 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GaAs-Infrarot-Lumineszenzdiode (950 nm, 300 m Kantenlange) GaAs Infrared Light Emitting Diode (950 nm, 12 mil) F 0094U F 0094V Vorlaufige Daten / Preliminary data Wesentliche Merkmale * Typ. Gesamtleistung: 15 mW @ 100 mA im TOPLED(R) Gehause * Chipgroe 300 x 300 m2 * GaAs-LED mit sehr hohem Wirkungsgrad * Gute Linearitat (Ie = f [IF]) bei hohen Stromen * Gleichstrom- oder Impulsbetrieb moglich * Hohe Zuverlassigkeit * Hohe Impulsbelastbarkeit Anwendungen * Miniaturlichtschranken fur Gleich- und Wechsellichtbetrieb, Lochstreifenleser * Industrieelektronik * Messen/Steuern/Regeln" * Automobiltechnik * Sensorik * Alarm- und Sicherungssysteme * IR-Freiraumubertragung Typ Type F 0094U Bestellnummer Ordering Code on request Features * Typ. total radiant power: 15 mW @ 100 mA in TOPLED(R) package * Chip size 300 x 300 m2 * Very highly efficient GaAs LED * Good linearity (Ie = f [IF]) at high currents * DC or pulsed operations are possible * High reliability * High pulse handling capability Applications * Miniature photointerrupters * * * * * * Gehause Package Infrarot emittierender Chip, Oberseite Anodenanschlu, Oberflache aufgerauht Infrared emitting die, top side anode connection, surface frosted Infrarot emittierender Chip, Oberseite Anodenanschlu Infrared emitting die, top side anode connection Industrial electronics Drive and control circuits Automotive technology Sensor technology Alarm and safety equipment IR free air transmission F 0094V Q67220-C1268 2002-02-04 1 F 0094U, F 0094V Elektrische Werte (gemessen auf TO18-Bodenplatte ohne Verguss, TA = 25 C) Electrical values (measured on TO18 header without resin, TA = 25 C) Bezeichnung Parameter Wellenlange der Strahlung Wavelength at peak emission IF = 10 mA Spektrale Bandbreite bei 50% von Imax, IF = 10 mA Spectral bandwidth at 50% of Imax Sperrspannung Reverse voltage IR = 10 A, Symbol Symbol min. peak Wert1) Value1) typ. 950 max. nm Einheit Unit 55 nm VR 5 30 V Schaltzeiten, Ie von 10% auf 90% und von 90% auf tr, tf 10%, bei IF = 100 mA, RL = 50 Switching times, Ie from 10% to 90% and from 90% to 10%, IF = 100 mA, RL = 50 Durchlaspannung Forward voltage IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s Gesamtstrahlungsflu4) Total radiant flux4) IF = 100 mA, tp = 20 ms F 0094U F 0094V Temperaturkoeffizient2) von Temperature coefficient2) of IF = 100 mA; Temperaturkoeffizient2) von VF Temperature coefficient2) of VF IF = 100 mA; 0.5/0.4 s VF e 1.35 3.0 1.5 V 4.8 4.2 TC 8 7 0.3 mW mW nm/K TCV -1.5 mV/K 2002-02-04 2 F 0094U, F 0094V Mechanische Werte Mechanical values Bezeichnung Parameter Chipkantenlange (x-Richtung) Length of chip edge (x-direction) Chipkantenlange (y-Richtung) Length of chip edge (y-direction) Durchmesser des Wafers Diameter of the wafer Chiphohe Die height Bondpaddurchmesser Diameter of bondpad Symbol Symbol min. 0.28 0.28 Wert1) Value1) typ. 0.3 0.3 76.2 170 185 135 200 max. 0.32 0.32 mm mm mm m m Einheit Unit Lx Ly D H d Bezeichnung Parameter Vorderseitenmetallisierung Metallization frontside Ruckseitenmetallisierung Metallization backside Trennverfahren Dicing Verbindung Chip - Trager Die bonding Wert Value Aluminium Aluminum Goldlegierung Gold alloy Sagen Sawing Kleben Epoxy bonding 2002-02-04 3 F 0094U, F 0094V Grenzwerte3) (TA = 25 C) Maximum Ratings3) (TA = 25C) Bezeichnung Parameter Maximaler Betriebstemperaturbereich Maximum operating temperature range Maximaler Lagertemperaturbereich Maximum storage temperatur range Maximaler Durchlastrom Maximum forward current Maximaler Stostrom maximum surge current tp = 10 s, D = 0.005 Maximale Sperrschichttemperatur Maximum junction temperature Symbol Symbol Top Tstg IF IS Wert Value - 40...+100 - 40...+100 100 3 Einheit Unit C C mA A Tj 125 C 2002-02-04 4 F 0094U, F 0094V Relative Spectral Emission2) Irel = f (), TA = 25 C OHR01938 Radiant Intensity2) e = f (IF) e 100 mA Single pulse, tp = 20 s, TA = 25 C 100 % e e (100 mA) 10 1 OHR00864 rel 80 60 10 0 40 20 0 880 920 960 1000 nm 1060 10 -1 10 -2 10 -1 10 0 A F 10 1 Forward Current2) ,IF = f (VF), single pulse, tp = 20 s, TA = 25 C Permissible Pulse Handling Capability2) IF = f (tP) duty cycle D = parameter, TA = 25 C OHR01554 10 1 10 4 OHR00865 F A F mA 5 D = 0.005 0.01 D= T F T 10 0 0.02 10 -1 10 3 0.05 0.1 0.2 5 10 -2 0.5 DC 10 2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 2 5 10 -3 0 1 2 3 4 5 6 V VF 8 2002-02-04 F 0094U, F 0094V Mazeichnung Chip Outlines 0.135 (0.0053) 0.3 (0.0118) p-contact 0.185 (0.0073) n-contact GMOY6080 Mae werden als typische1) Werte wie folgt angegeben: mm (inch) / Dimensions are specified as typical1) values as follows: mm (inch). 2002-02-04 6 F 0094U, F 0094V Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information generally describes the type of component and shall not be considered as assured characteristics or detailed specification. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our sales organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You will have to bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized by us for such purpose! Critical components5), may only be used in life-support devices or systems6) with the express written approval of OSRAM OS. 1) Typical (refered to as typ.) data are defined as long-term production mean values and are only given for information. This is not a specified value. For final electrical testing a spot check with sufficient statistical accuracy is carried out. Minimum and maximum values( refered to as min. and max.) refer to the limits of the sample measurement. 2) Based on data measured in OSRAM Opto Semiconductor's TOPLED(R) package. They represent typical1) data. 3) Maximum ratings are strongly package dependent and may differ between different packages. The values given represent the chip in an OSRAM OS TOPLED(R) package and are only valid for this package. 4) Value is referenced to the vendor's measurement system (correlation to customer product(s) is required). 5) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 6) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-02-04 7 |
Price & Availability of Q67220-C1268
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |