View CMO3EBMC_4541577.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CMO3 Series
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. PLEASE REFER TO THE M23.3V 5x7mm Surface Mount Crystal Clock Oscillators PRODUCT SERIES.
CMOS Compatible Tri-State Feature for Auto Test Systems Tape & Reel Packaging 20ppm Available - Please Contact Factory
CMO3 Series
MODEL
MODEL Frequency Range (MHz) Frequency Range (MHz) Frequency Stability (ppm) Frequency Stability Overall (Typical) (ppm)
E L E C T R I C A L S P E C I F I C AT I O N S E L E C T R I C A L S P E C I F I C AT I O N S CMO3
1.5 to CMO3 156.250
1.5 to 156.250
0C to 70C
Overall (Typical) 0C to 70C -40C to +85C
Inclusive of calibration, temperature, voltage, load, shock, vibration, aging
Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
25 50
-40C to +85C Operating Operating Storage Storage
25 50
Temperature Range (C)
Temperature Range (C)
-40C to to +125C -40C +125C
+3.3 10% +3.3 10% 1.5MHz to 35MHz MHz to 50 MHz >50 MHz 100MHz >100MHz to 156.25MHz 1.5 MHz to 20 MHz >20>35MHz to 50MHz >50MHz to to 67 MHz >67 MHz to 156.25 MHz <15 <25 <30 <55 <10 <10 <20 <30 1.5MHz to 50MHz
-40C to to +85C +85C -40C
Supply Voltage Supply Voltage (V)(V) Input Current (mA) Input Current (mA)
Symmetry (%) CMOS Transition Time 20% Rise Time (ns) to 80% Vdd Rise Time (ns) Fall Time (ns) Load
Load Fall Time (ns) Transistion Times
Symmetry (%) CMOS
45/55
45/55
1.5 MHz to 50 MHz <5 <5 <5
<5
>50 MHz to 156.250 MHz <3
<3 15pF 0.3 3.0
>50MHz to 156.250MHz
<3 <3
"0" Level (VOL) max "1" Level (VOH) min Start up Time (ms)
"0" Level (VOL) "1" Level (VOH)
15pF
Start up Time (ms)
10% Vdd 90% Vdd <10
<10
PA R T N U M B E R I N G G U I D E CMO3XXXC - Specify Frequency
"Blank" = 0oC to 70oC Operating Temp. "M" = -40oC to 85oC Operating Temp. "B" = 50ppm "C" = 100ppm
"A" = 25ppm (-40oC to 85oC Excluding Aging)
"D" = 20ppm Excluding Aging (Contact Factory) "Blank" = Fixed Frequency "E" = Tri-State
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
2553 N. Edgington Street, Franklin Park, IL 60131
Phone: 847.451.1000
Revision: 03-01-07 Fax: 847.451.7585
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
CMO3 Series
PIN 1 2 3
FUNCTION N/C / Tri-State Ground
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
Output THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. +V 4 PLEASE REFER TO THE M2 PRODUCT SERIES. CC
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
PIN 1 2 3 4 FUNCTION N/C / Tri-State Ground Output + VCC
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
Temperature Cycle Mechanical Shock Vibration Humidity Steady State Thermal Shock
REFERENCE PROCEDURES
MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD 883, Mtd 2007, Cond. B MIL-STD-202, Mtd 103 MIL-STD-883, Mtd 1011.7 Cond. B MIL-STD-883, Mtd 3015 Class II REFERENCE PROCEDURES Mtd Mtd Mtd Mtd
DESCRIPTION
-55C to +125C; Air-to-Air; 100 cycles; 10 min. dwell 1500 g's 20-2000 Hz; 0.06 inch; 15g's; 3 planes 40C; 90%-95% R.H.; 56 days 100C to 0C; Water-to-Water; 15 cycles 2 KV to 4 KV Threshold DESCRIPTION Solderto +125C; Air-to-Air; 100 cycles; 10 -55C dip; Meniscograph Criteria min. dwell Mass spectro. 2 x 10-8 atmos. CC/sec He 1500 g's 235C; 30 seconds 40C; 90%-95% R.H.; 56 days Resistance to solvents 100C to 0C; Water-to-Water; 15 cycles 125C, powered, 1000 hours minimum
Phone: 847.451.1000
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
MIL-STD-883, MIL-STD-833, MIL-STD-883, MIL-STD-883, MIL-STD-202, 2022.2 1010, Cond. B 1014.8, Cond. A1 2002, Cond. B 210D, Cond. J
Electrostatic Discharge TEST METHODS
Solderability Temperature Cycle Hermeticity Mechanical Shock Resistance to Soldering Lead Integrity Vibration HumidityPermanence Marking Steady State Thermal Shock Life Test Electrostatic Discharge Solderability Hermeticity
MIL-STD-883, 2004.5, Cond. MIL-STD 883, Mtd 2007, Cond. B A, B1 Lead tension0.06 inch; 15g's; 3 planes 20-2000 Hz; & bend stress MIL-STD-202, Mtd 103 MIL-STD-883, 2015.8 MIL-STD-883, Mtd 1011.7 Cond. B 1005.6 MIL-STD-883, Mtd 3015 Class II
2553 N. Edgington Street, Franklin Park, IL 60131
2 KV to 4 KV Threshold
235C; 30 seconds Resistance to Soldering MIL-STD-202, Mtd 210D, Cond. J 2 MIL-STD-883, and service(s) described herein without notice. No liability assumed as a result Lead reserves the right to make changes to the product(s) Mtd 2004.5, Cond. A, B1 Lead tension &isbend stress of their use or application. Integrity MtronPTI MIL-STD-883, Mtd 2015.8 Marking Permanence Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us forResistance to solvents your application specific requirements: MtronPTI 1-800-762-8800. Life Test MIL-STD-883, Mtd 1005.6
MIL-STD-883, Mtd 2022.2 Solder dip; Meniscograph Criteria MIL-STD-883, Mtd 1014.8, Cond. A1 Mass spectro. 2 x 10-8 atmos. CC/sec He 800-888-1499 or www.champtech.com
Fax: 847.451.7585
125C, powered, 1000 hours minimum
2553 N. Edgington Street, Franklin Park, IL 60131
Phone: 847.451.1000
Revision: 03-01-07 Fax: 847.451.7585
MtronPTI Lead Free Solder Profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.

▲Up To Search▲

Price & Availability of CMO3EBMC

	To Download CMO3EBMC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .