|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Oscilent Corporation IF SAW Filter | 813-SL95.0M-15 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL95.0M-15 TYPE : 13.3 x 6.5 SMD IF SAW Filter Jan. 01, 2007 IF SAW Filter PART NUMBER : 813-SL95.0M-15 OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Temperature Coefficient Amplitude Ripple 1.0dB Bandwidth 3.0dB Bandwidth 5.0dB Bandwidth 30.0dB Bandwidth 40.0dB Bandwidth Relative Attenuation: Group Delay Variation Absolute Delay at Fo Ambient Temperature Minimum 14.2 40 Typical 95.0 12.5 50 50 -94 0.50 14.0 14.5 14.9 16.9 17.2 48 50 1.15 25 Maximum 15.0 1.0 15.2 17.5 18.5 120 Units MHz dB ohm ohm ppm/C dBp-p MHz MHz MHz MHz MHz dB ns us C *With Matching Network (Ref. Testing Environment Circuit as Shown Below). Those impedances could be modified with different impedance values and/or structures, if necessary PACKAGE OUTLINE (mm) PIN DESCRIPTIONS: IN - 11, OUT - 5, GROUND - 1,2,3,4,6,7,8,9,10,12 TEST CIRCUIT Oscilent Corporation IF SAW Filter | 813-SL95.0M-15 Page 2 of 2 TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm INPUT: OUTPUT: L1: 120 nH; C1: 51 pF L2: 33 nH FREQUENCY RESPONSE Part No.: 813-SL95.0M-15 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL950M-15 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |