Part Number Hot Search : 
1002D KAS40 2400A 32300 LM79L10 ST49LF BM53P 32201
Product Description
Full Text Search
 

To Download XFP-DWIR04P Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Datasheet
10 Gbps DWDM Multirate XFP Transceivers
9.95 Gbps - 11.1 Gbps
Features
Models for all C-band wavelengths on the 100GHz DWDM ITU grid Cold start up wavelength compliance (stable transmit frequency) 120 km with EDC, 80 km, and 40 km reach models XFI high-speed electrical interface 9.95 Gbps, 10.31 Gbps, 10.52 Gbps, 10.7 Gbps, and 11.1 Gbps support Digital Diagnostics Cooled EML with isolator APD receiver (120 km and 80 km) and PIN receiver (40 km) Power consumption under 3.5 watts -5 to 70 C operating temperature range XFP MSA Rev 4.5 compliance RoHS and China RoHS compliance Class 1 Laser, 21CFR 1040.10/1040.11 compliance EN 60825-1/A1:2002 compliance USA and Canada UL listing External reference clock synchronization Absolute Maximum Rating Parameter Maximum Supply Voltage (3.3V) Maximum Supply Voltage (5.0V) Maximum Supply Voltage (1.8V) Operating Temperature (case) Storage Temperature Symbol Vcc3 Vcc5 Vcc2 BR Tst Min. -0.3 -0.3 -0.3 9.95 -40 Typical Max. 3.6 5.5 2 11.1 85 Unit V V V Gb/s C
General Operations Parameter Supply Voltage (1.8V) Supply Voltage (3.3V) Supply Voltage (5V) Total Current on Any Pin Inrush Current (1.8V) Inrush Current (3.3V) Inrush Current (5V) Module Current Ramp Rate Power on 1.8V Rail Power on 3.3V Rail Power on 5V Rail Module Total Power Consumption Power Consumption-P_Down Mode Power Supply Noise Rejection Symbol Vcc2 Vcc3 Vcc5 Icc Iinrush2 Iinrush3 Iinrush5 P2rail P3rail P5rail Pt Pp_d PSNR Min 1.71 3.14 4.75 Typical 1.8 3.3 5 Max 1.89 3.47 5.25 500 1 0.75 0.5 100 1.8 2.5 2.5 3.5 Unit V V V mA A A A mA/S W W W W -
Compliant to Section 2.7.2 of XFP MSA
1
Datasheet
Transmitter Specifications (Electical) Parameter Input Differential Impedence Differential Data Input Swing TxDisable_Disable TxDisable_Enable Symbol Rin Vin,p-p Vd Ven Min 120 2 GND Typical 100 Max 820 Vcc3 GND+0.8 Unit mV V V
Transmitter Specifications (Optical) Parameter Output Power:
XFP-DWLR12P-xx XFP-DWLR08P-xx XFP-DWIR04P-xx
Symbol PO PO PO Poff ER ER ER
Min -2 0 -1 8.2 9 8.2
Typical 0 2 0.5 -
Max 2 4 2 -30 -
Unit dBm dBm dBm dBm dB dB dB
Average Launch Power Tx_Off Extinction Ratio: XFP-DWLR12P-xx
XFP-DWLR08P-xx XFP-DWIR04P-xx
Eye Mask Side Mode Suppression Ratio Center Wavelength Channel Spacing Spectral Width Jitter Generation (peak-to-peak) Jitter Generation (RMS) Dispersion Penalty at 2200 ps/nma Relative Intensity Noise Reflectance Tolerance f
ITU-T G.691, Telecordia GR-253-CORE, IEEE802.3 10GBASE-ZR Compliant SMSR 30 ITU Grid 100 1 0.1 0.01 2 -130 -27 dB nm GHz nm UI UI dB dB/Hz dB
20 Jgen(pk-pk) Jgen(RMS) DP RIN ref T
Receiver Specifications (Electrical) Parameter Reference Differential Output Impedence Differential Data Output Swing Output Rise Time, 20-80% Output Fall Time, 20-80% LOS Fault LOS Normal Symbol Zd Vout,p-p tr tf VLOS_fault VLOS_normal Min 340 24 24 host_Vcc3 - 0.5 GND Typical 100 Max 850 host_Vcc3 GND + 0.4 Unit mV ps ps V V
2
Datasheet
Receiver Specifications (Optical) Parameter Sensitivity (9.95 Gb/s):
XFP-DWLR12P-xxa XFP-DWLR08P-xxb XFP-DWIR04P-xxb
Symbol Rxsens995 Rxsens995 Rxsens995 Rxsens1070 Rxsens1070 Rxsens1070 Rx OL Rx OL Rx OL ORL
XFP-DWLR12P-xx XFP-DWLR08P-xx XFP-DWIR04P-xx
Min -7 -7 0 1528 -34 -34 -24 0.5
Typical -
Max -24 -24 -16 -23 -23 -15 1564 -27 -24 -24 -16 -
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm nm dB dBm dBm dBm dBm dBm dBm dB
Sensitivity (10.7 Gb/s):
XFP-DWLR12P-xxa XFP-DWLR08P-xxb XFP-DWIR04P-xxb
Saturation:
XFP-DWLR12P-xxa XFP-DWLR08P-xxb XFP-DWIR04P-xxb
Wavelengthc Optical Return Loss LOS Assert:
-
LOS De-assert:
XFP-DWLR12P-xx XFP-DWLR08P-xx XFP-DWIR04P-xx
LOS Hysteresis
a) At 8.2dB ER, 1e-12 BER, 231-1 PRBS, back to back b) At 9dB ER, 1e-12 BER, 231-1 PRBS, back to back c) Operational over 1200 - 1625 nm range
Reference Clock Parameter Clock Differential Input Impedance Differential Input Clock Amplitude (p-p) Reference Clock Duty Cycle Reference Clock Rise/Fall Time (20%-80%) Reference Clock Frequency Symbol Zd Tr/Tf f0 Min 80 640 40 200 Typical 100 Baud/64 Max 120 1600 60 1250 Unit mV % ps MHz
3
Datasheet
Ordering Information Dispersion Spec. (ps/nm) Dispersion Penalty (dB) Wavelength (nm) Description
Data Rate
Bail Latch Color
XFP-DWLR12P-xx*
10 Gbps DWDM Multirate XFP Tranceiver with Digital Diagnostics 10 Gbps DWDM Multirate XFP Tranceiver with Digital Diagnostics 10 Gbps DWDM Multirate XFP Tranceiver with Digital Diagnostics
9.95 - 11.1 Gbps 9.95 - 11.1 Gbps 9.95 - 11.1 Gbps
ITU Grid
2
2200
White
120**
XFP-DWLR08P-xx*
ITU Grid
2
1600
White
XFP-DWIR04P-xx*
ITU Grid
2
800
White
* See Wavelength Guide below for "xx" values ** EDFA is required for full distance reach c Wavelength Guide ITU Channel (xx) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Frequency (THz) 191.7 191.8 191.9 192.0 192.1 192.2 192.3 192.4 192.5 192.6 192.7 192.8 192.9 193.0 193.1 193.2 193.3 193.4 193.5 193.6 193.7 193.8 193.9 Wavelength (nm) 1563.863 1563.047 1562.233 1561.419 1560.606 1559.794 1558.983 1558.173 1557.363 1556.555 1555.747 1554.940 1554.134 1553.329 1552.524 1551.721 1550.918 1550.116 1549.315 1548.515 1547.715 1546.917 1546.119 ITU Channel (xx) 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 Frequency (THz) 194.0 194.1 194.2 194.3 194.4 194.5 194.6 194.7 194.8 194.9 195.0 195.1 195.2 195.3 195.4 195.5 195.6 195.7 195.8 195.9 196.0 196.1 Wavelength (nm) 1545.322 1544.526 1543.730 1542.936 1542.142 1541.349 1540.557 1539.766 1538.976 1538.186 1537.397 1536.609 1535.822 1535.036 1534.250 1533.465 1532.681 1531.898 1531.116 1530.334 1529.553 1528.773
4
Distance (km)
80 40
Model
Datasheet
Pin Out Definition Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CML-O CML-O LVTTL-I/O LVTTL-I/O LVTTL-O LVTTL-O LVTTL-O LVTTL-I LVTTL-O LVTTL-I Logic Symbol GND VEE5 Mod_DeSel Interrupt TX_DIS Vcc5 GND Vcc3 Vcc3 SCL SDA Mod_Abs Mod_NR RX_LOS GND GND RDRD+ GND Vcc2 Name/Description Module Ground Optional -5.2V power supply (not used) Module De-Select; when held low allows module to respond to 2-wire interface interface Interrupt; indicates presence of an important condition which can be read over the 2-wire serial interface Transmitter Disable; turns off transmitter laser output +5 V Power Supply Module Ground +3.3 V Power Supply +3.3 V Power Supply 2-Wire Serial Interface Clock 2-Wire Serial Interface Data Line Indicates module is not present. Grounded in the module Module Not Ready; indicating module operational fault Receiver Loss of Signal Indicator Module Ground Module Ground Receiver Inverted Data Output Receiver Non-Inverted Data Output Module Ground +1.8 V Power Supply Power Down; When high, requires the module to limit power consumption to 1.5 W or below. 2-wire serial interface must be functional in the low power mode. Reset; the falling edge initiates a complete rest of the module including the 2-wire serial interface, equivalent to a power cycle. +1.8 V Power Supply Module Ground Reference Clock Non-Inverted Input, AC coupled on the host board Reference Clock Inverted Input, AC coupled on the host board Module Ground Module Ground Transmitter Inverted Data Input Transmitter Non-Inverted Data Input Module Ground 1 1 1 1 1 2 2 2 2 2 1 1 1 2 Note 1
21
LVTTL-I
P_Down/RST
22 23 24 25 26 27 28 29 30 CML-I CML-I PECL-I PECL-I
Vcc2 GND RefCLK+ RefCLKGND GND TDTD+ GND
Note: 1. Module ground pins GND are isolated from the module case and chassis ground within the module. 2. Shall be pulled up with 4.7k-10kohms to a voltage between 3.15 V and 3.45 V on the host board.
5
Datasheet
Mechanical Drawing
[6.91] .272
[16.15] .636
[69.09] 2.720 [11.47] .451 [6.02] .237 [6.25] .246 [12.19] .480 [8.95] [8.44] .352 .332 [77.98] 3.070
[3.80] .150 [18.29] .720
-
ISO VIEW
1. MRV'S XFP TRANSCEIVERS ARE COMPLIANT WITH THE DIMENSIONS DEFINED BY XFP MULTISOURCING AGREEMENT (MSA). NOTES: UNLESS OTHERWISE SPECIFIED
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: High power spectral laser emission is deemed dangerous to human eyes. Always avoid direct and indirect eye exposuers.
MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at sales@mrv.com or call us for assistance.
MRV Los Angeles 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-OP-XFPDWMR-041008
3020005-001 Rev. A2
Copyright (c)2008 MRV Communications, Inc. All Rights Reserved.


▲Up To Search▲   

 
Price & Availability of XFP-DWIR04P

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X