View CEP-2242_4580787.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Part No: CEP-2242 Description: piezo audio indicator
Date: 7/21/2006 Unit: mm Page No: 1 of 4
Specifications
Resonant frequency Operating voltage Current consumption Sound pressure level Tone Operating tempurature Storage tempurature Dimensions Weight Material Terminal RoHS 4.1 KHz 0.5 3 ~ 16 V dc 7 mA max. 70 db min. Continuous -20 ~ +70 C -30 ~ +80 C 13.7 x H7.6 mm 1 g max. Noryl (Black) Pin type (Au Plating) yes at 12 V dc at 30 cm / 12 V dc
Appearance Drawing
Tolerance: 0.5
Phone: 800.275.4899
Fax: 503.372.1266
www.cui.com
9615 SW Allen Blvd Suite 103
Beaverton, OR 97005
Part No: CEP-2242 Description: piezo audio indicator
Date: 7/21/2006 Unit: mm Page No: 2 of 4
Voltage: Sound Pressure Level / Voltage: Current Consumption
Measurement Method
Phone: 800.275.4899
Fax: 503.372.1266
www.cui.com
9615 SW Allen Blvd Suite 103
Beaverton, OR 97005
Part No: CEP-2242 Description: piezo audio indicator
Date: 7/21/2006 Unit: mm Page No: 3 of 4
Mechanical Characteristics
Item Solderability Evaluation Standard Test Condition 90% min. of the lead terminals Lead terminals are immersed in rosin for will be wet with solder. (Except 5 seconds and then immersed in solder bath the edge of the terminal) of 270 5C for 3 1 seconds. Lead terminals are immersed up to 1.5mm from No interference in operation. buzzer's body in solder bath of 300 5C for 30.5 seconds or 260 5C for 10 1 seconds. No damage or cutting off. For 10 seconds, the force of 9.8N (1.0kg) is applied to each terminal in axial direction. The buzzer should be measured after applying The value of oscillation a vibration amplitude of 1.5 mm with 10 to frequency/current consumption 55 Hz band of vibration frequency to each of should be 10% of the initial the 3 perpendicular directions for 2 hours. measurements. The SPL should The part will be dropped from a height of be within 10dB compared with 75 cm onto a 40 mm thick wooden board 3 the initial measurement. times in 3 axes (X, Y, Z) for a total of 9 drops.
Soldering Heat Resistance
Terminal Mechanical Strength Vibration
Drop Test
Environment Test
Item High temp. test Low temp. test Humidity test Temp. cycle test Evaluation Standard Test Condition After being placed in a chamber at +80C for 240 hours. After being placed in a chamber at -30C for 240 hours. After being placed in a chamber at +40C and The buzzer will be measured after 905% relative humidity for 240 hours. The part should be subjected to 5 cycles. One being placed at +25C for 4 hours. The value of the cycle will consist of: oscillation frequency/current consumption should be 10% compared to the initial measurements. The SPL should be within 10dB compared to the initial measurements.
Phone: 800.275.4899
Fax: 503.372.1266
www.cui.com
9615 SW Allen Blvd Suite 103
Beaverton, OR 97005
Part No: CEP-2242 Description: piezo audio indicator
Date: 7/21/2006 Unit: mm Page No: 4 of 4
Reliability Test
Item Operating (Life Test) Test Condition 1. Continuous life test: The part will be subjected to 48 hours of continuous operation at +55C with rated voltage applied. 2. Intermittent life test: A duty cycle of 1 minute on, 1 minute off, a minimum of 5,000 times at room temp (+25 2C) with rated voltage applied. Evaluation Standard The buzzer will be measured after being placed at +25C for 4 hours. The value of the oscillation frequency/current consumption should be 10% compared to the initial measurements. The SPL should be within 10dB compared to the initial measurements.
Test Conditions
Standard Test Condition Judgement Test Condition a) Tempurature: +5 ~ +35C a) Tempurature: +25 2C b) Humidity: 45 - 85% b) Humidity: 60 - 70% c) Pressure: 860-1060 mbar c) Pressure: 860-1060 mbar
Packaging
Phone: 800.275.4899
Fax: 503.372.1266
www.cui.com
9615 SW Allen Blvd Suite 103
Beaverton, OR 97005

▲Up To Search▲

Price & Availability of CEP-2242

	To Download CEP-2242 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .