 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/CEL/SIC864520/B/21/04/2004 page 1 /2 F/GB Nouveau Relais Statique compact Serie au pas de 22,5mm SIC864520 8-30VDC control 32A/400VAC output New Solid State Relay compact size pitch 22,5mm * Sortie AC synchrone : 24 - 520 VAC- 40A. Connectique 32A * VDR protection * Protection IP20. * 24-520VAC -40A Zero-Cross AC Output ; 32A terminals * VDR protection * IP20 Protection . Connections . control power Dimensions / Size 37 L fils/wires 1 x(0,14-->2,5mm2) L couple serrage/torques tournevis/Screwdriver screwdriver 0,6N.m M3 0,6N.m M3 Application typique/Typical application L = 6mm 1 x 6mm2) 1 x 4mm2) CHARGE/ LOAD protection reseau line protection L = 9mm 1 L1 2 T1 + VDR 18 A monter sur dissipateur. Must be used with heatsink (see fig 2) 80 4,5 22,4 A2 A1 Caracteristiques de commande (a 20C) / Control characteristics (at 20C) Parametre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Resistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage Symbol Uc Ic Uc off Rc Urv Min 8 5 1 DC Nom Max 30 30 Unit V mA V V VRMS VRMS V 1000 30 Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Isolement entree-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignee Isolement/Rated impulse voltage Uimp 4000 Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Ic (mA) + 70 a 75 -Entree+ control fig. 1 :Caracteristique d'entree / Control characteristic 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 fig1 : Caracteristique d'entree / Control characteristic 8 10 12 14 16 18 20 22 24 26 28 30 Uc (V) Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/CEL/SIC864520/B/21/04/2004 page 2 / 2 F/GB Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) Conformite / Conformity Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 60 55 50 45 1,6K/W 40 35 2,2K/W 30 25 20 6K/W 15 10 5 0 0 24 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 RMS load current : I (A) 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient temperature : Tamb (C) 50% on state 85 90 95 100 Full on state 0,95K/W 0,75K/W 1,1K/W 0,55K/W T case max (C) 65 70 75 80 Symbol Typ. Ue 400 Uemin-max 24-520 (*) Up 1200 (*) Usync 50 Ie nom Ua 8 ( see Fig. 2 ) Ie AC-51 32 (**) Ie AC-51 12 tp=10ms (Fig. 3) Itsm 350 @ Ie nom Vd 1,3 @Ue, 50Hz Ilk <1 Ie min 5 Uc nom DC ,f=50Hz ton max 10 Uc nom DC ,f=50Hz toff max 10 f 0,1-440 dv/dt 500 di/dt 50 I2t 610 EN60947-4-x Conditions Unit V rms V rms V V V A rms A rms A V mA mA ms ms Hz V/s A/s A2s * VDR ** limite des connexions. Terminals limits : 32A Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 40A(Itsm=350A) / Surge current : Itsm (Apeak) = f(t) for 40A models with Itsm =350A 400 Itsm (Apeak) 300 200 100 0 Surcharge de courant repetitive avec tension reappliquee / Repetive surge current with voltage reapplied. Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 0,01 0,1 t(s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SIC864520
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |