![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MADRCC0005 Single Driver for GaAs FET Switches and Attenuators Rev. V3 Features * * * * * * * * * * * High Speed CMOS Technology Complementary Outputs Positive Voltage Control Low Power Dissipation Plastic SOIC Package for SMT Applications Tape and Reel Packaging Available Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DR65-0109 Logic Diagram Output A VIN Output B Pin Configuration Description M/A-COM's MADRCC0005 is a Single channel driver used to translate TTL control inputs into complementary gate voltages for GaAs FET microwave switches and attenuators. High speed analog CMOS technology is utilized to achieve low power dissipation at moderate to high speeds, encompassing most microwave switching applications. Pin No. 1 2 3 4 5 6 Function VCC VIN GND GND GND Output A Output B VEE Ordering Information 7 Part Number MADRCC0005 MADRCC0005TR Package Bulk Packaging 1000 piece reel 8 Note: Reference Application Note M513 for reel size information. Guaranteed Operating Ranges Symbol VCC VEE VCC-VEE TA IOH IOL Trise, Tfall Parameter1 Positive DC Supply Voltage Negative DC Supply Voltage Positive to Negative Supply Range Operating Ambient Temperature DC Output Current - HIGH DC Output Current - LOW Maximum Input Rise or Fall Time Unit V V V C mA mA nS Min 4.5 -5.5 9.0 -40 -- -- -- Typical 5.0 -5.0 10.0 +25 -- -- -- Max 5.5 -4.5 11.0 +85 -1.0 1.0 500 1. All voltages are relative to GND * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADRCC0005 Single Driver for GaAs FET Switches and Attenuators Rev. V3 AC & DC Characteristics Over Guaranteed Operating Range Symbol VIH VIL VOH VOL IIN ICC TPHL, TPLH TTHL, TTLH Parameter Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Input Leakage Current Quiescent Supply Current Propagation Delay Output Transition Time Delay Skew, Output A to Output B Test Conditions Guaranteed HIGH Input Voltage Guaranteed LOW Input Voltage IOH = -1 mA IOL = 1 mA VIN = VCC or GND VCC = Max VEE = Max VEE = Max VEE = Min VEE = Min VIN = VCC or GND Units V V V V A A nS nS nS Min 2.0 - 0.1 -- -1.0 -- -- -- -- Typ -- -- -- -- 0 -- -- -- -- Max 0.8 VEE + 0.1 1.0 400 50 25 8 Guaranteed -40 C to + 85 C Guaranteed -40 C to + 85 C Guaranteed -40 C to + 85 C See Switching Wave Forms for the definition of the switching terms. Supplies must be by-passed with .01 F Capacitors. Absolute Maximum Ratings2,3 Switching Waveforms INPUT VIN Parameter VCC VEE LOGIC 1 Absolute Maximum - .5V to + 6.0 V - 6.0 V to - .5 V 12 V VCC + .5 V VEE - .5 V -65C to +150C TF 90% 1.3 V 10% TR VCC - VEE V IN 4 LOGIC 0 V OUT Storage Temperature TPLH OUTPUT A VOUT 50% OUTPUT B 10% 90% TPHL GND 2. 3. VEE TTLH TTHL 4. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Standard CMOS TTL interface, latch-up will occur if logic signal is applied prior to power supply. Handling Procedures Please observe the following precautions to avoid damage: Truth Table Input Outputs A VEE GND B GND VEE Static Sensitivity Silicon Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. VIN 0 1 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MADRCC0005 Single Driver for GaAs FET Switches and Attenuators Rev. V3 Lead-Free, SOIC-8 Reference Application Note M538 for lead-free solder reflow recommendations. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.4155721 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MADRCC0005TR
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |