View ADL5601_4500586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

50 MHz to 4.0 GHz RF/IF Gain Block ADL5601
FEATURES
Fixed gain of 15 dB Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Integrated bias control circuit OIP3 of 43.0 dBm at 900 MHz P1dB of 19.0 dBm at 900 MHz Noise figure of 3.7 dB at 900 MHz Single 5 V power supply Low quiescent current of 83 mA Thermally efficient SOT-89 package ESD rating of 1.5 kV (Class 1C)
FUNCTIONAL BLOCK DIAGRAM
GND (2)
ADL5601
BIAS
1
RFIN
2
GND
3
RFOUT
Figure 1.
GENERAL DESCRIPTION
The ADL5601 is a broadband, 15 dB linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instrumentation equipment. The ADL5601 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4.0 GHz frequency range. The ADL5601 provides a gain of 15 dB, which is stable over frequency, temperature, and supply voltage, as well as from device to device. The device is internally matched to 50 at the input and output, making the ADL5601 very easy to implement in a wide variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. The ADL5601 is fabricated on an InGaP heterojunction bipolar transistor (HBT) process and has an ESD rating of 1.5 kV (Class 1C). The device is available in a thermally efficient SOT-89 package. The ADL5601 consumes 83 mA on a single 5 V supply and is fully specified for operation from -40C to +85C. A fully populated RoHS-compliant evaluation board is available.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2009 Analog Devices, Inc. All rights reserved.
08219-001
ADL5601 TABLE OF CONTENTS
Features .............................................................................................. 1 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Typical Scattering Parameters (S-Parameters) ......................... 5 Absolute Maximum Ratings............................................................ 7 ESD Caution .................................................................................. 7 Pin Configuration and Function Descriptions ............................. 8 Typical Performance Characteristics ............................................. 9 Basic Connections .......................................................................... 11 Soldering Information and Recommended PCB Land Pattern ........................................... 11 W-CDMA ACPR Performance .................................................... 12 Evaluation Board ............................................................................ 13 Outline Dimensions ....................................................................... 14 Ordering Guide .......................................................................... 14
REVISION HISTORY
9/09--Revision 0: Initial Version
Rev. 0 | Page 2 of 16
ADL5601 SPECIFICATIONS
VCC = 5 V and TA = 25C, unless otherwise noted. Table 1.
Parameter OVERALL FUNCTION Frequency Range FREQUENCY = 50 MHz Gain Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 140 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 350 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 700 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Test Conditions/Comments Min 50 15.6 16.3 34.0 -50.7 -78.7 3.9 15.4 0.05 0.19 0.02 18.8 34.7 -51.1 -77.3 3.8 15.2 0.02 0.20 0.02 19.1 35.8 -53.8 -82.9 3.8 14.3 50 MHz -40C TA +85C 4.75 V to 5.25 V 18.0 f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 15.2 0.01 0.21 0.02 19.0 40.7 -55.6 -77.9 3.8 16.5 Typ Max 4000 Unit MHz dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB
f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
Rev. 0 | Page 3 of 16
ADL5601
Parameter FREQUENCY = 900 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2600 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 3500 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 4000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Test Conditions/Comments Min 14.3 50 MHz -40C TA +85C 4.75 V to 5.25 V 18.0 f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm Typ 15.3 0.01 0.22 0.02 19.0 43.0 -57.6 -78.7 3.7 14.2 0.08 0.27 0.03 17.5 34.2 -41.9 -67.3 4.5 13.4 0.04 0.20 0.04 16.0 30.7 -46.4 -65.4 4.7 12.9 0.06 0.32 0.05 14.2 26.7 -41.0 -62.4 5.5 12.1 0.11 0.50 0.05 12.7 24.7 -41.0 -59.7 6.1 Max 16.5 Unit dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB dB dB dB dB dBm dBm dBc dBc dB
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm
Rev. 0 | Page 4 of 16
ADL5601
Parameter POWER INTERFACE Supply Voltage (VCC) Supply Current vs. Temperature Power Dissipation Test Conditions/Comments VCC Min 4.5 -40C TA +85C VCC = 5 V Typ 5.0 83 2.3 0.42 Max 5.5 100 Unit V mA mA W
TYPICAL SCATTERING PARAMETERS (S-PARAMETERS)
VCC = 5 V, TA = 25C, and the effects of the evaluation board have been deembedded up to the pins of the device. Table 2.
Frequency (MHz) 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 S11 Magnitude (dB) -20.65 -25.05 -25.57 -24.93 -24.24 -23.29 -22.53 -22.07 -21.78 -21.51 -21.57 -21.78 -22.13 -22.68 -23.43 -24.35 -25.29 -25.88 -25.90 -25.31 -24.16 -23.38 -22.70 -22.10 -21.81 -21.78 -21.96 -22.31 -22.92 -23.53 -24.04 -24.50 -24.13 -23.01 -21.46 -19.67 -17.73 -15.95 -14.26 -12.72 -11.36 Angle () -144.57 +175.09 +149.73 +130.36 +114.36 +101.24 +88.38 +76.45 +66.13 +55.91 +46.37 +38.11 +30.61 +23.62 +18.47 +16.37 +16.28 +20.10 +25.78 +29.70 +29.42 +25.45 +20.88 +13.43 +4.90 -4.74 -15.31 -27.46 -40.13 -55.61 -74.40 -95.46 -118.14 -140.97 -161.36 -178.55 +167.17 +154.24 +141.96 +130.33 +119.00 S21 Magnitude (dB) +15.59 +15.34 +15.27 +15.20 +15.14 +15.07 +15.02 +14.97 +14.94 +14.92 +14.90 +14.89 +14.89 +14.88 +14.89 +14.89 +14.89 +14.88 +14.87 +14.87 +14.86 +14.83 +14.81 +14.80 +14.78 +14.75 +14.72 +14.68 +14.64 +14.60 +14.56 +14.49 +14.43 +14.37 +14.27 +14.18 +14.07 +13.92 +13.77 +13.60 +13.39 Angle () +161.69 +149.77 +136.48 +122.75 +108.91 +95.06 +81.26 +67.39 +53.57 +39.81 +25.97 +12.17 -1.54 -15.54 -29.41 -43.49 -57.51 -71.67 -85.39 -99.48 -113.64 -127.83 -141.81 -155.93 -170.15 +175.70 +161.57 +147.40 +133.17 +118.79 +104.52 +90.23 +75.97 +61.50 +47.04 +32.52 +18.07 +3.63 -10.89 -25.40 -39.85 S12 Magnitude (dB) -19.76 -19.85 -19.89 -19.92 -19.96 -19.99 -20.03 -20.05 -20.07 -20.08 -20.09 -20.10 -20.10 -20.11 -20.11 -20.11 -20.12 -20.13 -20.14 -20.16 -20.18 -20.22 -20.25 -20.27 -20.31 -20.35 -20.40 -20.44 -20.50 -20.56 -20.62 -20.70 -20.79 -20.89 -21.00 -21.12 -21.26 -21.42 -21.60 -21.81 -22.05 Angle () -7.97 -24.47 -38.84 -52.66 -66.22 -79.64 -92.91 -106.12 -119.35 -132.53 -145.77 -159.04 -172.37 +174.38 +161.06 +147.71 +134.31 +120.86 +107.34 +93.84 +80.32 +66.77 +53.39 +39.79 +26.19 +12.56 -1.10 -14.74 -28.45 -42.17 -55.96 -69.82 -83.66 -97.51 -111.39 -125.37 -139.35 -153.36 -167.35 +178.67 +164.79 S22 Magnitude (dB) -16.61 -16.06 -15.85 -15.63 -15.49 -15.40 -15.35 -15.38 -15.48 -15.68 -16.07 -16.65 -17.41 -18.36 -19.65 -21.34 -23.41 -25.86 -28.12 -28.73 -27.11 -25.16 -23.33 -22.27 -21.38 -20.75 -20.35 -20.06 -19.80 -19.60 -19.29 -18.83 -18.22 -17.57 -16.78 -15.91 -14.91 -13.88 -12.82 -11.79 -10.77 Angle () -168.75 +164.97 +145.84 +128.22 +112.53 +98.52 +84.79 +71.26 +58.84 +46.57 +34.25 +22.42 +10.91 -0.29 -10.39 -18.60 -25.16 -26.32 -18.10 -1.68 +8.91 +5.98 +1.75 -8.80 -21.30 -35.07 -50.07 -66.34 -83.25 -100.18 -117.80 -135.14 -150.53 -164.65 -177.64 +170.73 +160.24 +150.20 +140.45 +130.63 +120.32
Rev. 0 | Page 5 of 16
ADL5601
Frequency (MHz) 2100 2150 2200 2250 2300 2350 2400 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 S11 Magnitude (dB) -10.11 -9.04 -8.12 -7.33 -6.66 -6.11 -5.65 -5.28 -5.00 -4.78 -4.64 -4.54 -4.50 -4.52 -4.60 -4.72 -4.92 -5.18 -5.52 -5.95 -6.50 -7.17 -7.96 -8.95 -10.11 -11.43 -12.93 -14.51 -15.96 -16.86 -16.83 -15.98 -14.75 -13.43 -12.23 -11.21 -10.32 -9.59 -8.99 Angle () +107.84 +96.61 +85.63 +74.68 +63.86 +53.33 +42.82 +32.51 +22.51 +12.49 +2.62 -7.06 -16.80 -26.55 -36.24 -46.09 -56.14 -66.18 -76.58 -87.31 -98.20 -109.56 -121.53 -134.08 -147.58 -162.30 -178.72 +161.78 +138.82 +111.84 +83.89 +58.24 +36.92 +18.94 +3.37 -10.83 -24.29 -37.18 -49.64 S21 Magnitude (dB) +13.16 +12.90 +12.63 +12.34 +12.04 +11.75 +11.46 +11.18 +10.94 +10.73 +10.56 +10.43 +10.35 +10.31 +10.32 +10.37 +10.47 +10.60 +10.76 +10.96 +11.16 +11.37 +11.59 +11.77 +11.94 +12.09 +12.18 +12.24 +12.26 +12.24 +12.17 +12.06 +11.92 +11.76 +11.54 +11.31 +11.05 +10.78 +10.49 Angle () -54.15 -68.23 -82.16 -95.90 -109.35 -122.46 -135.36 -147.97 -160.34 -172.61 +175.37 +163.51 +151.65 +139.80 +127.87 +115.83 +103.58 +91.16 +78.44 +65.65 +52.38 +38.77 +24.80 +10.48 -4.10 -18.93 -34.00 -49.17 -64.42 -79.75 -95.04 -110.33 -125.55 -140.74 -155.80 -170.64 +174.74 +160.27 +146.04 S12 Magnitude (dB) -22.31 -22.60 -22.91 -23.24 -23.59 -23.92 -24.25 -24.57 -24.86 -25.12 -25.33 -25.52 -25.66 -25.74 -25.78 -25.79 -25.75 -25.67 -25.57 -25.45 -25.30 -25.16 -25.03 -24.91 -24.71 -24.64 -24.61 -24.63 -24.69 -24.80 -24.97 -25.15 -25.39 -25.66 -25.97 -26.33 -26.71 -27.07 -27.43 Angle () +150.95 +137.28 +123.82 +110.57 +97.61 +84.90 +72.46 +60.24 +48.34 +36.64 +25.08 +13.55 +2.20 -9.14 -20.59 -32.13 -43.77 -55.71 -67.81 -80.30 -93.05 -106.14 -119.49 -133.23 -148.47 -162.78 -177.32 +168.07 +153.27 +138.48 +123.67 +108.97 +94.34 +79.90 +65.42 +51.35 +37.49 +23.89 +10.62 S22 Magnitude (dB) -9.78 -8.88 -8.12 -7.45 -6.85 -6.37 -6.00 -5.68 -5.44 -5.29 -5.19 -5.13 -5.13 -5.19 -5.27 -5.40 -5.60 -5.86 -6.16 -6.57 -7.07 -7.65 -8.35 -9.19 -10.19 -11.23 -12.44 -13.64 -14.74 -15.67 -16.20 -15.98 -15.33 -14.38 -13.18 -12.03 -11.04 -10.13 -9.28 Angle () +109.99 +99.58 +88.80 +77.69 +66.77 +55.88 +44.86 +33.86 +23.12 +12.46 +1.65 -9.06 -19.67 -30.41 -41.23 -52.01 -62.93 -74.10 -85.27 -96.63 -108.36 -120.33 -132.41 -144.97 -157.59 -171.07 +174.45 +158.38 +140.90 +121.24 +98.98 +76.14 +55.10 +35.05 +17.14 +1.60 -12.99 -27.31 -40.73
Rev. 0 | Page 6 of 16
ADL5601 ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Supply Voltage, VCC Input Power (Referred to 50 ) Internal Power Dissipation (Paddle Soldered) JA (Junction to Air) JC (Junction to Paddle) Maximum Junction Temperature Lead Temperature (Soldering, 60 sec) Operating Temperature Range Storage Temperature Range Rating 6.5 V 16 dBm 600 mW 30.7C/W 5.0C/W 150C 240C -40C to +85C -65C to +150C
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ESD CAUTION
Rev. 0 | Page 7 of 16
ADL5601 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
RFIN
1
ADL5601
GND
2
TOP VIEW (Not to Scale)
(2) GND
RFOUT
3
Figure 2. Pin Configuration
Table 4. Pin Function Descriptions
Pin No. 1 2 3 (2) Mnemonic RFIN GND RFOUT Exposed Paddle Description RF Input. This pin requires a dc blocking capacitor. Ground. Connect this pin to a low impedance ground plane. RF Output and Supply Voltage. A dc bias is provided to this pin through an inductor that is connected to the external power supply. The RF path requires a dc blocking capacitor. Exposed Paddle. The exposed paddle is internally connected to GND and must be soldered to a low impedance ground plane.
Rev. 0 | Page 8 of 16
08219-002
NOTES 1. THE EXPOSED PADDLE IS INTERNALLY CONNECTED TO GND AND MUST BE SOLDERED TO A LOW IMPEDANCE GROUND PLANE.
ADL5601 TYPICAL PERFORMANCE CHARACTERISTICS
45 40
26 +25C 24
OIP3
45 40 -40C +85C 35 30 25 +25C -40C 20 15 10
08219-006
NF, GAIN, P1dB, OIP3 (dB, dBm)
35 30
22 20 18 16 14
NF
08219-020
P1dB (dBm)
25 20 15 10 5 0
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) P1dB GAIN
+85C
12 10 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 FREQUENCY (GHz)
5 4.0
Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency
Figure 6. P1dB and OIP3 vs. Frequency and Temperature
16.0 15.5 15.0 +85C 14.5 +25C -40C
44 42 40 38 36 2000MHz 350MHz 700MHz 900MHz
GAIN (dB)
14.0 13.5 13.0 12.5 12.0 11.5 0 0.4 0.8
OIP3 (dBm)
34 32 30 28 26 24 22 20 4000MHz
08219-007
140MHz 2600MHz
50MHz
3500MHz
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
08219-004
11.0 FREQUENCY (GHz)
18 -10 -8
-6
-4
-2
0
2
4
6
8
10
12
14
16
POUT PER TONE (dBm)
Figure 4. Gain vs. Frequency and Temperature
Figure 7. OIP3 vs. Output Power (POUT) and Frequency
0 -5
7.5 7.0 6.5
S-PARAMETERS (dB)
NOISE FIGURE (dB)
-10 -15 -20 S12 -25 S11 -30
6.0 +85C 5.5 5.0 4.5 4.0 3.5 3.0 -40C +25C
S22
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
08219-021
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 5. Input Return Loss (S11), Output Return Loss (S22), and Reverse Isolation (S12) vs. Frequency
Figure 8. Noise Figure vs. Frequency and Temperature
Rev. 0 | Page 9 of 16
08219-008
-35
2.5
OIP3 (dBm)
ADL5601
-30 80 70 60
-40
HARMONICS (dBc)
PERCENTAGE (%)
-50 H2 -60
50 40 30 20 10
-70 H3 -80
08219-022
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
38
39
40
41
42
43
44
45
46
47
48
49
FREQUENCY (GHz)
OIP3 (dBm)
Figure 9. Single-Tone Harmonics vs. Frequency, POUT = 0 dBm
Figure 12. OIP3 Distribution at 900 MHz, POUT = 0 dBm
90 80
60
50 70
PERCENTAGE (%)
PERCENTAGE (%)
60 50 40 30 20
40
30
20
10 10
08219-011
14.5
14.7
14.9
15.1
15.3
15.5
15.7
15.9
3.0
3.2
3.4
3.6
3.8
4.0
4.2
4.4
GAIN (dB)
NOISE FIGURE (dB)
Figure 10. Gain Distribution at 900 MHz
Figure 13. Noise Figure Distribution at 900 MHz
60
92 90 5.25V
50
SUPPLY CURRENT (mA)
88 86 84 82 80 78 76 4.75V 5V
PERCENTAGE (%)
40
30
20
10
74 0 10 20 30 40 50 60 70 80 90
08219-014
18.4
18.6
18.8
19 P1dB (dBm)
19.2
19.4
19.6
08219-012
0
72 -40 -30 -20 -10
TEMPERATURE (C)
Figure 11. P1dB Distribution at 900 MHz
Figure 14. Supply Current vs. Temperature
Rev. 0 | Page 10 of 16
08219-023
0
0
08219-010
-90
0
ADL5601 BASIC CONNECTIONS
The basic connections for operating the ADL5601 are shown in Figure 15. Recommended components are listed in Table 5. The input and output should be ac-coupled with appropriately sized capacitors (the device characterization was performed with 0.1 F capacitors). A 5 V dc bias is supplied to the amplifier through the bias inductor connected to RFOUT (Pin 3). The bias voltage should be decoupled using a 1 F capacitor, a 1.2 nF capacitor, and a 68 pF capacitor.
GND VCC
SOLDERING INFORMATION AND RECOMMENDED PCB LAND PATTERN
Figure 16 shows the recommended land pattern for the ADL5601. To minimize thermal impedance, the exposed paddle on the package underside, along with Pin 2, should be soldered to a ground plane. If multiple ground layers exist, they should be stitched together using vias. For more information on land pattern design and layout, refer to the AN-772 Application Note, A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP).
1.80mm
GND (2)
C6 1F C5 1.2nF
ADL5601
C4 68pF
C1 0.1F
RFIN
1
RFIN
2
GND
3
RFOUT
L1 470nH
C2 0.1F
08219-015
3.48mm
RFOUT
Figure 15. Basic Connections
5.56mm
0.20mm
0.86mm
0.62mm
1.27mm
1.50mm 3.00mm
Figure 16. Recommended Land Pattern
Table 5. Recommended Components for Basic Connections
Frequency 50 MHz to 4000 MHz C1 0.1 F C2 0.1 F L1 470 nH (Coilcraft 0603LS-NX or equivalent) C4 68 pF C5 1.2 nF C6 1 F
Rev. 0 | Page 11 of 16
08219-016
ADL5601 W-CDMA ACPR PERFORMANCE
ACPR AT 5MHz CARRIER OFFSET (dBc)
Figure 17 shows a plot of the adjacent channel power ratio (ACPR) vs. POUT for the ADL5601. The signal type used is a single wideband code division multiple access (W-CDMA) carrier (Test Model 1, 64) at 2140 MHz. This signal is generated by a very low ACPR source. ACPR is measured at the output by a high dynamic range spectrum analyzer that incorporates an instrument noise-correction function. The ADL5601 achieves an ACPR of -69 dBc at -5 dBm output, at which point device noise, rather than distortion, begins to dominate the power in the adjacent channels. At an output power of +5 dBm, ACPR is still very low at -56 dBc, making the device particularly suitable for power amplifier (PA) driver applications.
-40 -45 -50 -55 -60 -65 -70 -75 -20
-15
-10
-5 POUT (dBm)
0
5
10
Figure 17. ACPR vs. POUT, Single W-CDMA Carrier (Test Model 1, 64) at 2140 MHz
Rev. 0 | Page 12 of 16
08219-024
ADL5601 EVALUATION BOARD
Figure 18 shows the evaluation board layout, and Figure 19 shows the schematic for the ADL5601 evaluation board. The board is powered by a single 5 V supply. The components used on the board are listed in Table 6. Power can be applied to the board through clip-on leads (VCC and GND).
C1 0.1F
RFIN GND VCC
GND (2)
C6 1F C5 1.2nF
ADL5601
C4 68pF
1
RFIN
2
GND
3
RFOUT
L1 470nH
C2 0.1F
08219-019
RFOUT
Figure 19. Evaluation Board Schematic
Figure 18. Evaluation Board Layout (Top)
Table 6. Evaluation Board Configuration Options
Component C1, C2 L1 VCC and GND C4 C5 C6 Description AC coupling capacitors DC bias inductor Clip-on terminals for power supply Power supply decoupling capacitor Power supply decoupling capacitor Power supply decoupling capacitor Default Value 0.1 F, 0402 470 nH, 0603 (Coilcraft 0603LS-NX or equivalent) 68 pF, 0603 1.2 nF, 0603 1 F, 1206
08219-018
Rev. 0 | Page 13 of 16
ADL5601 OUTLINE DIMENSIONS
*1.75 1.55
4.25 3.94
1
(2)
2.60 2.30
3
2
1.50 TYP 3.00 TYP
1.20 0.75
4.60 4.40 0.44 0.35 *0.56 0.36
2.29 2.14 1.60 1.40
END VIEW *0.52 0.32
121808-B
*COMPLIANT TO JEDEC STANDARDS TO-243 WITH EXCEPTION TO DIMENSIONS INDICATED BY AN ASTERISK.
Figure 20. 3-Lead Small Outline Transistor Package [SOT-89] (RK-3) Dimensions shown in millimeters
ORDERING GUIDE
Model ADL5601ARKZ-R7 1 ADL5601-EVALZ1
1
Temperature Range -40C to +85C
Package Description 3-Lead SOT-89, 7" Tape and Reel Evaluation Board
Package Option RK-3
Z = RoHS Compliant Part.
Rev. 0 | Page 14 of 16
ADL5601 NOTES
Rev. 0 | Page 15 of 16
ADL5601 NOTES
(c)2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D08219-0-9/09(0)
Rev. 0 | Page 16 of 16

▲Up To Search▲

Price & Availability of ADL5601

	To Download ADL5601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .