 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BCE-95 Description Gamewell-FCI's Building Control Element (BCE-95) is the interface between the IF632 or IF650 Fire Alarm Control Panel (FACP) and building functions that require a three position (HOA) (On/Off/Auto) control capability. The BCE95 connects to the panel via the SLC circuit. The BCE-95 is assigned to a display (BCD) at the FACP via software programming. The BCD provides annunciation, control and feedback of the BCE-95 at the main FACP. The BCE-95 offers feedback input points for positive confirmation of the controlled device's activity. The BCE-95 is for either surface or flush mounted and has an integral LED that lights at device activation. Building Control Element BCE-95 Operation When an event is reported to the FACP that requires the activation of the BCE-95, the FACP communicates via the analog circuit to the BCE-95, and the selected building control relay is actuated. The integral LED then lights for annunciation of the device. In the event that a manual command is transmitted from the building control display (BCD) at the control panel, the BCE-95 device will respond and override the auto-programmed activation until the alarm event has been resolved and reset Features * * * * * * * * * * Compatible with IF632 & IF650 FACPs. LED annunciates activation. Fully supervised. Surface or flush mounting. Field programmable. Style four, six, or seven wiring. Screw terminals for field wiring connections. Dry relay contacts. Provides controllable relay functions. Provides positive feedback of relay control. Separate on/start, off/stop operation. Programming The BCE-95 is programmed by setting a single DIP switch easily accessible on the device's printed circuit board. The DIP switch is used to set the address of the BCE-95. All other programming is accomplished at the control panel, either through a laptop computer or the control panel operator's display. * An ISO 9000-2000 Company SIGNALING FM Microsoft(R) Windows(R) is a registered trademark of Microsoft(R) Corporation. S521 APPROVED 7300-1288:147 GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. (c)2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com CS-2041 Rev. A page 1 of 2 12 Clintonville Road, Northford, CT 06472-1610 USA * Tel: (203) 484-7161 * Fax: (203) 484-7118 CS-2041ph1.wmf Mounting The BCE-95 is designed to mount in a standard 4.0" (10.16 cm), 4.688" (11.908 cm) or double gang electrical backbox. The BCE-95 should be mounted in an easily accessible location so that the built-in LED may be seen for quick indication of proper connection and activation. A programmable remote interface along with a panel mounted three position switch unit shall be provided for the control and status reporting of programmed building control functions. The remote interface shall communicate with the main control panel via an SLC over a single pair of wires. The BCE-95 shall provide dry contacts and positive feedback of the controlled equipment's status. On/Off control and annunciation at the panel shall be provided via a building control display switch and annunciator unit. The remote interface shall be Gamewell-FCI BCE-95 with a GamewellFCI BCD display. Ordering Information Model BCE-95 70839 BCD Description Building control element device. XP95 protocol compatible. Trim ring for flush mounting the BCE-95. Building control display provides annunciation and ON/OFF/AUTO control of the BCE-95 control element devices, mounts at the FACP. One needed for every eight BCEs. Note: The Building Control Element (BCE-95) is only compatible with the IdentiFlex 632 & 650 FACPs. Specifications Standby Current: Alarm Current: Operating Temperature: Relative Humidity: Contact Rating: Input Power: Housing Requirements: 0.0008 A 0.0018 A 0 C to 49C (32F to 120 F) 85%, non-condensing 2.0 A at 30 VDC. 0.5 A at 120 VAC. 24 VDC from analog circuit. 4.0" (10.16 cm), 4.688" (11.908 cm), double gang electrical box. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA * Tel: (203) 484-7161 * Fax: (203) 484-7118 www.gamewell-fci.com CS-2041 Rev. A page 2 of 2 |
Price & Availability of BCD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |