 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SPEC NO : SPECIFICATION CUSTOMER PRODUCT MODEL NO PREPARED APPROVED SAW FILTER HDAF45A2DC SIP5Dc CHECKED D A T E 2007-8-1 CUSTOMER RECEIVED: CHECKED APPROVED DATE Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 1 of 8 SAW FILTER HDAF45A2DC SIP5Dc History Record Date Spec. No. Part No. Customer No. Modify Content Remark www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 2 of 8 SAW FILTER 1.SCOPE HDAF45A2DC SIP5Dc SHOULDER's SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer's name : SHOULDER ELECTRONICS LTD(CHINA) Type : AF45A2Dc YY:year WW:week www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 3 of 8 SAW FILTER 2.2. Circuit construction, measurement circuit HDAF45A2DC SIP5Dc 3.Characteristics Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15 to 35 Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -20 ~ +60 Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40 ~ +70 +25 Specifications Operating temperature rang There shall be no damage. Storage temperature rang Reference temperature www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 4 of 8 SAW FILTER 3.1 Maximum Rating DC voltage AC voltage VDC Vpp 12 10 V V HDAF45A2DC SIP5Dc Between any terminals Between any terminals 3.2 Electrical Characteristics Source impedance Zs=50 Load impedance ZL= 50 Item Freq Insertion attenuation 41.25MHz Reference level 40.95MHz 41.55MHz 39.17MHz Relative attenuation 45.75MHz 42.17MHz 39.75MHz 47.25MHz 35.00~39.75MHz Sidelobe 45.75~55.00MHz Temperature coefficient min 14.3 0 -0.8 38.0 40.0 20.0 38.0 40.0 35.0 35.0 TA=25 typ max 16.3 1.5 0.7 42.0 50.0 28.0 45.0 50.0 41.0 48.0 -72 18.3 3.0 2.2 dB dB dB dB dB dB dB dB dB dB ppm/k 3.3Environmental Performance Characteristics Item Condition High The specimen shall be store at a temperature of temperature 802 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Low The specimen shall be store at a temperature of temperature -203 for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Humidity The specimen shall be store at a temperature of 402 with relative humidity of 90% to 96% for 964h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Thermal The specimen shall be subjected to 8 continuous shock cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Specifications Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in appearance. Page 5 of 8 SAW FILTER Temperature Duration 1 +25=>-40 0.5h 2 -40 4h 3 -40=>+85 2h 4 +85 4h 5 +85=>+25 0.5h 6 +25 1h Reflow soldering method Peak: 255 5 , 220 5, 40s At electrode temperature of the specimen. HDAF45A2DC SIP5Dc Resistance to Soldering heat Solder ability The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260+5/-0 More then 95% of for 5 sec. total area of the pins should be covered with solder 3.4Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1m high 3 times Lead pull www.shoulder.cn Specifications There shall be no damage. Pull with 1kg force for 30 seconds Fax:0755-82916881 E-mail:info@shoulder.cn Tel:0755-82916880 Page 6 of 8 SAW FILTER 90o bending with 500g weigh 2 times HDAF45A2DC SIP5Dc Lead bend 3.5Voltage Discharge Test Item Condition Surge Between any two electrode Specifications There shall be no damage 3.6 Frequency response www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 7 of 8 SAW FILTER HDAF45A2DC SIP5Dc www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 8 of 8 |
Price & Availability of HDAF45A2DC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |