 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs 67-21SUGC/S400-XX/TR8 Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free The product itself will remain within RoHS compliant version. Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material InGaN Emitted Color Super Green Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 1 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Package Dimensions Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 2 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. Notes: .All dimensions are in millimeters 67-21SUGC/S400-XX/TR8 Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) Symbol VR IF Topr Tstg Tsol ESD Pd IFP Rating 5 25 -40 ~ +85 -40~ +100 260 (for 5 second) 150 110 100 Unit V mA V mW mA Electro-Optical Characteristics (Ta=25) Parameter Symbol *Chip Rank. A4 Luminous Intensity Min. 150 250 300 ------------------------- Typ. 279 432 500 120 518 525 35 3.5 ----- Max. Unit Condition Iv A5 X6 ----- mcd IF=20mA Viewing Angle 21/2 p d VF IR ------------------------- ----------------4.3 50 deg nm nm nm V A IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current *67-21SUGC/S400-XX/TR8 Chip Rank Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 3 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 4 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 5 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is 0.1mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 6 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 min 300 Cycles 22 PCS. 22 PCS. 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 7 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 8 of 9 Prepared by: Bennett EVERLIGHT ELECTRONICS CO.,LTD. 67-21SUGC/S400-XX/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-671-213 http://www.everlight.com prepared date:07-29-2005 Rev. 3 Page: 9 of 9 Prepared by: Bennett |
Price & Availability of 67-21SUGCS400-XXTR8
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |