 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier Diode RB095B-30 Applications General rectification Dimensions(Unit : mm) Land size figure(Unit : mm) 6.0 Features 1)Power mold type.(CPD) 2)Low VF 3)High reliability CPD 16 1.6 2.3 2.3 Construction Silicon epitaxial planar Structure (2) (1) (3) Taping dimensions (Unit : mm) Absolute maximum ratings(Ta=25C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current(*1) Forward current surge peak (60Hz 1cyc)(*1) Junction temperature Storage temperature Limits Symbol VRM 35 VR 30 6 Io IFSM 35 150 Tj -40 to +150 Tstg (*1)Business frequencies, Rating of R-load, 1/2 Io per diode, Ta=125 C Unit V V A A C C Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Thermal impedance Symbol VF IR jc Min. - Typ. - Max. 0.425 200 6.0 Unit V A C/W IF=3.0A VR=30V junction to case www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 3.0 2.0 Conditions 6.0 1/3 2009.11 - Rev.F RB095B-30 Data Sheet Ta=150C 10 Ta=150C Ta=125C 1 Ta=25C Ta=75C Ta=-25C REVERSE CURRENT : IR(A) FORWARD CURRENT:IF(A) 1000000 100000 10000 Ta=125C 10000 f=1MHz Ta=75C 1000 100 10 1 0.1 Ta=-25C Ta=25C CAPACITANCE BETWEEN TERMINALS : Ct(pF) 1000 0.1 100 0.01 0 100 200 300 400 500 600 700 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 0.01 0 5 10 15 20 25 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 30 10 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS 440 Ta=25C IF=3A n=30pcs 200 180 REVERSE CURRENT : IR(A) 160 140 120 100 80 60 40 20 AVE:41.0A CAPACITANCE BETWEEN TERMINALS : Ct(pF) Ta=25C VR=30V n=30pcs 2000 1950 1900 1850 1800 1750 1700 1650 1600 1550 1500 Ct DISPERSION MAP IR DISPERSION MAP AVE:1617.3pF Ta=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE : VF(mV) 430 420 410 AVE:402.0mV 400 390 VF DISPERSION MAP 0 300 RESERVE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A) 250 200 150 AVE:63.0A 100 50 0 IFSM DISPERSION MAP Ifsm 8.3ms 1cyc 30 25 20 15 10 5 0 trr DISPERSION MAP AVE:19.3ns PEAK SURGE FORWARD CURRENT : IFSM(A) Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs 1000 Ifsm 8.3ms 8.3ms 1cyc 100 10 1 10 100 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 5 Rth(j-a) Rth(j-c) 1000 100 TRANSIENT C/W) THAERMAL IMPEDANCE : Rth ( PEAK SURGE FORWARD CURRENT : IFSM(A) Ifsm t 4 FORWARD POWER DISSIPATION : Pf(W) D=1/2 DC 10 3 Sin(=180) 100 Mounted on epoxy board 1 IM=100mA IF=3A 2 1ms time 1 300s 0.01 0.1 1 10 100 1000 0 0 5 10 15 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS 10 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.11 - Rev.F RB095B-30 Data Sheet 10 AVERAGE RECTIFIED FORWARD CURRENT : Io(A) 20 0A 15 0V t T Io AVERAGE RECTIFIED FORWARD CURRENT : Io(A) VR D=t/T VR=15V Tj=150C 20 0A 15 DC 10 D=1/2 5 Sin(=180) 0 0 25 50 75 100 125 150 0 25 50 75 100 125 150 AMBIENT TEMPERATURE : Ta(C) Derating Curve"(Io-Ta) CASE TEMPARATURE : Tc(C) Derating Curve"(Io-Tc) 0V t T Io VR D=t/T VR=15V Tj=150C 8 REVERSE POWER DISSIPATION : PR (W) Sin(=180) 6 D=1/2 DC 10 DC D=1/2 4 2 5 Sin(=180) 0 0 0 10 20 30 REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS 30 No break at 30kV 25 ELECTROSTATIC DISCHARGE TEST ESD(KV) 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k No break at 30kV ESD DISPERSION MAP www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.11 - Rev.F Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of RB095B-30
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |