View MBRB2545CT_4666939.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MBRB2545CT
Preferred Device
SWITCHMODE] Power Rectifier
D2PAK Surface Mount Power Package
The D2PAK Power Rectifier is a state-of-the-art device that employs the Schottky Barrier principle with a platinum barrier metal.
Features http://onsemi.com
* * * * * * * *
Center-Tap Configuration Guardring for Stress Protection Low Forward Voltage 175C Operating Junction Temperature Epoxy Meets UL 94 V-0 @ 0.125 in Short Heat Sink Tab Manufactured - Not Sheared Similar in Size to the Industry Standard TO-220 Package Pb-Free Packages are Available
SCHOTTKY BARRIER RECTIFIER 30 AMPERES, 45 VOLTS
1 4 3
Mechanical Characteristics
* Case: Epoxy, Molded, Epoxy Meets UL 94 V-0 * Weight: 1.7 Grams (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * *
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Device Meets MSL1 Requirements ESD Ratings: Machine Model, C (>400 V) Human Body Model, 3B (>8000 V)
4 1 3 D2PAK CASE 418B STYLE 3
MARKING DIAGRAM
AY WW B2545G AKA
A Y WW B2545 G AKA
= Assembly Location = Year = Work Week = Device Code = Pb-Free Package = Diode Polarity
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
(c) Semiconductor Components Industries, LLC, 2007
1
March, 2007 - Rev. 10
Publication Order Number: MBRB2545CT/D
MBRB2545CT
MAXIMUM RATINGS (Per Leg)
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 164C) Total Device Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 160C) Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) Storage Temperature Range Operating Junction Temperature (Note 1) Symbol VRRM VRWM VR IF(AV) IFRM Value 45 Unit V
15 30 30
A A
IFSM IRRM Tstg TJ
150 1.0 -65 to +175 -65 to +175
A A C C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic Thermal Resistance,- Junction-to-Case - Junction-to-Ambient (Note 2) 2. When mounted using minimum recommended pad size on FR-4 board. Symbol RqJC RqJA Value 1.5 50 Unit C/W
ELECTRICAL CHARACTERISTICS (Per Diode)
Symbol VF Characteristic Instantaneous Forward Voltage (Note 3) Condition IF = 15 Amp, TJ = 25C IF = 15 Amp, TJ = 125C IF = 30 Amp, TJ = 25C IF = 30 Amp, TJ = 125C VR = 45 Volts, TJ = 25C VR = 45 Volts, TJ = 125C Min - - - - - - Typ - 0.50 - 0.65 - 9.0 Max 0.62 0.57 0.82 0.72 0.2 25 Unit V
IR
Instantaneous Reverse Current (Note 3)
mA
3. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
ORDERING INFORMATION
Device MBRB2545CT MBRB2545CTG MBRB2545CTT4 MBRB2545CTT4G Package D2PAK D2PAK (Pb-Free) D2PAK D2PAK (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 800 Units / Tape & Reel 800 Units / Tape & Reel Shipping 50 Units / Rail 50 Units / Rail
http://onsemi.com
2
MBRB2545CT
IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1000 200 100 40 20 10 4.0 2.0 1.0 0.4 0.2 0.1 0.04 0.02 0.01 0.004 0.002 0 IR , REVERSE CURRENT (mA) TJ = 150C 125C 100C 75C 25C
100 TJ = 125C 10 150C 1.0 25C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 VF , INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
10
20
30
40
50
VR, REVERSE VOLTAGE (VOLTS)
PF(AV) AVERAGE FORWARD POWER DISSIPATION (WATTS) ,
Figure 1. Typical Forward Voltage, Per Leg
32 28 24 20 16 12 8 4 0 0 4 8 12 16 20 24 28 32 IF, AVERAGE FORWARD CURRENT (AMPS) 36 40 (CAPACITIVE LOADS) IPK = 20 IAV 10 TJ = 125C (RESISTIVE LOAD) 5 IPK =p IAV DC IF(AV), AVERAGE FORWARD CURRENT (A) SQUARE WAVE
Figure 2. Typical Reverse Current, Per Leg
26 DC 24 22 20 18 SQUARE 16 14 12 10 8 6 4 2 0 145 150
155
160
165
170
175
TC, CASE TEMPERATURE (C)
Figure 3. Typical Forward Power Dissipation
Figure 4. Current Derating, Case per Leg
http://onsemi.com
3
MBRB2545CT
PACKAGE DIMENSIONS
D2PAK 3 CASE 418B-04 ISSUE J
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B-01 THRU 418B-03 OBSOLETE, NEW STANDARD 418B-04. DIM A B C D E F G H J K L M N P R S V INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40
C E -B-
4
V W
A
1 2 3
S
-T-
SEATING PLANE
K G D 3 PL 0.13 (0.005) H
M
W J
TB
M
VARIABLE CONFIGURATION ZONE L M
R
N U L
P L M
STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE
M
F VIEW W-W 1
F VIEW W-W 2
F VIEW W-W 3
SOLDERING FOOTPRINT*
8.38 0.33
10.66 0.42
1.016 0.04
5.08 0.20
3.05 0.12 17.02 0.67
SCALE 3:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
4
MBRB2545CT
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
5
MBRB2545CT/D

▲Up To Search▲

Price & Availability of MBRB2545CT

	To Download MBRB2545CT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .