 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Typical Applications The HMC747LC3C is ideal for: * RF ATE Applications Features Supports High Data Rates: up to 13 Gbps Differential & Singe-Ended Operation Fast Rise and Fall Times: 22 / 20 ps Low Power Consumption: 264 mW typ. Programmable Differential Output Voltage Swing: 700 - 1300 mV Propagation Delay: 105 ps Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm 2 7 HIGH SPEED LOGIC - SMT * Broadband Test & Measurement * Serial Data Transmission up to 13 Gbps * Digital Logic Systems up to 13 GHz Functional Diagram General Description The HMC747LC3C is a D-type Flip Flop designed to support data transmission rates of up to 13 Gbps, and clock frequencies as high as 13 GHz. During normal operation, data is transferred to the outputs on the positive edge of the clock. Reversing the clock inputs allows for negative-edge triggered applications. The HMC747LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input and output signals to the HMC747LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. Inputs and outputs can be connected directly to a 50 Ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC747LC3C operates from a single +3.3V DC supply and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifi cations, TA = +25C, Vcc = +3.3V Parameter Power Supply Voltage Power Supply Current Maximum Data Rate Maximum Clock Rate Input High Voltage Input Low Voltage Input Return Loss Output Amplitude Differential, peak-to-peak Output High Voltage 1100 3.25 mVpp V Frequency <13 GHz Single-Ended, peak-to-peak 2.8 2.1 10 550 Conditions Min. 3.0 Typ. 3.3 80 13 13 3.8 3.3 Max 3.6 Units V mA Gbps GHz V V dB mVpp 7 - 162 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Electrical Specifi cations, (continued) Parameter Output Low Voltage Output Rise / Fall Time Output Return Loss Random Jitter Jr Deterministic Jitter, Jd Propagation Delay Clock to Data, td Clock Phase Margin Set Up & Hold Time, tSH 13 GHz Differential, 20% - 80% Frequency <13 GHz rms peak-to-peak, 215 -1 PRBS input [1] 2 105 320 6 Conditions Min. Typ. 2 22 / 20 10 0.2 Max Units V ps dB ps rms ps, pp ps deg ps 7 HIGH SPEED LOGIC - SMT 7 - 163 [1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output DC Current vs. Supply Voltage [1] [2] 95 90 DC CURRENT (mA) 85 80 75 70 65 60 2.9 Output Differential vs. Supply Voltage [1] [2] 1200 1175 DIFFERENTIAL VOLTAGE (mV) +25C +85C -40C +25C +85C -40C 1150 1125 1100 1075 1050 1025 1000 2.9 3 3.1 3.2 3.3 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.4 3.5 3.6 3.7 SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) Rise / Fall Time vs. Supply Voltage [1] [2] 25 Output Differential vs. Frequency [1] 1300 OUTPUT DIFFERENTIAL (mV) 1200 1100 1000 900 800 700 600 500 2 4 6 8 10 12 14 16 18 23 RISE/FALL TIME (ps) 21 tr tf 19 17 15 2.9 3 3.1 3.2 3.3 3.4 3.5 SUPPLY VOLTAGE (V) 3.6 3.7 FREQUENCY (GHz) [1] VR = +3.3V [2] Frequency = 13 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Output Differential vs. VR [2] 1400 DIFFERENTIAL VOLTAGE (mV) Rise / Fall Time vs. VR [2] 25 1200 1000 RISE/FALL TIME (ps) 7 HIGH SPEED LOGIC - SMT +25C +85C -40C 23 21 800 19 tr tf 600 17 400 2.1 2.3 2.5 2.7 2.9 VR (V) 3.1 3.3 3.5 3.7 15 2.1 2.3 2.5 2.7 2.9 VR (V) 3.1 3.3 3.5 3.7 Input Return Loss vs. Frequency 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 0 2 4 6 8 10 12 14 FREQUENCY (GHz) Output Return Loss vs. Frequency -10 -15 RETURN LOSS (dB) -20 -25 -30 -35 0 2 4 6 8 10 12 14 FREQUENCY (GHz) [1] VR = +3.3V [2] Frequency = 13 GHz 7 - 164 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Eye Diagram [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 13 Gbps PN code. Both output channels shown. Device is AC coupled to scope. 7 HIGH SPEED LOGIC - SMT Timing Diagram tc = I fclock tc - tSH tc tSH = Setup and Hold Time CPM = Clock Phase Margin = 360 Truth Table Input D L H Notes: D = DP - DN C = CP - CN Q = QP - QN C L -> H L -> H H - Negative voltage level L - Positive voltage level Outputs Q L H For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 165 HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Absolute Maximum Ratings Power Supply Voltage (Vcc) Input Signals Output Signals -0.5V to +3.7V Vcc - 2V to Vcc + 0.5V +1V to +3.7V -65C to +150C -40C to +85C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 HIGH SPEED LOGIC - SMT Storage Temperature Operating Temperature Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND. 7 - 166 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Pin Descriptions Pin Number 1, 4, 5, 8, 9, 12 Function GND Description Signal Grounds Interface Schematic 7 HIGH SPEED LOGIC - SMT 7 - 167 2, 3 DN, DP Data Inputs 6, 7 CP, CN Clock Inputs 10, 11 QN, QP Data Outputs 13, 16 14, Package Base Vcc GND Positive Supply Supply Ground Output level control. Output level may be adjusted by applying a voltage to VR per "Output Differential vs. VR" plot. 15 VR For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Evaluation PCB 7 HIGH SPEED LOGIC - SMT Item J1 J2 J3 J4 J5 J6 J7 J8 J9 Description DN DP CP CN QN QP GND VR Vcc List of Materials for Evaluation PCB 122517 [1] Item J1 - J6 J7 - J9 JP1 C1, C2 C3 - C5 R2 U1 PCB [2] Description PCB Mount SMA RF Connectors DC Pin Shorting Jumper 4.7 F Capacitor, Tantalum 100 pF Capacitor, 0402 Pkg. 10 Ohm Resistor, 0603 Pkg. HMC747LC3C High Speed Logic, D-Type Flip-Flop 122515 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed package base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 7 - 168 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC747LC3C v01.1208 13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Application Circuit 7 HIGH SPEED LOGIC - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 169 |
Price & Availability of HMC747LC3C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |