 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| rev. page date 1 of 3 02/2008 PART NUMBER: VAT1-SMT series DESCRIPTION: dc-dc converter description Designed to convert fixed voltages into an isolated voltage, the VAT1-SMT series is well suited for providing board-mount local supplies in a wide range of applications, including mixed analog/digital circuits, test & measurement equip., process/machine controls, datacom/telecom fields, etc... The semi-regulated output can be followed by 3-terminal regulators to provide output protection, in addition to output regulation. features *isolated 1 W output *temperature range: -40C~+85C *unregulated *high efficiency to 79% *dual voltage output *small footprint *SMD package style *industry standard pinout *UL94-V0 package *no heatsink required *1K Vdc isolation *high power density *no external component required *low cost model number VAT1-S5-D5-SMT VAT1-S5-D9-SMT VAT1-S5-D12-SMT VAT1-S5-D15-SMT VAT1-S12-D5-SMT VAT1-S12-D9-SMT VAT1-S12-D12-SMT VAT1-S12-D15-SMT VAT1-S15-D5-SMT VAT1-S15-D9-SMT VAT1-S15-D12-SMT VAT1-S15-D15-SMT VAT1-S24-D5-SMT VAT1-S24-D9-SMT VAT1-S24-D12-SMT VAT1-S24-D15-SMT VAT1-S24-D24-SMT input voltage nominal range 5 Vdc 4.5~5.5 Vdc 5 Vdc 4.5~5.5 Vdc 5 Vdc 4.5~5.5 Vdc 5 Vdc 4.5~5.5 Vdc 12 Vdc 10.8~13.2 Vdc 12 Vdc 10.8~13.2 Vdc 12 Vdc 10.8~13.2 Vdc 12 Vdc 10.8~13.2 Vdc 15 Vdc 13.5~16.5 Vdc 15 Vdc 13.5~16.5 Vdc 15 Vdc 13.5~16.5 Vdc 15 Vdc 13.5~16.5 Vdc 24 Vdc 21.6~26.4 Vdc 24 Vdc 21.6~26.4 Vdc 24 Vdc 21.6~26.4 Vdc 24 Vdc 21.6~26.4 Vdc 24 Vdc 21.6~26.4 Vdc output voltage 5 Vdc 9 Vdc 12 Vdc 15 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc 5 Vdc 9 Vdc 12 Vdc 15 Vdc 24 Vdc output current max. min. 100 mA 10 mA 56 mA 6 mA 42 mA 5 mA 33 mA 4 mA 100 mA 10 mA 56 mA 6 mA 42 mA 5 mA 33 mA 4 mA 100 mA 10 mA 56 mA 6A 42 mA 5 mA 33 mA 4 mA 100 mA 10 mA 56 mA 6 mA 42 mA 5 mA 33 mA 4 mA 21 mA 2 mA efficiency 72% 75% 78% 79% 74% 76% 78% 79% 74% 75% 79% 79% 72% 74% 76% 77% 78% load regulation 10~15% 6.5~15% 6~15% 6~15% 10~15% 6.5~15% 6~15% 6~15% 10~15% 6.5~15% 6~15% 6~15% 10~15% 6.5~15% 6~15% 6~15% 6~15% UL60950-1 YES YES YES YES YES YES YES YES NO NO NO NO NO NO NO NO NO *VA(X)T1-Series with ALT PIN config. (see dimensions, page 2) OUTPUT SPECIFICATIONS item output power line regulation output voltage accuracy temperature drift output ripple noise switching frequency NOTE: 1. All specifications measured at TA=25C, humidity <75%, nominal input voltage and rated output load unless otherwise specified. test conditions for Vin change of 1% see tolerance envelope graph @ 100% load 20 MHz bandwidth 20 MHz bandwidth full load, nominal input min. 0.1 typ. max. 1 1.2 0.03 75 150 KHz units W % %/C mVp-p 50 75 500 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 rev. page date 2 of 3 02/2008 PART NUMBER: VAT1-SMT series DESCRIPTION: dc-dc converter GENERAL SPECIFICATIONS short circuit protection temperature rise at full load cooling operating temperature range storage temperature range soldering temperature storage humidity range case material safety MTBF <1 second 25C Max, 15C typ. free air convection -40C to +85C -55C to +125C 260C (1.5mm from case for 10 sec.) <95% plastic (UL94-V0) approved to UL60950-1 (E222736) >3,500,000 hrs. ISOLATION SPECIFICATIONS item isolation voltage insulation resistance test conditions tested for 1 min. test at 500 Vdc min. 1000 1000 typ. max. units Vdc M DIMENSIONS (mm) TYPICAL CHARACTERISTICS 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 rev. page date 3 of 3 02/2008 PART NUMBER: VAT1-SMT series DESCRIPTION: dc-dc converter APPLICATION NOTES: - Input filtering To reduce the reflected ripple current and minimize EMI, especially when the converter input is more than 2" away from the DC source, it is recommended to connect a low ESR electrolytic capacitor between Vin and Gnd. The values suggested are as shown in Table 1. If additional filtering is required, the capacitance may be increased, or expanded to an LC network as shown in Figure 1. - Minimum loading The converter needs a minimum of 10% loading to maintain output regulation. Operation under no-load conditions will not cause immediate damages but may reduce reliability, and cause performance not to meet specifications. - Regulation With a semi-regulated design, the converter's output voltage varies with load current and will change proportionally to the input voltage. If regulated output is needed, an external regulator can be used as shown in Figure 2. TABLE 1 Input Voltage 5V 12 V 15 V 24 V External Input Capacitance 4.7 F 2.2 F 2.2 F 1.0 F - Protection The converter has minimal protection against input overvoltage or output over-load, and may be permanently damaged if exposed to these conditions. An input clamping device can be used for input voltage limiting. An input fuse or an output fuse also be used to protect against over-loading. - Dual outputs used as a single output The +Vout and -Vout can be used to obtain a single output that is the sum of the two outputs. In this case, the COM pin - Output filtering An output capacitor is needed to meet output ripple requirements as shown in Table 2.Output capacitance may be increased for additional filtering, but should not exeed 10F or expanded to an LC network as in Figure 1. shouldn't be used. - External Regulator An external 3-terminal regulator can be connected to the output of the converter to achieve full regulation. Make sure the converter's output voltage provides sufficient head room for the regulator. An additional benefit is that the built-in protection features in the regulator, such as OCP, OTP, etc, will protect the converter also. In a complimentory supply, a negative output regulator must be used to achieve the negative regulated output. TABLE 2 Vout 5V 9V 12 V 15 V 24 V External Ouput Capacitance 4.7 F 2.2 F 1.0 F 0.47 F 0.33 F +Vin REG REG +Vout -Vin DC DC DC DC -Vin REG REG COM -Vout +Vout COM REG REG +Vin L C L +Vin -Vin DC DC C L C +Vout COM -Vout -Vin DC DC DC DC -Vout 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 |
Price & Availability of VAT1-S12-D12-SMT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |