![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TX-191 Temperature Compensated Crystal Oscillator TX-191 Description Vectron International has introduced a series of surface mount, Temperature Compensated Crystal Oscillators (TCXO) available in The TX-191 surface mount TCXO's can be mounted using the standard convection re ow process. The units can meet the 0.37 holdover requirement of GR-1244-CORE table 3-1 from 0 C to +70 C temperature range and operate from 3.3V or 5.0V supply. Features * * * * * Stratum 3 Compliant Tight Stability Low Aging Frequency Range: 10 MHZ to 622 MHZ Previous Model: MC1200, TC-210 * * * * Applications SONET/SDH Synthesizers Optimized for Semtech SONET / SDH Synchronization Sets Performance Speci cations Parameter vs. operating temperature range (referenced to +25C) Min -0.8 -0.28 -0.8 -0.28 -0.28 -1.5 -0.1 -0.1 -2.5 -4.6 Typ Max +0.8 +0.28 +0.8 +0.28 +0.28 +1.5 +0.1 +0.1 +2.5 +4.6 Units ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm Condition -40... +85C -30... +85C -20... +70C -20... +70C 0... +50C at time of shipment, No EFC Vs 5% Load 10% *Stratum 3 per GR-1244-CORE: <4.6 ppm for all causes and 15 years aging, Holdover: <0.37 ppm over 24 hours Frequency Stabilities1 Initial Tolerance (w\ xed frequency) vs. supply voltage change vs. load change vs. aging / 15 years Overall Tolerance Supply Voltage (Vs) Supply voltage (Standard) Supply voltage (Option) 3.135 4.75 3.3 5.0 3.465 5.25 VDC VDC Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Speci cations Parameter Current consumption (depends on frequency and output type) Min Typ Max 15 15 70 Units mA mA mA Condition steady state @ +25C & 3.3VDC steady state @ +25C & 5.0VDC PECL RF Output Signal Load Rise/Fall Time Duty cycle Signal Load Output Power (Standard) Harmonics Spurious Signal (custom number required) Load Signal Level (Vol) Signal Level (Voh) Rise & Fall Times (measured @ 20%) Duty cycle 45 Vs -1.025 1000 600 55 0.0 40 13.5 15 HCMOS 16.5 5 60 Sinewave 50 +3.0 +6.0 -30 -30 PECL 50 Vs -1.62 ohm V V ps ps % Into Vcc-2V or there in equivalent -40...+85C operating temp -40...+85C operating temp <100 MHz >= 100 MHz @ 50 % Vcc ohm dBm dBc dBc If applicable pF ns % 10% - 90% @ (Voh-Vol)/2 3.0 to 100 MHz Frequency Tuning (EFC) Tuning Range Tuning Range Linearity Tuning Slope Control Voltage Range (nominal frequency to occur at Typ 0.5V) Freq. control input impedance 0.3 0.5 10 1.65 2.5 8.0 Fixed; No adjust 12.0 20.0 20 Positive 3.0 4.5 VDC VDC kohm with Vs=3.3VDC with Vs=5.0VDC ppm % Additional Parameters1 Phase Noise3 (Stratum 3 TCXO @12.8 MHz) -115 -130 -140 1 9.0 dBc/Hz dBc/Hz dBc/Hz ppb g Handling & processing note 100 Hz 1 kHz 10 kHz Tau= 1 sec Allan Variance Weight Processing & Packing Supply voltage (Vs) Control Voltage Maximum output load @ CMOS Operable temperature range Storage temperature range -40 -55 Absolute Maximum Ratings 6 6 40 +85 +125 V V pF C C Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Standard Shipping Method Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P Recommended Re ow Pro le Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm (inches) Pin Connections Type C Code 0 Height "H" 6.8 Pin Length "L" NA 1 2 3 4 5 Output Supply Ground (Case) Freq. Adjust / No Connect Ground Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information TX - 191 0 - D A J - 807 Product Family TX: TCXO Package 25 x 30 mm Height 0: C6.8mm Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS C: PECL E: Sinewave 0 - 10M0000000 Frequency Tuning Option 0: No Tuning 1: Electrical Adjust (EFC) Stability Code 807: 0.8ppm 287: 0.28ppm 466: 4.6ppm Stratum3 Temperature Range E: -40C to +85C H: -30C to +85C J: -20C to +70C P: 0C to +50C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modi cation. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2/19/2009 daf Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com |
Price & Availability of TX-1910-ECH-287
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |