 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PT-10E * High sensitivity, -20 dBm Product Bulletin (Preliminary) * January 2003 * Differential-output PIN/TIA receiver * High data rate, up to 10.7 Gb/s * 1200-1650 nm wavelength range * Compact butterfly package * Dual coplanar output The PT-10E is a -20 dBm sensitivity receiver module for OC-192 / STM-64 transmission system receive applications up to 10.7 Gb/s. It couples a high responsivity (1 A/W), back-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, with an internal transimpedance gain stage of 1600 V/A. This combination produces a receiver with a 8.5 GHz bandwidth and conversion gain of 1500 V/W. The differential-output module is available with a coplanar waveguide package with single-mode fiber input. The receiver meets Telcordia GR-468 qualification standards. 1 2 Specifications Wavelength range Bandwidth (-3dB electrical) Low frequency cutoff 1 Sensitivity 2 Overload Responsivity @ 1550 nm Cinversion gain (differential) Electrical Return Loss (< 8 GHz) Optical Return Loss Power dissipation Minimum Typical Maximum Units 1200 8 8.5 25 -20 >1 1.0 1500 -10 -30 .36 -18 1650 nm GHz kHz dBm dBm A/W U dB dB W 0 0.9 1300 DC Electrical Photodiode voltage Amplifier voltage +4 -5.5 +5 -5.2 +8 -4.9 V V Mechanical Package type Operating temperature Storage temperature Output is DC coupled 10 -10 BER, PRBS 2 23-1 Surface mount coplanar 0 -40 +70 +85 C C PT-10E Product Specifications .050 TYP. 16 11 10 7 .820 1.017 1.174 1 6 .608 Single-mode fiber with 900m buffer (1 meter typical) .095 .709 .152 .911 1.721 Pin Description 1 2 3 4 5 6 7 8 VPD GND VAMP NC NC NC GND Data Out N Pin Description 9 10 11 12 13 14 15 16 Data Out P GND NC DC Out N DC Out P Decision Threshold GND NC .272 Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. Temperature and fiber restrictions are as follows: Lead soldering: 250C for no more than 10 seconds Fiber feed-through tube: 120C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. PT-10E Ordering Information Base model Option format Package options Fiber connector options PT-10E /Package/Fiber connector 16CPW FC or SC Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. PT-10E Picometrix, Inc. * PO Box 130243 Ann Arbor, MI * 48113-0243 734-998-4501 * 734-998-3474 fax www.picometrix.com (c) 2003 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10E-0103-A |
Price & Availability of PT-10E16CPW
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |