Replaces MAX691 with MAX807 FEATURES * Correct-A-ChipTM technology solves problems associated with the use of alternate ICs (due to availability, obsolescence, need for better performance, etc.) by eliminating the need for new PCB's. GENERAL SPECIFICATIONS * FEMALE SOCKET MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon 170C continuous use temp. * PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick * MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * MALE PIN PLATING: 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] Ni per SAE AMS-QQ-N-290 CUSTOMIZATION: In addition to the standard products shown * FEMALE PIN BODY: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M on this page, Aries specializes in custom design and production. * FEMALE PIN BODY PLATING: 10 [0.254] Au per MIL-G-45204 over 100 Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the [2.54] Ni per SAE AMS-QQN- 290 right to change product general specifications without notice. * 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 * CONTACT PLATING: 10 [0.254] Au per MIL-G-45204 over 50 [1.27] Ni per SAE AMS-QQ-N-290 * MINIMUM CONTACT CURRENT RATING: 1 amp @ 5VDC ORDERING INFORMATION * OPERATING TEMPERATURE: 221F [105C] 16-304235-10 * INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead 16-304235-10-P for Panelized Version * WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead * NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead * SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.100- 0.125 2.54-3.18] long MOUNTING CONSIDERATIONS * SUGGESTED PCB HOLE SIZE: 0.028 0.002 [0.71 0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS MAX807 (socket) 1 3 4 5 6 9 10 11 12 14 16 All Others Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM MAX691 (male contacts) 9 3 11 4 14 15 14 12 13 1 2 N/C PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18075 Rev. AA
|