 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. KYL-813 wireless switch input and output KYL-813 module user manual Shenzhen KYL Communication Equipment Co., Ltd Address: Unit 5-7, Building3, Huangdu Square, South of Exhibition Center, Yitian Road, Futian District, Shenzhen Guangdong China Tel: +86-0755-83410815 Fax: +86-0755-83408785 Skype Skypelxmlosia Yahoo messenger: losia2012@yahoo.com MSN: kylcom01.com@hotmail.com E_mail: sales01@rf-data.com/kyl03losia@gmail.com Website: http://www.rf-data.com Fax: +86-0755-83408785 kyl03losia@gmail.com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. KYL-813 wireless ON-OFF input and output module is a wireless transmission equipment with four 2-channel DI and 2-channel relay DO. I. Function 2 channel ON-OFF DI and DO transmitting timely. The 2 channel switching condition for the transmitting equipment can be output timely at the receiver equipment. That is the switching condition for the transmitting equipment is shut down, while the switching condition will be shut down at the receiver equipment; and the transmitting equipment is disconnect, while the receiver equipment will disconnect. The following is the schematic diagram of the ON-OFF transmission. Schematic diagram II Feature: IIFeature: 1 2 3 2-channel coupler isolated inputs, high reliability and stability. 2-channel relay dry contact output, contact current is 30V 1A. collocate wireless data transmission module with 2-3km. Working frequency 433MHz(400-470MHz); Fax: +86-0755-83408785 kyl03losia@gmail.com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. RF power: 500mW; Receive sensitivity: -123dBm 4 5 6 Receive current: 30mA; transmitting current: 300mA Power supply: DC 12V Feature of the output contact as below follows: (the parameters of the relay inside): Fax: +86-0755-83408785 kyl03losia@gmail.com www.rf-data.com Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. III. Exterior sketch map III. VI. Connection Definition Connection name CN1 1 2 3 6 7 8 9 10 CN2 1 2 3 RXD TXD GND Receiving data Transmitting data Ground of the signal kyl03losia@gmail.com www.rf-data.com Pin No. VCC GND GND INT1 GND INT2 OUT1A OUT1B OUT2A OUT2B Definition DC 12V (9-15V) Power supply Remarks and First channel relay output When the relay shutting connected A contact First channel relay output B contact and Second channel relay When the relay shutting connected output A contact Second channel relay output B contact Enter the setting mode for the module, and the function of the interface will be effective Fax: +86-0755-83408785 Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. 4 5 GND PRO SET Ground of the signal Programme controlling Programme controlling low level.Connect the signal ground, then will enter the programme controlling mode 6 ANT NC ANT Antenna port Fax: +86-0755-83408785 kyl03losia@gmail.com www.rf-data.com |
Price & Availability of KYL-813
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |