![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FDS4675_F085 P-Channel PowerTrench(R) MOSFET February 2010 FDS4675_F085 40V P-Channel PowerTrench(R) MOSFET General Description This P -Channel MOSFET is a rugged gate version of Fairchild Semiconductor's advanced PowerTrench process. It has been optimized for power management applications requiring a wide range of gave drive voltage ratings (4.5V - 20V). tm Features * -11 A, -40 V RDS(ON) = 0.013 @ V GS = -10 V RDS(ON) = 0.017 @ V GS = -4.5 V * Fast switching speed * High performance trench technology for extremely low RDS(ON) * High power and current handling capability * Qualified to AEC Q101 * RoHS Compliant Applications * Power management * Load switch * Battery protection D SO-8 D D D 5 6 7 4 3 2 1 Pin 1 S S S G 8 Absolute Maximum Ratings Symbol V DSS V GSS ID PD Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed TA=25oC unless otherwise noted Parameter Ratings -40 20 (Note 1a) Units V V A W -11 -50 2.4 (steady state) 1.4 1.2 -55 to +175 Power Dissipation for Single Operation (Note 1a) (Note 1b) (Note 1c) TJ , TSTG Operating and Storage Junction Temperature Range C Thermal Characteristics RJA RJA RJ C Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case (Note 1a) (Note 1c) (Note 1) 62.5 (steady state), 50 (10 sec) 125 25 C/W C/W C/W Package Marking and Ordering Information Device Marking FDS4675 Device FDS4675_F085 Reel Size 13'' 1 Tape width 12mm Quantity 2500 units www.fairchildsemi.com (c)2010 Fairchild Semiconductor Corporation FDS4675_F085 Rev. A FDS4675_F085 P-Channel PowerTrench(R) MOSFET Electrical Characteristics Symbol BV DSS BVDSS TJ IDSS IGSSF IGSSR V GS(th) VGS(th) TJ RDS(on) TA = 25C unless otherwise noted Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage, Forward Gate-Body Leakage, Reverse (Note 2) Test Conditions V GS = 0 V, ID = -250 A ID = -250 A, Referenced to 25C V DS = -32 V, V GS = 0 V V GS = 20 V, V GS = -20 V V DS = 0 V V DS = 0 V Min -40 Typ Max Units V Off Characteristics -34 -1 100 -100 -1 -1.4 4.6 10 13 15 -25 44 4350 622 290 V DD = -20 V, V GS = -4.5 V, ID = -1 A, RGEN = 6 20 29 95 60 V DS = -20 V, V GS = -4.5 V ID = -11 A, 40 11 13 -2.1 (Note 2) mV/C A nA nA V mV/C 13 17 21 m On Characteristics Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance (Note 2) V DS = V GS , ID = -250 A ID = -250 A, Referenced to 25C V GS = -10 V, ID = -11 A V GS = -4.5 V, ID = -9.5 A V GS =-10 V, ID =-11 A, TJ =125C V GS = -10 V, V DS = -5 V, V DS = -20 V, f = 1.0 MHz V DS = -5 V ID = -11 A V GS = 0 V, -3 ID(on) gFS Ciss Coss Crss td(on) tr td(off) tf Qg Qgs Qgd IS V SD Notes: A S pF pF pF 36 46 152 96 56 ns ns ns ns nC nC nC A V Dynamic Characteristics Switching Characteristics Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Characteristics and Maximum Ratings Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward V GS = 0 V, IS = -2.1 A Voltage -0.7 -1.2 1. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 50C/W when mounted on a 1in2 pad of 2 oz copper b) 105C/W when mounted on a .04 in2 pad of 2 oz copper c) 125C/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDS4675_F085 Rev. A 2 www.fairchildsemi.com FDS4675_F085 P-Channel PowerTrench(R) MOSFET Typical Characteristics 50 VGS = -10V -6.0V -4.5V -3.5V RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE -3.0V 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0 10 20 30 40 50 -ID , DIRAIN CURRENT (A) -3.5V -4.0V -4.5V -6.0V -10V VGS = -3.0V -I D, DRAIN CURRENT (A) 40 30 20 -2.5V 10 0 0 0.5 1 1.5 2 2.5 3 -V DS, DRAIN TO SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.05 RDS(ON) ON-RESISTANCE (OHM) , ID = -5.5A 0.04 1.6 RDS(ON) NORMALIZED , DRAIN-SOURCE ON-RESISTANCE ID = -11A VGS = -10V 1.4 1.2 0.03 TA = 125 C 0.02 TA = 25 C 0.01 o o 1 0.8 0.6 -50 -25 0 25 50 75 100 o 125 150 0 2 2.5 3 3.5 4 4.5 5 -V GS, GATE TO SOURCE VOLTAGE (V) TJ , JUNCTION TEMPERATURE ( C) Figure 3. On-Resistance Variation with Temperature. 50 VDS = -5.0V -I D, DRAIN CURRENT (A) 40 o Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 100 -I S, REVERSE DRAIN CURRENT (A) VGS = 0V 10 1 0.1 0.01 0.001 0.0001 T A = 125 C 25 C -55 C o o o TA = -55 C 25 C 125 C o o 30 20 10 0 1 1.5 2 2.5 3 3.5 -V GS, GATE TO SOURCE VOLTAGE (V) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 -V SD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDS4675_F085 Rev. A 3 www.fairchildsemi.com FDS4675_F085 P-Channel PowerTrench(R) MOSFET Typical Characteristics 5 -V GS, GATE-SOURCE VOLTAGE (V) ID = -11A 4 6000 VDS = -10V -30V -20V f = 1 MHz VGS = 0 V CISS 5000 CAPACITANCE (pF) 4000 3000 2000 1000 0 0 10 3 2 1 C OSS C RSS 0 0 10 20 30 40 50 Q g, GATE CHARGE (nC) 20 30 40 -VD S, DRAIN TO SOURCE VOLTAGE (V) Figure 7. Gate Charge Characteristics. 100 RDS(ON) LIMIT 1ms 10ms 100ms 1 DC 0.1 VGS = -4.5V SINGLE PULSE o R JA = 125 C/W T A = 25 C 0.01 0.1 o Figure 8. Capacitance Characteristics. 50 P(pk), PEAK TRANSIENT POWER (W) SINGLE PULSE R JA = 125C/W TA = 25C 100s -I D, DRAIN CURRENT (A) 10 1s 40 30 10s 20 10 1 10 100 0 0.001 0.01 0.1 1 10 100 -VD S, DRAIN-SOURCE VOLTAGE (V) t1 , TIME (sec) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 0.2 RJA (t) = r(t) + RJA RJA = 125 C/W P(pk) t1 t2 o 0.1 0.1 0.05 0.02 0.01 0.01 SINGLE PULSE TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 0.01 0.1 t 1, TIME (sec) 1 10 100 1000 0.001 0.0001 0.001 Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design. FDS4675_F085 Rev. A 4 www.fairchildsemi.com FDS4675_F085 P-Channel PowerTrench(R) MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPowerTM PowerTrench(R) FRFET(R) The Power Franchise(R) (R) Auto-SPMTM Global Power ResourceSM PowerXSTM Green FPSTM Build it NowTM Programmable Active DroopTM Green FPSTM e-SeriesTM CorePLUSTM QFET(R) TinyBoostTM QSTM GmaxTM CorePOWERTM TinyBuckTM Quiet SeriesTM GTOTM CROSSVOLTTM TinyCalcTM IntelliMAXTM RapidConfigureTM CTLTM TinyLogic(R) ISOPLANARTM Current Transfer LogicTM TM TINYOPTOTM (R) MegaBuckTM DEUXPEED TinyPowerTM Dual CoolTM Saving our world, 1mW/W/kW at a timeTM MICROCOUPLERTM TinyPWMTM EcoSPARK(R) SignalWiseTM MicroFETTM TinyWireTM EfficentMaxTM SmartMaxTM MicroPakTM TriFault DetectTM SMART STARTTM MicroPak2TM (R) TRUECURRENTTM* MillerDriveTM SPM(R) SerDesTM STEALTHTM MotionMaxTM Fairchild(R) SuperFETTM Motion-SPMTM Fairchild Semiconductor(R) SuperSOTTM-3 OptiHiTTM FACT Quiet SeriesTM UHC(R) SuperSOTTM-6 OPTOLOGIC(R) FACT(R) (R) Ultra FRFETTM (R) OPTOPLANAR SuperSOTTM-8 FAST (R) UniFETTM SupreMOSTM FastvCoreTM VCXTM SyncFETTM FETBenchTM VisualMaxTM Sync-LockTM FlashWriter(R) * PDP SPMTM XSTM (R)* FPSTM Power-SPMTM F-PFSTM tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handing and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative / In Design Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I47 Preliminary First Production No Identification Needed Obsolete Full Production Not In Production FDS4675_F085 Rev. A 5 www.fairchildsemi.com |
Price & Availability of FDS467510
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |