 37.0 dB Vrms R L 13 18 4 28 4/3 28/29 4 28 4 28 4/3 28/29 R 9 15 7 7 7 7 ReL COM mark 17 19~22 21 19~22 23 16 25 25 25 2 25 Rg = 820, DIN-AUDIO 120 120 120 120 120 120 120 120 120 OFF OFF OFF OFF OFF OFF OFF OFF ON THD = 1% 2.4 6.0 6.0 30.0 30.0 30.0 120.0 0.2 90 60.0 70.0 25.7 0.05 1.40 24.2 80.0 1k 1k 1k 1k 1k 1k 1k 1k 50.0 60.0 24.2 1.16 22.7 70.0 4/3 28/29 7 0.5 % 180 Vrms 4/3 28/29 7 4/3 28/29 9 dB 4/3 28/29 9 dB 8 9 27.2 dB 24 8 9 0.30 % 24 9 Vrms 8 24 8 25.7 dB 24 dB 8 9 24 25 25 23 23 23 23 23 23 10 2 Electrical Characteristics PB-EQ gain PB-EQ maximum output level A/B A IQ VIL VIM VIH CT PB/REC(1) A CT PB/REC(2) A A/B GV PB(1) A GV PB(2) A GV PB(3) Vomax PB A/B fin Vin B I/II A120/70 MUTE (Hz) (mVrms) Other I 70 No signal OFF I 120 1k 1 REC-EQ PB-EQ OFF I 120 1k 6.0 PB-EQ REC-EQ OFF I 120 1k 0.6 OFF I 120 0.6 OFF 10k II 70 0.6 OFF 10k I 120 1k THD = 1% OFF PB-EQ THD PB-EQ noise voltage PB-EQ channel separation PB-EQ crosstalk Line AMP gain Line AMP THD Line AMP maximum output level MS AMP gain Line MUTE attenuation THD PB VN PB CT R/L(1) CT A/B GV LA THD LA Vomax LA GV MS L-MUTE ATT A/B A/B A/B A/B A A A A A I I I I I I I I I Notes: 1. Large level without clipping 2. VCC = 6.5 V (Ta = 25C, VCC = 12 V, EQIN Standard Level = -20 dBs = 77.5 mVrms) Test Condition Specification Other Input Output Application Terminal IC Condition Item REC-EQ frequency characteristics TYPE I REC-EQ frequency characteristics TYPE II REC-EQ channel separation 120 120 120 120 THD = 1% Rg = 5.1k, A-WTG 66.0 0.7 56.0 13 13 13 13 18 18 18 18 15 15 15 15 I I I I OFF OFF OFF OFF 1k 1k 1k 1k 1 77.5 16 16 16 16 76.0 dB 1.0 Vrms 0.2 0.5 % 59.0 dB Symbol GV REC-NN1 GV REC-NN2 GV REC-NN3 GV REC-NC1 GV REC-NC2 GV REC-NC3 CT R/L(2) 2 A/B A A A A A A A Typ 15.0 17.25 28.0 19.5 22.5 32.0 70.0 Max Unit 16.5 dB 19.25 dB 31.0 dB 21.0 dB 24.5 dB 35.0 dB dB R 13 13 13 13 13 13 13 L 18 18 18 18 18 18 18 R 15 15 15 15 15 15 15 B I/II A120/70 MUTE OFF I 120 OFF I 120 OFF I 120 OFF II 120 OFF II 120 OFF II 120 OFF I 120 fin Vin (Hz) (mVrms) 1k 7.75 5k 7.75 12.5k 7.75 1k 7.75 5k 7.75 12.5k 7.75 1k 1 Min 13.5 15.25 25.0 18.0 20.5 29.0 61.0 ReL COM mark 16 16 16 16 16 16 16 Electrical Characteristics (cont) REC-MUTE attenuation REC-EQ maximum output level REC-EQ THD REC-EQ S/N R-MUTE ATT Vomax REC THD REC S/N REC MID A A A Notes: 1. Large level without clipping 2. VCC = 6.5 V HA12230NT Rev.6, Nov. 2000, page 13 of 32 EQ PB EQ PB DC VCC (+12V) + C10 SOURCE1 100 SW11 R13 10k Lch M H L SW14 C12 0.47 + + C11 2.2 R11 5.1k R10 5.6k Rch C15 M H L SW17 SW16 SW15 L L H H M M 0.1 PB SW18 + + 0.47 TAI C13 2.2 C14 R12 10k DC +3.0V DC (+1.5V) SOURCE3 SOURCE2 SW9 REC Test Circuit HA12230NT SW7 REC SW5 R14 5.1k C16 0.01 R15 5.1k Bin Ain B I/II A/B TAI(L) BIN(L) AIN(L) PB-NF(L) A120/70 MUTE PB-EQ(L) REC Return EQOUT(L) PBOUT(L) - + A Mute - + REC Return + - B LPF + - Lch MA SW13 Rch Lch RECOUT(L) 120/70 RECIN(L) Vref GND BIN(R) AIN(R) PB-NF(R) PB-EQ(R) EQOUT(R) TAI(R) PBOUT(R) MAOUT MAI IREF RECIN(R) 1 SW19 + C3 0.01 0.1 R3 5.1k R4 5.1k PB C4 2 3 4 5 6 7 8 9 10 11 R7 22k 12 13 + C7 0.47 RIP 14 C8 1 R8 5.1k + 15 C9 + 2.2 R9 5.6k + C1 R1 C2 R2 22 820 22 820 C6 + 2.2 TAI +C5 R6 0.47 10k R5 10k Bin Ain EQ PB REC SW8 EQ SW6 PB REC SW10 RECOUT(R) Rev.6, Nov. 2000, page 14 of 32 27 REC-EQ 26 25 24 23 22 21 20 19 18 17 VCC 16 AC VM2 Distortion analyzer + - C18 R17 C17 R16 22 820 22 820 30 29 SW2 ON REC SW3 SW1 AUDIO SG TAI PB OFF AC VM1 Rch REC Return B A 120/70 + - SW4 Lch Rch + + 28 Mute Oscillo scope Noise meter REC-EQ Rch Lch SW12 DC VM1 Unit R : C:F HA12230NT Characteristic Curves Quiescent Current vs. Supply Voltage 25 A120 A120 A70 A70 Quiescent Current ICC (mA) MUTE-OFF MUTE-ON MUTE-OFF MUTE-ON 20 B NORM B NORM B CROM B CROM 15 MUTE-OFF MUTE-ON MUTE-OFF MUTE-ON 10 6 8 10 12 Supply Voltage (V) 14 16 -20 Crosstalk vs. Frequency (REC-EQPB-EQ) RECinPBOUT VCC = 12 V Vin = 17 dB -40 Crosstalk (dB) -60 NN -80 NC -100 -120 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 15 of 32 HA12230NT -20 AinRECOUT VCC = 12 V Vin = 6 mVrms -40 NC Crosstalk vs. Frequency (PB-EQREC-EQ) Crosstalk (dB) -60 NN -80 -100 -120 10 100 1k Frequency (Hz) 10k 100k PB-EQ Gain vs. Frequency 70 60 PB-EQ Gain (dB) 50 A120 40 30 Ain EQOUT Bin VCC = 12 V 20 10 100 1k Frequency (Hz) 10k A70 100k Rev.6, Nov. 2000, page 16 of 32 HA12230NT PB-EQ Maximum Output Level vs. Supply Voltage (1) 5 PB-EQ Maximum Output Level Vomax (Vrms) 4 NN Ain EQOUT Bin T.H.D. 1% 100 Hz 1 kHz 10 kHz 3 2 1 6 8 10 12 Supply Voltage (V) 14 16 PB-EQ Maximum Output Level vs. Supply Voltage (2) 5 PB-EQ Maximum Output Level Vomax (Vrms) 4 NC Ain EQOUT Bin T.H.D. 1% 100 Hz 1 kHz 10 kHz 3 2 1 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 17 of 32 HA12230NT PB-EQ Total Harmonic Distortion vs. Supply Voltage (1) 10 PB-EQ Total Harmonic Distortion T.H.D. (%) NN Ain Bin EQOUT 1.0 100 Hz 1 kHz 10 kHz Vout = 240 mVrms 0.1 0.01 6 8 10 12 Supply Voltage (V) 14 16 PB-EQ Total Harmonic Distortion vs. Supply Voltage (2) 10 PB-EQ Total Harmonic Distortion T.H.D. (%) NC Ain Bin EQOUT 1.0 100 Hz 1 kHz 10 kHz Vout = 240 mVrms 0.1 0.01 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 18 of 32 HA12230NT PB-EQ Total Harmonic Distortion vs. Output Level (1) 100 PB-EQ Total Harmonic Distortion T.H.D. (%) VCC = 12 V Ain A120 EQOUT Bin BNormal Vout = 60 mVrms = 0 dB 10 100 Hz 1 kHz 5 kHz 7 kHz 10 kHz 1 0.1 0.01 -5 0 5 10 15 20 25 Output Level Vout (dB) 30 35 40 PB-EQ Total Harmonic Distortion vs. Output Level (2) 100 PB-EQ Total Harmonic Distortion T.H.D. (%) VCC = 12 V Ain A70 EQOUT Bin BCrom Vout = 60 mVrms = 0 dB 10 100 Hz 1 kHz 5 kHz 7 kHz 10 kHz 1 0.1 0.01 -5 0 5 10 15 20 25 Output Level Vout (dB) 30 35 40 Rev.6, Nov. 2000, page 19 of 32 HA12230NT PB-EQ Noise Level vs. Supply Voltage 150 Ain mode EQOUT Bin mode A120 or B NORM A70 or B CROM A120 or B NORM A70 or B CROM Din-Audio filter Rch Lch PB-EQ Noise Level (Vrms) 100 50 0 6 8 10 12 Supply Voltage (V) 14 16 -20 PB-EQ Channel Separation vs. Frequency (LR) Ain PBOUT Bin VCC = 12 V PB-EQ Channel Separation (dB) -40 -60 NC -80 NN -100 -120 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 20 of 32 HA12230NT -20 PB-EQ Channel Separation vs. Frequency (RL) Ain PBOUT Bin VCC = 12 V PB-EQ Channel Separation (dB) -40 -60 NC -80 NN -100 -120 10 100 1k Frequency (Hz) 10k 100k -20 VCC = 12 V PBOUT -40 PB-EQ Crosstalk (dB) PB-EQ Crosstalk vs. Frequency (AB) -60 NN, NC -80 -100 -120 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 21 of 32 HA12230NT Line Amp. Gain vs. Frequency 40 TAIPBOUT VCC = 6, 12, 16 V Vin = 30 mVrms Line Amp. Gain (dB) 30 20 10 10 100 1k Frequency (Hz) 10k 100k Line Amp. Total Harmonic Distortion vs. Supply Voltage 1.0 Line Amp. Total Harmonic Distortion T.H.D. (%) TAIPBOUT Vin = 30 mVrms 100 Hz 1 kHz 10 kHz 0.1 0.01 0.001 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 22 of 32 HA12230NT Line Amp. Total Harmonic Distortion vs. Output Level 100 Line Amp. Total Harmonic Distortion T.H.D. (%) 10 TAIPBOUT VCC = 12 V Vout = 580 mVrms = 0 dB 100 Hz 1 kHz 10 kHz 1 0.1 0.01 -25 -20 -15 -10 -5 0 5 Output Level Vout (dB) 10 15 20 Line Amp. Maximum Output Level vs. Supply Voltage Line Amp. Maximum Output Level Vomax (Vrms) 5 TAIPBOUT T.H.D. 1% 100 Hz 1 kHz 10 kHz 4 3 2 1 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 23 of 32 HA12230NT MS Amp. Gain vs. Frequency 50 TAIMAOUT Vin = 30 mVrms VCC = 6, 12, 16 V 40 MS Amp. Gain (dB) 30 6V 20 10 16V 0 10 100 1k Frequency (Hz) 10k 100k -50 -60 Line Mute Attenuation (dB) Line Mute Attenuation vs. Frequency TAIPBOUT Vin = 120 mVrms VCC = 6, 12, 16 V 6V -70 -80 16V -90 -100 -110 -120 -130 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 24 of 32 HA12230NT REC-EQ Gain vs. Frequency 50 RECinRECOUT Vin = 7.75 mVrms VCC = 12 V 40 REC-EQ Gain (dB) 30 NC 20 10 NN 0 10 100 1k Frequency (Hz) 10k 100k -20 REC-EQ Channel Separation vs. Frequency (1) RECinRECOUT Vin = 17 dB, NN LR RL REC-EQ Channel Separation (dB) -40 -60 -80 -100 -120 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 25 of 32 HA12230NT -20 REC-EQ Channel Separation vs. Frequency (2) RECinRECOUT Vin = 12 dB, NC LR RL REC-EQ Channel Separation (dB) -40 -60 -80 -100 -120 10 100 1k Frequency (Hz) 10k 100k -20 RinRECOUT Vin = 17 dB VCC = 12 V -40 REC-MUTE Attenuation (dB) REC-MUTE Attenuation vs. Frequency -60 NN -80 -100 NC -120 10 100 1k Frequency (Hz) 10k 100k Rev.6, Nov. 2000, page 26 of 32 HA12230NT REC-EQ Maximum Output Level vs. Supply Voltage (1) 4 REC-EQ Maximum Output Level Vomax (Vrms) 3 RinRECOUT, NN T.H.D. 1% 100 Hz Lch 1 kHz 10 kHz 100 Hz Rch 1 kHz 10 kHz 2 1 0 6 8 10 12 Supply Voltage (V) 14 16 REC-EQ Maximum Output Level vs. Supply Voltage (2) 4 REC-EQ Maximum Output Level Vomax (Vrms) 3 2 RinRECOUT, NC T.H.D. 1% 100 Hz Lch 1 kHz 10 kHz 100 Hz Rch 1 kHz 10 kHz 6 8 10 12 Supply Voltage (V) 14 16 1 0 Rev.6, Nov. 2000, page 27 of 32 HA12230NT REC-EQ Total Harmonic Distortion vs. Supply Voltage (1) 10 REC-EQ Total Harmonic Distortion T.H.D. (%) RECinRECOUT, NN 100 Hz 1 kHz 10 kHz 1.0 0.1 0.01 6 8 10 12 Supply Voltage (V) 14 16 REC-EQ Total Harmonic Distortion vs. Supply Voltage (2) 10 REC-EQ Total Harmonic Distortion T.H.D. (%) RECinRECOUT, NC 100 Hz 1 kHz 10 kHz 1.0 0.1 0.01 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 28 of 32 HA12230NT REC-EQ Total Harmonic Distortion vs. Output Level (1) 100 REC-EQ Total Harmonic Distortion T.H.D. (%) RECinRECOUT, NN Vout = 775 mVrms = 0 dB VCC = 12 V 100 Hz 1 kHz 10 kHz 10 1 0.1 -25 -20 -15 -10 -5 0 5 Output Level Vout (dB) 10 15 20 REC-EQ Total Harmonic Distortion vs. Output Level (2) 100 REC-EQ Total Harmonic Distortion T.H.D. (%) RECinRECOUT, NC Vout = 775 mVrms = 0 dB VCC = 12 V 100 Hz 1 kHz 10 kHz 10 1 0.1 -25 -20 -15 -10 -5 0 5 Output Level Vout (dB) 10 15 20 Rev.6, Nov. 2000, page 29 of 32 HA12230NT REC-EQ Signal to Noise Ratio vs. Supply Voltage 70 REC-EQ Signal to Noise Ratio S/N (dB) 65 60 55 Lch Rch RECOUT NN mode NC mode NN mode NC mode 50 6 8 10 12 Supply Voltage (V) 14 16 Rev.6, Nov. 2000, page 30 of 32 HA12230NT Package Dimensions Unit: mm 27.10 28.10 Max 30 16 10.0 Max 1 1.5 Max 1.0 15 5.06 Max 8.8 10.16 0.51 Min 2.54 Min 1.78 0.25 0.25 - 0.05 1 - 13 Hitachi Code JEDEC EIAJ Mass(reference value) + 0.10 0.48 0.10 DP-30S -- Conforms 1.98 g Rev.6, Nov. 2000, page 31 of 32 HA12230NT Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http://semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia : http://sicapac.hitachi-asia.com Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 2.0 Rev.6, Nov. 2000, page 32 of 32 |
Price & Availability of HA12230NT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |