 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Wire Bondable Chip Resistors WBC Series * Discrete or tapped schematics * MIL inspection available * High resistor density IRC Advanced Film Division IRC's WBC series wire bondable chip resistors are ideally suited for the most demanding hybrid application. The WBC combines IRC's TaNSil(R) tantalum nitride thin film technology with silicon substrate processing to produce an extremely small footprint device with the proven stability, reliability and moisture performance of IRC's TaNSil(R) resistor film. Available in a wide range of tolerances and temperature coefficients to fit a variety of hybrid circuit applications. Custom resistance values, sizes and schematics are available on request from the factory. Physical Data R0202 - Discrete (0.508mm 0.025) 0.020 0.001 Electrical Data Absolute Tolerance Absolute TCR R Package Power Rating (@ 70C) Rated Operating Voltage (not to exceed P x R ) Operating Temperature Back contact Noise Substrate Material Top contact Substrate Thickness Aluminum Gold R0202 and T0303 B0202 Passivation to 0.1% to 25ppm/C 250mW 100V -55C to +150C <-30dB Oxidized Silicon (10KA SiO2 min) 0.010 0.001 (0.254mm 0.025) 10KA minimum 15KA minimum Silicon (Gold available) Gold 3KA minimum Silicon Dioxide or Silicon Nitride 0.004 min bond pad size 0.020 0.001 (0.508mm 0.025) B0202 - Discrete back contact (0.508mm 0.025) 0.020 0.001 R Top contact pad chamfered 0.004 min bond pad size 0.020 0.001 (0.508mm 0.025) T0303 - Tapped network 1/2R + 1/2R Bond Pad Metallization (0.762mm 0.025) 0.030 0.001 Backside 1/2R 1/2R 0.030 0.001 (0.762mm 0.025) 0.004 min bond pad size General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA A subsidiary of TT electronics plc WBC Series Issue April 2006 Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com Wire Bondable Chip Resistors Power Derating Data IRC Advanced Film Division TCR/Inspection Code Table Absolute TCR 300ppm/C 100ppm/C 50ppm/C 25ppm/C Commercial Code 00 01 02 03 MIL Inspection Code* 04 05 06 07 *Notes: Product supplied to Class H of MIL-PRF 38534 includes 100% visual inspection Manufacturing Capabilities Data Resistance Range Available Absolute Tolerances GJK FGJK CDFGJK CDFGJK BCDFGJK BCDFGJK BCDFGJK Available Ratio Tolerances (T0303 only) FGJ FGJ CDFGJ CDFGJ BCDFGJ BCDFGJ ABCDFGJ Best Absolute TCR Tracking TCR (T0303 only) 50ppm/C 50ppm/C 25ppm/C 10ppm/C 5ppm/C 2ppm/C 2ppm/C 10-20 21-50 51-100 101-200 201-500 501-999 1.0K-1.0M 100ppm/C 100ppm/C 100ppm/C 50ppm/C 50ppm/C 25ppm/C 25ppm/C (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA WBC Series Issue April 2006 Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com Wire Bondable Chip Resistors Environmental Data Test Method MIL-STD-202 Method 107 Test condition F MIL-STD-883 Method 1008 150C, 1000 hours -55C, 1000 hours MIL-STD-202 Method 108 70C, 1000 hours MIL-STD-202 Method 108 125C, 1000 hours Max R IRC Advanced Film Division Typical R Thermal Shock 0.1% 0.02% High Temperature Exposure 0.1% 0.05% Low Temperature Storage 0.03% 0.01% Life 0.5% 0.01% Life at Elevated Temperature 0.5% 0.05% Ordering Data Prefix Style R0202 = Discrete Element B0202 = Discrete Element with Back Contact T0303 = Tapped Network WBC - RO2O2 A S - 01 - 1002 - F B Bonding pads A = Aluminum; G = Gold Backside G = Gold; S = Silicon TCR/Inspection Code Reference TCR/Inspection Code Table Total Resistance (R) 4-Digit Resistance Code Ex: 1002 = 10K; 50R1 = 50.1 Absolute Tolerance Code K = 10%; J = 5%; G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1% Ratio Tolerance Code (T0303 Only) J = 5%; G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% Packaging Standard packaging is 2 x 2 chip tray. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA WBC Series Issue April 2006 Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com |
Price & Availability of WBC-T0303GS-01-1002-B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |