|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
1-1-1 Linear Regulator ICs SI-3000KM Series Surface Mount, Low Current Consumption, Low Dropout Voltage Linear Regulator ICs Features * Compact surface mount package (TO252-5) * Output current: 1.0 A * Low dropout voltage: VDIF 0.6 V (at IO = 1.0 A) * Low current consumption: Iq 350 A (600 A for SI-3010KM/SI-3050KM/SI3090KM/SI-3120KM) * Low circuit current at output OFF: Iq (OFF) 1 A * Built-in overcurrent and thermal protection circuits * Output ON/OFF control function * Compatible with low ESR capacitors (SI3012KM/SI-3025KM/SI-3033KM) Parameter DC Input Voltage Output Control Terminal Voltage DC Output Current Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction to Ambient Air) Thermal Resistance (Junction to case) Symbol VIN Vc IO PD*2 Tj Tstg SI-3012KM/ 3025KM/3033KM 17 VIN 1.0 1 -30 to +125 -30 to +125 95 6 Absolute Maximum Ratings Ratings SI-3010KM/3050KM/ 3090KM/3120KM 35*1 (Ta=25C) Unit V V A W C C C/W C/W j-a*2 j-c *1: A built-in input-overvoltage-protection circuit shuts down the output voltage at the Input Overvoltage Shutdown Voltage of the electrical characteristics. *2: When mounted on glass-epoxy board of 900mm2 (copper laminate area 4.3%). Applications * Secondary stabilized power supply (local power supply) Recommended Operating Conditions Ratings Parameter Input Voltage Range Output Current Range Operating Ambient Temperature Operating Junction Temperature Symbol VIN IO Top Tj SI-3012KM 2.4*2 to 6.0*1 SI-3025KM 2.4*2 to 5*1 SI-3033KM *2 SI-3010KM 2.4*2 to 27*1 0 to 1.0 -30 to +85 -20 to +100 SI-3050KM 2.4*2 to 17*1 SI-3090KM *2 SI-3120KM *2 Unit V A C C to 6*1 to 20*1 to 25*1 *1: VIN (max) and IO (max) are restricted according to operating conditions due to the relation PD = (VIN-VO) x IO. Please calculate these values referring to the Copper Laminate Area vs. Power Dissipation data as shown hereinafter. *2: Refer to the Dropout Voltage parameter. Electrical Characteristics 1 (Low VO type compatible with low ESR output capacitor) Ratings Parameter Input Voltage Output Voltage (Reference voltage VADJ for SI-3012KM) Line Regulation Load Regulation Symbol min. VIN VO (VADJ) Conditions VOLINE Conditions VOLOAD Conditions VDIF Dropout Voltage Conditions Conditions Quiescent Circuit Current Circuit Current at Output OFF Temperature Coefficient of Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2 Control Voltage (Output ON) Control Voltage (Output OFF) VC Control Current Terminal (Output ON) Control Current (Output OFF) Iq Conditions Iq (OFF) Conditions VO/Ta Conditions RREJ Conditions IS1 Conditions VC, IH VC, IL IC, IH Conditions IC, IL Conditions -5 VC=2V 0 VC=0V -5 2.0 0.8 40 VC=2V 0 VC=0V -5 1.1 VIN=3.3V 2.0 0.8 40 VC=2V 0 VC=0V VIN=3.3V, VC=0V 0.3 Tj=0 to 100C (VC=2.5V) 55 VIN=3.3V, f=100 to 120HZ (VO=2.5V) IO=0.5A (VO=2.5V) 0.6 IO=1A (VO=2.5V) 350 VIN=3.3V, IO=0A, VC=2V, R2=24k 1 VIN=3.3V, VC=0V 0.3 Tj=0 to 100C 55 VIN=3.3V, f=100 to 120HZ 1.1 VIN=3.3V 2.0 0.8 40 VIN=3.3V, IO=0A, VC=2V 1 VIN=5V, VC=0V 0.3 Tj=0 to 100C 55 VIN=5V, f=100 to 120HZ 1.1 VIN=5V IO=1A 350 VIN=5V, IO=0A, VC=2V 1 2.4*1 1.24 1.28 VIN=3.3V, IO=10mA 15 VIN=3.3 to 8V, IO=10mA (VO=2.5V) 40 VIN=3.3V, IO=0 to 1A (VO=2.5V) 0.4 IO=0.5A 0.6 IO=1A 350 VIN=3.3V, IO=0 to 1A 0.4 IO=0.5A 0.6 VIN=3.3 to 8V, IO=10mA 40 VIN=5V, IO=0 to 1A 0.4 V 1.32 SI-3012KM (Variable type) typ. max. min. *1 SI-3025KM typ. 2.50 VIN=3.3V, IO=10mA 15 max. 2.55 min. *1 SI-3033KM typ. 3.300 VIN=5V, IO=10mA 15 VIN=5 to 10V, IO=10mA 50 max. Unit V 3.366 V mV mV 2.45 3.234 A A mV/ C dB A V A A *1: Refer to the Dropout Voltage parameter. *2: IS1 is specified at the 5% drop point of output voltage VO on the condition that VIN=overcurrent protection starting current, IO = 10 mA). *3: Output is OFF when output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs. 16 ICs SI-3000KM Series Electrical Characteristics 2 (High VO type) Ratings Parameter Input Voltage Output Voltage (Reference voltage VADJ for SI-3010KM) Line Regulation Conditions VOLOAD Load Regulation Conditions VDIF Dropout Voltage Conditions Conditions Iq Quiescent Circuit Current Conditions Circuit Current at Output OFF Temperature Coefficient of Output Voltage Ripple Rejection Conditions Overcurrent Protection Starting Current*2 Control Voltage (Output ON) Control Voltage (Output OFF) VC Control Current Terminal (Output ON) Control Current (Output OFF) Input Overvoltage Shutdown Voltage IS1 Conditions VC, IH VC, IL IC, IH Conditions IC, IL Conditions VOVP Conditions 33 IO=10mA -5 VC=2V 0 VC=0V 26 IO=10mA -5 2.0 0.8 40 VC=2V 0 VC=0V 30 IO=10mA -5 Iq (OFF) Conditions VO/Ta Conditions RREJ VIN=7V, VC=0V 0.5 Tj =0 to 100C (VO=5V) 75 VIN=7V, f=100 to 120Hz (VO=5V) 1.1 VIN=7V 2.0 0.8 40 VC=2V 0 VC=0V 33 IO=10mA -5 1.1 VIN=7V 2.0 0.8 40 VC=2V 0 VC=0V IO=0.5A (VO=5V) 0.6 IO=1A (VO=5V) 600 VIN=7V, IO=0A, VC=2V R2=10k 1 VIN=7V, VC=0V 0.5 Tj=0 to 100C 75 VIN=7V, f=100 to 120Hz 1.1 VIN=11V 2.0 0.8 40 VIN=7V, IO=0A, VC=2V 1 VIN=11V, VC=0V 1.0 Tj=0 to 100C 68 VIN=11V, f=100 to 120Hz 1.1 VIN=14V IO=1A 600 VIN=11V, IO=0A, VC=2V 1 VIN=14V, VC=0V 1.5 Tj=0 to 100C 66 VIN=14V, f=100 to 120Hz dB VIN=7V, IO=0 to 1A (VO=5V) 0.3 IO=0.5A 0.6 IO=1A 600 VIN=14V, IO=0A, VC=2V 1 Symbol VIN VO (VADJ) Conditions VOLINE VIN=6 to 11V, IO=10mA (VO=5V) 75 VIN=7V, IO=0 to 1A 0.3 IO=0.5A 0.6 IO=1A 600 SI-3010KM (Variable type) min. 2.4*1 0.98 1.00 1.02 30 VIN=7V, IO=10mA typ. max. min. *1 SI-3050KM typ. 5.00 max. 5.10 30 VIN=6 to 11V, IO=10mA 75 min. *1 SI-3090KM typ. 9.00 max. 9.18 54 VIN=10 to 15V, IO=10mA 135 VIN=11V, IO=0 to 1A 0.3 min. *1 SI-3120KM typ. 12.00 max. Unit V 12.24 72 mV 4.90 8.82 11.76 VIN=7V, IO=10mA VIN=11V, IO=10mA VIN=14V, IO=10mA V VIN=13 to 18V, IO=10mA 180 mV VIN=14V, IO=0 to 1A 0.3 IO=0.5A 0.6 V A A mV/ C A V A A V *1: Refer to the Dropout Voltage parameter. *2: IS1 is specified at the 5% drop point of output voltage VO on the condition that VIN=overcurrent protection starting current, IO = 10 mA). *3: Output is OFF when output control terminal (VC terminal) is open. Each input level is equivalent to LS-TTL level. Therefore, the device can be driven directly by LS-TTLs. *4: SI-3010KM, SI-3050KM and SI-3090KM, SI-3120KM cannot be used in the following applications because the built-in foldback-type overcurrent protection may cause errors during start-up stage. (1) Constant current load (2) Positive and negative power supply (3) Series-connected power supply (4) VO adjustment by raising ground voltage *5: VIN (max) and IO (max) are restricted by the relation PD = (VIN - VO) x IO. Please calculate these values referring to the Copper Laminate Area vs. Power Dissipation data as shown hereinafter. External Dimensions (TO252-5) 6.60 6.600.20 0.20 5.34 2.300.20 0.50 0.10 0.20 (Unit : mm) 5.340.20 (5.04) (1.50) 1.100.20 (5) R0 .25 SEATING PLANE 0.00 to 0.127 2.70 0.1 MAX 0.70 0.500.10 1.27 TYP 1 2 3 1.27 TYP 2.300.20 4 5 8 0 to 0.500.10 (1.00) 2.700.20 (0.89) Pin Assignment q VC w VIN e GND r VO t SENSE (ADJ for SI-3010KM/SI-3120KM) Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.33g 6.100.20 9.900.30 (4.41) (5) (5) 0.20 1.524+0.254 -0.127 9.900.30 ICs 17 1-1-1 Linear Regulator ICs Block Diagram SI-3010KM/SI-3012KM SI-3025KM/SI-3033KM/SI-3050KM/SI-3090KM/SI-3120KM VIN 2 4 VOUT VIN 2 4 VO 5 VC 1 + 5 ADJ TSD VC 1 + Sense TSD REF 3 GND REF 3 GND Typical Connection Diagram SI-3025KM/SI-3033KM/SI-3050KM/ SI-3090KM/SI-3120KM SI-3010KM/SI-3012KM D1*2 *1 D1*2 *1 VIN 2 + VO 4 + + VIN 2 VO 4 R1 + CIN sense VC GND 5 1 3 Load CO CIN VC GND ADJ 1 5 3 CO R2 CIN: Input capacitor (22 F or larger) CO: Output capacitor *1: SI-3012KM/3025KM/3033KM (22 F or larger) It comes with a circuit configuration that uses a low ESR capacitor for the output capacitor. If an electrolytic capacitor is used, oscillation may occur at a low temperature. SI-3010KM/3050KM/3090KM/3120KM (47 F or larger) If a low ESR capacitor is used, oscillation may occur. *2: D1: Reverse bias protection diode This diode is required for protection against reverse biasing between the input and output. (Sanken SJPL-H2 is recommended.) This diode is not required at VO 3.3 V. R1, R2: Output voltage setting resistors Output voltage can be set by connecting R1 and R2 as shown above. R2: 10 k is recommended (24 k for SI-3012KM). R1=(VO-VADJ)/(VADJ/R2) *3: For SI-3010KM, insert R3 in case of setting VO to VO 1.5V. Recommended value for R3 is 10k. Reference Data Copper Laminate Area-Thermal Resistance Glass-epoxy board : 30x30mm 100 90 Power Dissipation PD (W) Copper Laminate Area-Power Dissipation Glass-epoxy board : 30x30mm 1.5 Ta=25C 1 40C 60C 0.5 85C 0 j-a(C/W) 80 70 60 50 40 10 100 Copper Laminate Area (mm2) 1000 * Obtaining the junction temperature Measure the temperature TC at the lead part of the GND pin with a thermocouple, etc. Then, substitute this value in the following formula to obtain the junction temperature. Tj=PD x j-C + TC Load ( j-C = 6C/W) 10 100 Copper Laminate Area (mm2) 1000 Case temperature Tc measurement point 18 ICs qSI-3000KM Series sReference Data Copper Foil Area-Thermal Resistance Glass-epoxy substrate : 30x30mm 100 90 j-a (C/W) 80 70 60 50 40 10 100 Copper Foil Area (mm2) 1000 Copper Foil Area-Power Dissipation Glass-epoxy substrate : 30x30mm 1.5 Power Dissipation PD (W) Ta=25C 1 40C 60C 0.5 85C 0 10 100 Copper Foil Area (mm2) 1000 * Obtaining Junction Temperature Temperature of lead part of GND terminal: Measure TC with thermocouple. Substitute value to the following formula to obtain the junction temperature Case temperature measurement point Tj=PD x j-C + TC ( j-C = 6C/W) sExample of Soldering Pattern Design (Unit : mm) 6.0 6.1 2.4 5.88 2.5 1.27 0.47 0.8 7 qSI-3000KM Series sPacking Specifications 4.00.1 0.3 1.75 1.5 2.00.1 (Unit : mm) 7.50 10.5 16.0 B MA 8.0 X. 5 B:MIN 1.50 C:13.0 +0.5 -0.2 D:MIN 20.2 1.7 7.1 C D 2.65 X.5 MA Reel : Packing quantity 3000 pcs W3 W1 100 W2 W1 +2 -0 W2 MAX 22.4 mm W1 +3 -0.5 16.4 mm 16.4 mm 8 330 94 qSI-3000KM Series sSI-3012KM Typical Characteristics (Ta=25C) *At Vout=2.5V measurement (R2=24k) Dropout Voltage 1 Output Rise Characteristics 3 Line Regulation 2.54 2.52 Dropout Voltage VDIF (V) 0.8 Output Voltage VO (V) Output Voltage VO (V) 2.50 2.48 2.46 2.44 2.42 2.40 0 IO=0 to 1A 0.25A step 2 IO=0 to 1A 0.25A step 1 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1 0 1 2 3 4 2 4 6 8 10 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 2.52 Overcurrent Protection Characteristics 3 Quiescent Circuit Current 600 IO=0A VC=2V 500 2.50 2.48 VIN=3.3V 4V 5V 6V 8V 2 VIN=3.3V 4V 5V 6V Quiescent Circuit Current Iq (A) 1 1.2 1.4 1.6 Output Voltage VO (V) Output Voltage VO (V) 400 2.46 300 2.44 1 200 2.42 100 2.40 0 0.2 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 0 2 4 6 8 10 12 14 16 18 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 60 Output ON/OFF Control 3 Output ON/OFF Control Current 30 VC Terminal Control Current IC ( A) 25 Ground Current lG (mA) 40 Output Voltage VO (V) IO=1A 2 VIN=3.3V IO=0A 20 15 0.75A 20 0.5A 0.25A 0 2 4 6 0A 8 1 10 5 0 0.5 1 1.5 2 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) 9 qSI-3000KM Series sSI-3025KM Typical Characteristics (Ta=25C) Dropout Voltage 1 Output Rise Characteristics 3 Line Regulation 2.54 2.52 Dropout Voltage VDIF (V) 0.8 Output Voltage VO (V) Output Voltage VO (V) 2.50 2.48 2.46 2.44 2.42 2.40 0 IO=0 to 1A 0.25A step 2 IO=0 to 1A 0.25A step 1 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1 0 1 2 3 4 2 4 6 8 10 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 2.52 Overcurrent Protection Characteristics 3 Quiescent Circuit Current 600 IO=0A VC=2V 2.50 Quiescent Circuit Current Iq (A) 1 1.2 1.4 1.6 500 Output Voltage VO (V) Output Voltage VO (V) 2.48 VIN=3.3V 4V 5V 6V 8V 2 VIN=3.3V 4V 5V 6V 400 2.46 300 2.44 1 200 2.42 100 2.40 0 0.2 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 0 2 4 6 8 10 12 14 16 18 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 60 Output ON/OFF Control 3 Output ON/OFF Control Current 30 VC Terminal Control Current IC ( A) 25 Ground Current lG (mA) 40 Output Voltage VO (V) IO=1A 2 VIN=3.3V IO=0A 20 15 0.75A 20 0.5A 0.25A 0 2 4 6 0A 8 1 10 5 0 0.5 1 1.5 2 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermanl Protection Characteristics 3 Output Voltage VO (V) 2 VIN=3.3V IO=0.01A 1 0 40 80 120 160 180 Junction Temperature Tj (C) 10 qSI-3000KM Series sSI-3033KM Typical Characteristics (Ta=25C) Dropout Voltage 1 Output Rise Characteristics 4 Line Regulation 3.34 3.32 Dropout Voltage VDIF (V) Output Voltage VO (V) Output Voltage VO (V) 0.8 3 3.30 3.28 3.26 3.24 3.22 3.20 0 IO=0 to 1A 0.25A step 0.6 2 0.4 IO=0 to 1A 0.25A step 1 0.2 0 0.2 0.4 0.6 0.8 1 0 1 2 3 4 2 4 6 8 10 12 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 3.34 3.32 4 Overcurrent Protection Characteristics Quiescent Circuit Current 600 IO=0A VC=2V 500 3.30 3.28 3.26 3.24 3.22 3.20 0 VIN=4V 5V 6V 8V 3 Quiescent Circuit Current Iq ( A) 1 1.2 1.4 1.6 Output Voltage VO (V) Output Voltage VO (V) 400 2 VIN=4V 5V 6V 300 200 1 100 0.2 0.4 0.6 0.8 1 0 0.2 0.4 0.6 0.8 0 2 4 6 8 10 12 14 16 18 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 60 Output ON/OFF Control 4 Output ON/OFF Control Current 30 VC Terminal Control Current IC ( A) 2 25 Ground Current lG (mA) Output Voltage VO (V) 3 40 IO=1A VIN=5V IO=0A 2 20 15 0.75A 20 10 0A 0.5A 0.25A 0 2 4 6 8 1 5 0 0.5 1 1.5 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermanl Protection Characteristics 4 Output Voltage VO (V) 3 VIN=5V IO=0.01A 2 1 0 0 40 80 120 160 180 Junction Temperature Tj (C) 11 qSI-3000KM Series sSI-3010KM Typical Characteristics (Ta=25C) *At Vout=2.5 V measurement (R2=10 k) Dropout Voltage 0.6 Output Rise Characteristics 6 Line Regulation 5.04 5.02 Dropout Voltage VDIF (V) Output Voltage VO (V) 0.4 4 Output Voltage VO (V) 5.00 IO=0 to 1A 0.2A step 2 4.98 0.2 4.96 IO=0 to 1A 0.2A step 4.94 0 0.2 0.4 0.6 0.8 1 0 2 4 6 8 4.92 4 6 8 10 12 14 16 18 20 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 5.04 Overcurrent Protection Characteristics 6 Quiescent Circuit Current 800 5.02 Quiescent Circuit Current Iq (A) Output Voltage VO (V) Output Voltage VO (V) 600 5.00 4 IO=0A VC=2V 4.98 VIN=6V 7V 8V 10V 12V 15V 400 4.96 2 4.94 VIN=6V 7V 8V 10V 15V 20V 200 4.92 0 0.2 0.4 0.6 0.8 1 0 0.5 1.0 1.5 2.0 0 10 20 30 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 80 6 Output ON/OFF Control VC Terminal Control Current IC ( A) Output ON/OFF Control Current 30 25 Ground Current lG (mA) 60 IO=1A 40 0.8A 0.2A 20 0.4A 0.6A 0A Output Voltage VO (V) 4 VIN=7V IO=0.01V 20 15 VIN=7V 2 10 5 0 2 4 6 8 10 0 1 2 3 4 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermal Protection Characteristics 6 6 Overinput Voltage Protection Characteristics Output Voltage VO (V) Output Voltage VO (V) 4 4 VIN=7V IO=0.01A 2 2 0 40 80 120 160 180 0 10 20 30 40 Junction Temperature Tj (C) Input Voltage VIN (V) 12 qSI-3000KM Series sSI-3050KM Typical Characteristics (Ta=25C) Dropout Voltage 0.6 Output Rise Characteristics 6 Line Regulation 5.04 5.02 Dropout Voltage VDIF (V) Output Voltage VO (V) 0.4 4 Output Voltage VO (V) 5.00 IO=0 to 1A 0.2A step 2 4.98 0.2 4.96 IO=0 to 1A 0.2A step 4.94 0 0.2 0.4 0.6 0.8 1 0 2 4 6 8 4.92 4 6 8 10 12 14 16 18 20 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 5.04 Overcurrent Protection Characteristics 6 Quiescent Circuit Current 800 5.02 Quiescent Circuit Current Iq (A) Output Voltage VO (V) Output Voltage VO (V) 25V 600 5.00 4 27V IO=0A VC=2V 4.98 VIN=6V 7V 8V 10V 12V 15V 400 4.96 2 4.94 VIN=6V 7V 8V 10V 15V 20V 200 4.92 0 0.2 0.4 0.6 0.8 1 0 0.5 1.0 1.5 2.0 0 10 20 30 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 80 6 Output ON/OFF Control VC Terminal Control Current IC ( A) Output ON/OFF Control Current 30 25 Ground Current lG (mA) 60 IO=1A 40 0.8A 0.2A 20 0.4A 0.6A 0A Output Voltage VO (V) 4 IIN=7V IO=0.01V 20 15 VIN=7V 2 10 5 0 2 4 6 8 10 0 1 2 3 4 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermal Protection Characteristics 6 6 Overinput Voltage Protection Characteristics Output Voltage VO (V) Output Voltage VO (V) 4 VIN=7V IO=0.01A 4 IIN=7V IO=0.01A 2 2 0 40 80 120 160 180 0 10 20 30 Junction Temperature Tj (C) Input Voltage VIN (V) 13 qSI-3000KM Series sSI-3090KM Typical Characteristics (Ta=25C) Dropout Voltage 0.6 Output Rise Characteristics 10 Line Regulation 9.04 Dropout Voltage VDIF (V) Output Voltage VO (V) Output Voltage VO (V) 8 0.4 9.02 9.00 6 IO=0 to 1A 0.2A step 4 8.98 0.2 8.96 IO=0 to 1A 0.2A step 8.94 2 0 0.2 0.4 0.6 0.8 1 0 2 4 6 8 10 12 8.92 8 10 12 14 16 18 20 22 24 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 9.04 Overcurrent Protection Characteristics 10 Quiescent Circuit Current 800 9.02 Output Voltage VO (V) 8 Quiescent Circuit Current Iq (A) Output Voltage VO (V) 600 9.00 28V IO=0A VC=2V 6 30V 25V VIN=10V 11V 12V 15V 20V 8.98 VIN=10V 11V 12V 15V 18V 20V 400 4 8.96 200 8.94 2 8.92 0 0.2 0.4 0.6 0.8 1 0 0.5 1.0 1.5 2.0 0 10 20 30 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 80 Output ON/OFF Control 10 Output ON/OFF Control Current 30 VC Terminal Control Current IC ( A) Ground Current lG (mA) Output Voltage VO (V) 60 IO=1A 40 0.8A 0.2A 8 VIN=11V IO=0.01A 6 25 20 VIN=11V 15 4 10 5 20 0.6A 0A 0.4A 2 0 5 10 15 20 0 1 2 3 4 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermal Protection Characteristics 10 Overinput Voltage Protection Characteristics 10 8 8 Output Voltage VO (V) Output Voltage VO (V) 6 VIN=11V IO=0.01A VIN=11V IO=0.01A 6 4 4 2 2 0 40 80 120 160 180 0 10 20 30 40 Junction Temperature Tj (C) Input Voltage VIN (V) 14 qSI-3000KM Series sSI-3120KM Typical Characteristics (Ta=25C) Dropout Voltage 0.6 Output Rise Characteristics 15 Line Regulation 12.04 12.02 Dropout Voltage VDIF (V) Output Voltage VO (V) Output Voltage VO (V) 12.00 12.98 12.96 12.94 12.92 12.90 10 IO=0 to 1A 0.2A step 0.4 10 IO=0 to 1A 0.2A step 5 0.2 0 0.2 0.4 0.6 0.8 1 0 5 10 15 20 12 14 16 18 20 22 24 26 Output Current IO (A) Input Voltage VIN (V) Input Voltage VIN (V) Load Regulation 12.04 12.02 Overcurrent Protection Characteristics 14 12 Quiescent Circuit Current 800 Quiescent Circuit Current Iq (A) Output Voltage VO (V) Output Voltage VO (V) 12.00 12.98 12.96 12.94 12.92 12.90 0 10 8 6 4 2 33V 35V 600 IO=0A VC=2V VIN=13V 14V 15V 23V 25V 30V VIN=13V 14V 15V 20V 25V 400 200 0.2 0.4 0.6 0.8 1 0 0.5 1.0 1.5 2.0 0 10 20 30 Output Current IO (A) Output Current IO (A) Input Voltage VIN (V) Circuit Current 80 14 12 Output ON/OFF Control VC Terminal Control Current IC ( A) Output ON/OFF Control Current 30 25 Ground Current lG (mA) 60 IO=1A 40 0.8A Output Voltage VO (V) 10 8 6 4 2 IIN=14V IO=0.01A 20 15 VIN=14V 0.2A 10 5 20 0.6A 0A 0.4A 0 5 10 15 20 25 0 1 2 3 4 0 1 2 3 4 Input Voltage VIN (V) VC Terminal Control Voltage VC (V) VC Terminal Control Voltage VC (V) Thermal Protection Characteristics 14 12 16 14 Overinput Voltage Protection Characteristics Output Voltage VO (V) Output Voltage VO (V) 10 VIN=14V IO=0.01A 8 6 4 2 12 10 8 6 4 2 VIN=14V IO=0.01A 0 40 80 120 160 180 0 10 20 30 40 Junction Temperature Tj (C) Input Voltage VIN (V) 15 |
Price & Availability of SI-3050KM |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |