Part Number Hot Search : 
UM232R SW25500 0SPBF BH031 RKC5SD 20NK7 MAX1187 DBF250C
Product Description
Full Text Search
 

To Download SE432L Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Description
The SE432L is a low voltage three terminal adjustable shunt regulator with a guaranteed thermal stability over applicable temperature ranges. The output voltage can be set to any value between VREF (approximately 1.24 V) to 8V with two external resistors. This device has a typical output impedance of 0.30. Active output circuitry provides a very sharp turn on characteristic, making this device excellent replacement for Zener diodes in many applications. The SE432 is characterized for operation from -40oC to 105oC, and two package options (SOT-23 and TO-92) allow the designer the opportunity to select the proper package for their applications.
Features
Low voltage operation (1.24V) Adjustable output voltage V0 =VREF to 8V Wide operating current range 60A to 100mA Low dynamic output impedance 0.30 (Typ.) Trimmed bandgap design up to + 0.5%. ESD rating is 2.5KV(Per MIL-STD-883D) 100% Lead (Pb)-Free.
Application
Linear Regulators Adjustable Supplies Switching Power Supplies Battery Operated Computers Instrumentation Computer Disk Drives
Pin Configuration
SOT-23-3, SC59-3L (Top View) TO-92 (Top View)
Marking Information
Package SOT-23-3 SC59-3L Marking Production Batch Number The last character is the batch number. Lead-Free Package Lead-free package is indicated by a dot on top of the last character. SE432L XXXX XXXX is the batch number.
Lead-free indicated XXXX. package by LF is after
S432Lx
TO-92
Revision
12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 1
Absolute Maximum Rating
Parameter Cathode Voltage Continuous Cathode Current Reference Current Operating Junction Temperature Range Storage Temperature Range Thermal Resistance Lead Temperature (Soldering) 10 seconds Symbol VKA I KA I REF TJ TSTG JA TLEAD Maximum 8 150 3 150 -45 to 150 230 (SOT-23-3) 220 (TO-92) 260 C Units V mA mA C C C/W
Electrical Characteristics
Parameter 0.5% Reference Voltage 1.0% 1.5% 2.0% 1.25V 1%(1) Deviation of Reference Voltage over Full Temperature Range Ratio of Change in Reference Voltage to the Change in Cathode Voltage Reference Current Test circuit #1 VI(DEV) VKA = VREF, IKA = 10mA, TA =-40C - 105C VREF/VKA Test circuit #2 IKA = 10mA, VKA = 8V to VREF Test circuit #2 IKA = 10mA, R1=10k, R2 = Test circuit #2 II(DEV) IKA = 10mA, R1=10k, R2 = TA = 0C - 105C IMIN Test circuit #1 VKA = VREF Test circuit #3 VKA = 8V, VREF = 0
Test circuit #1
Symbol
Test Conditions & Circuit
Min 1234
Typ 1240 1240 1240 1240 1250
Max 1246 1252 1259 1265 1263
Unit
VREF
Test circuit #1 VKA = VREF, IKA = 10mA
1228 1221 1215 1237
mV
--
68
mV
--
1.0
2.7
mV/V
IREF
--
0.15
2
A
Deviation of Reference Current over Full Temperature Range Minimum Cathode Current for Regulation Off-state Cathode Current
--
0.10
A
--
60
100
A
IOFF
--
0.04
0.8
A
Dynamic Impedance
| ZKA |
IKA = 100A - 80mA, VKA = VREF, f 1kHZ
--
0.30
1
Note 1: Upon Customer Request. Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 2
Typical Performance Characteristics
Cathode Current VS Cathode Voltage
150 Cathode Current (mA) 100 50 0 -50 -100 -150 -1.5 -1 -0.5 0 0.5 1 1.5 Cathode Voltage (V)
Revision
12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 3
Stability Boundary Condition
100 80 IKA (mA) 60 40 20 0 0.1 0.001 0.01 1 VKA=3V
CL (uF) VKA=VREF (1.24V) VKA=2V
The areas under the curves represent conditions that may cause the device to oscillate. For VKA = 2V and 3V curves, R2 and VBAT were adjusted to establish the initial VKA and IK conditions with CL = 0. VBAT and CL then were adjusted to determine the ranges of stability. As the graph suggested, SE432L is unconditional stable with IK from 0 to 100mA and with CL from 0.001uF to 1uF.
Revision 12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 4
Symbol Diagram
Cathode
Block Diagram
Cathode
Ref
+
Ref
Vref
Anode
Anode
Test Circuits
Input
V KA
Input
VKA
Input
VKA
I KA
I KA
I off
R1 Iref
Vref
R2
Vref
R1 VKA = Vref (1+ ) + Iref x R1 R2
Test Circuit 1: VKA = VREF
Test Circuit 2: VKA > VREF
Test Circuit 3: Off State Current
Application Circuit
VIN
R
VOUT
R1 Vref R2 SE432
VOUT = Vref (1+R1 )
R2
GND
Revision
12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 5
OUTLINE DRAWING SOT-23-3
C J B H
DIM
D A E
N
DIMENSIONS INCHES MM MIN MAX MIN MAX
0.110 0.047 0.083 0.035 0.070 0.018 0.015 0.0005 0.034 0.003 0.120 0.055 0.104 0.040 0.080 0.024 0.020 0.004 0.040 0.007 0.027 2.80 1.20 2.10 0.89 1.78 0.45 0.37 0.013 0.887 0.085 3.04 1.40 2.64 1.03 2.05 0.60 0.51 0.10 1.02 0.18 0.69
F
G
K
L
A B C D E F G H J K L
OUTLINE DRAWING SC59-3L
DIMENSIONS INCHE MM MIN MAX MIN MAX 0.035 0.043 0.90 1.10 0.0004 0.005 0.01 0.13 0.012 0.020 0.30 0.50 0.004 0.008 0.09 0.20 0.110 0.122 2.80 3.10 0.098 0.122 2.50 3.10 0.059 0.067 1.50 1.70
0.037REF 0.075REF 0.008 0.014 0 0.022 0.031 10 0.95REF 1.90REF 0.20 0.35 0 0.55 0.80 10
H
A
DIM
A1
N
E
B
e1
D
L
Q
SC 59-3L
L1 C
A A1 B C D H E e e1 L1 L Q
OUTLINE DRAWING TO-92
A
B D
DIM A B E F G H J K
N
DIMENSIONS INCHES MM MIN MAX MIN MAX
0.175 0.170 0.500 0.016 0.045 0.095 0.080 0.125 0.205 0.210 0.610 0.021 0.055 0.105 0.105 0.165 4.445 4.318 12.70 0.407 1.143 2.413 2.032 3.175 5.207 5.334 15.50 0.533 1.397 2.667 2.667 4.191
E
G F H K
J
Revision
12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 6
Customer Support
Seaward Electronics Incorporated - China Section B, 2nd Floor, ShangDi Scientific Office Complex, #22 XinXi Road Haidian District, Beijing 100085, China Tel: 86-10-8289-5700/01/05 Fax: 86-10-8289-5706 Seaward Electronics Corporation - Taiwan 2F, #181, Sec. 3, Minquan East Rd, Taipei, Taiwan R.O.C Tel: 886-2-2712-0307 Fax: 886-2-2712-0191 Seaward Electronics Incorporated - North America 1512 Centre Pointe Dr. Milpitas, CA95035, USA Tel: 1-408-821-6600 Last Updated - 12/4/2008
Revision
12/4/2008 Preliminary and all contents are subject to change without prior notice. (c) Seaward Electronics, Inc., 2004. * www.seawardinc.com.cn * Page 7


▲Up To Search▲   

 
Price & Availability of SE432L

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X