 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HYD Series Submersible precision stainless steel pressure transmitters FEATURES * 0...0.1 to 0...4 bar, (0...1 to 0...40 mH2O) * For corrosive media * 4...20 mA output * Field interchangeable * Intrinsically safe (option)9 MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L)8, Polyethylene, Viton (EPDM) Housing: protection class IP 68 (according to DIN EN 60529) respectively NEMA 6P1 SPECIFICATIONS Maximum ratings Supply voltage2 (reverse polarity protection) intrinsically safe version (option) Temperature limits Storage Operating Compensated Proof pressure3 0.1 to 0.7 bar 0.7 to 1.5 bar 1.5 to 4.0 bar 13...40 V 17...28 V ELECTRICAL CONNECTION +Vs -20 to +70C -10 to +70C 0 to +65C +13 to 40 V red sensor V -Vs RL GND 6 bar 10 bar 15 bar bare black June 2008 / 580 1/4 www.sensortechnics.com HYD Series Submersible precision stainless steel pressure transmitters INDIVIDUAL PERFORMANCE CHARACTERISTICS (unless otherwise noted, VS = 24 V, tamb = 20C, RL=550 ) C haracteristics Operating pressure HYD0X1... HYD0X2... HYD0X4... HYD0X7... HYD1X0... HYD1X5... HYD2X0... HYD3X0... HYD4X0... Min. 0 0 0 0 0 0 0 0 0 3.968 15.968 Typ. Max. 0.1 0.2 0.4 0.7 1.0 1.5 2 3 4 U nit bar Zero pressure offset Full scale span6 Full scale output Thermal effects (0 to 65C) Non-linearity, hysteresis, repeatability5 Long term stability Response time (10 % to 90 %) Power consumption (IL = 20 mA) 4 4.000 16.000 20.0 0.015 0.015 4.032 16.032 mA Offset Span %FSS/C 0.2 0.1 %FSS %FSS/year ms mW 50 260 LOAD LIMITATION intrinsically safe version: R max = Vs - 13 V 0.02 A R max = Vs - 17 V 0.02 A June 2008 / 580 2/4 www.sensortechnics.com HYD Series Submersible precision stainless steel pressure transmitters ELECTROMAGNETIC CAPABILITY7 Test conditions Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-3: Grade 3 10 V/m, 80 MHz to 1000 MHz 80 % AMC (1 kHz) EN61000-4-4: Grade 3 2 kV EN61000-4-2: Grade 4 8 kV, contact discharge EN61000-4-6: Grade 3 0,15 to 80 MHz 10 V, 80 % AMC (1 kHz) Criterion A B B A Specification notes (for all devices): 1. The package is an all-sealed housing. For proper function the gage port is vented to the atmosphere through the connecting cable. Thus the vent tube of the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation formula. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0C to 65C relative to 20C. 5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 6. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 7. Tests are in accordance with EN61000-6-2, April 99. 8. On special request. Hastelloy(c) is available. 9. Certificate: ATEX II 1G (CENELEC EEx ia IIC T4). June 2008 / 580 3/4 www.sensortechnics.com HYD Series Submersible precision stainless steel pressure transmitters OUTLINE DRAWING O50 15 150 3m other lengths on request dimensions in mm mass: typ. 800 g (without cable) WIRE CONNECTION Color red black transparent bare Electrical connection +Vs -Vs vent tube1 case/shield ORDERING INFORMATION HYD HYD series submersible pressure ranges10 0X1: 0 to 0.1 bar 0X2: 0 to 0.2 bar 0X4: 0 to 0.4 bar 0X7: 0 to 0.7 bar 1X0: 0 to 1.0 bar 1X5: 0 to 1.5 bar 2X0: 0 to 2 bar 3X0: 0 to 3 bar 4X0: 0 to 4 bar Note 10: Other pressure ranges between 0.1 and 4.0 bar are available on request cable length in m (standard 3 m) cable version output signal 4: 4 - 20 mA pressure mode G: gage pressure xxx G 4 C x S E Option: intrinsically safe9 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. June 2008 / 580 4/4 www.sensortechnics.com |
Price & Availability of HYD0X1G4CXSE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |