View PFC-D1206-01-1003-3301-AA_4460186.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TaNFilm(R) Precision Chip Voltage Divider
PFC Divider Series
* * * * * Popular 1206 Chip Size 5 to 150K per resistor Tested for COTS applications Superior alternative to matched sets Standard Sn/Pb and 100% tin (Pb-free) terminations available
IRC now has a perfect voltage divider solution. Designed around the 1206 sized chip, the PFC Divider series provides a single package solution that is compatible with your automatic placement equipment. The ratio tolerance can be specified down to 0.05%* which is much tighter than the 0.2% achievable from two individual 0.1% chip resistors. Similarly, the TCR tracking of 5 ppm/C is far superior to the tracking obtainable from two individual 25 ppm/C chip resistors. IRC's TaNFilm(R) Tantalum Nitride film system provides superior environmental performance while insuring long term life stability. This dual element, monolithic package offers the advantages of reducing component quantities and board space while increasing quality and reliability. For a precision voltage divider network in a small package solution, specify IRC TaNFilm(R) PFC Dividers.
Electrical Data
Characteristic Resistance Range Power Rating Absolute TCR Tracking TCR Maximum Voltage Rating Operating Temperature Range Noise Termination Each Resistor 10 - 150K 125mW to 25ppm/C* to 5ppm/C* 100 volts -65C to +150C Less than -25 db 60/40 Sn/Pb or 100% tin (Pb-free) Total Resistance 200K 250mW
*Tighter Tolerance and Higher Resistance value available. Contact factory for more information
General Note
IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print.
(c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
A subsidiary of TT electronics plc PFC Series Issue January 2009 Sheet 1 of 3
TaNFilm(R) Precision Chip Voltage Divider
Physical Data
TOP SIDE BOTTOM Recommended Solder Pad
0.0895"
0.063" .005"
0.024" 0.004"
0.058" .005"
0.0725"
R2
0.015" 0.005"
0.027" 0.003"
0.180" 0.126" 0.006"
0.035"
R1
0.030" min
0.0225"
0.050" 0.015" 0.005"
0.010" 0.004"
Dimensions are in inches
0.058"
0.0315"
Environmental Data
Test Thermal Shock Short Time Overload High Temperature Exposure Resistance to Bond Exposure Moisture Resistance Method MIL-STD-202 -65 to +125C, 5 Cycles MIL-PRF-55342 MIL-PRF-55342 MIL-PRF-55342 MIL-STD-202 10 Cycles, 240 hours 10% Rated Power MIL-PRF-55342 70C, 1000 hours MIL-PRF-55342 R/R .02% .02% .03% .01% .03% .03% .01% Ratio .005% .005% .01% .01% .02% .01% .005%
Load Life (Rated Power) Low Temperature Operation
(c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
PFC Series Issue January 2009 Sheet 2 of 3
TaNFilm(R) Precision Chip Voltage Divider
Manufacturing Capability
Range of Lowest Resistor 5 - 24 25 - 50 51 - 75 76 - 999 1.0K - 100K Available Absolute Tolerances F FDB FDB FDB FDBA Available Ratio Tolerances FD FDB FDB FDBA FDBAQT Best Absolute TCR 100ppm/C 50ppm/C 25ppm/C 25ppm/C 25ppm/C Best Tracking TCR 50ppm/C 20ppm/C 10ppm/C 5ppm/C 5ppm/C
Packaging Data
PACKAGING ON 8mm TAPE
USER DIRECTION OF FEED
Ordering Data
Prefix Model PFC D1206 - 03 - 1003 - 3301 - F B
D1206 - Divider network w/ standard Sn/Pb termination D1206LF - Divider network w/ 100% tin, Pb-free termination
TCR Code*
01 = 100ppm/C; 02 = 50ppm/C; 03 = 25ppm/C
R1 Resistance Code
Standard 4-Digit resistance code. Ex: 1002 = 10K; 50R0 = 50
R2 Resistance Code Absolute Tolerance* Ratio Tolerance*
Standard 4-Digit resistance code F = 1%; D = 0.5%; B = 0.1%; A = 0.05%
F = 1%; D = 0.5%; B = 0.1%; A = 0.05%, Q = 0.02%, T = 0.01%
* For tighter tolerance and tighter TCR requirements, please refer to IRC's Ultra Precision datasheet. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below.
(c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
PFC Series Issue January 2009 Sheet 3 of 3

▲Up To Search▲

Price & Availability of PFC-D1206-01-1003-3301-AA

	To Download PFC-D1206-01-1003-3301-AA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .