 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HI-REL RAD HARD IR EMITTERS 1.00 MIN. OD-800W FEATURES GLASS .006 HIGH MAX .015 ANODE (CASE) .209 .220 * Designed for high radiation tolerance * Excellent power degradation characteristics * High power output * Fast response * Hermetically sealed metal package .041 .183 .152 .187 .156 .017 .098 .112 .143 .150 .100 * MIL-S-19500 screening available * No internal coatings CATHODE .036 45 All surfaces are gold plated. Dimensions are nominal values in inches unless otherwise specified. Window caps are welded to the case. ELECTRO-OPTICAL CHARACTERISTICS AT 25C PARAMETERS Total Power Output, Po Peak Emission Wavelength, P Spectral Bandwidth at 50%, Half Intensity Beam Angle, Forward Voltage, VF Capacitance, C Rise Time Fall Time Reverse Breakdown Voltage, VR TEST CONDITIONS IF = 100mA IF = 50mA IF = 100mA IR = 10A VR = 0V MIN 2 TYP 3 810 50 80 1.45 3 4 150 60 60 1.8 MAX UNITS mW nm nm Deg Volts Volts pF nsec nsec ABSOLUTE MAXIMUM RATINGS AT 25C CASE Power Dissipation1 180mW 100mA 3A 3V 240C Continuous Forward Current Reverse Voltage Lead Soldering Temperature (1/16" from case for 10sec) 1Derate per Thermal Derating Curve above 25C 2Derate linearly above 25C Peak Forward Current (10s, 150Hz)2 THERMAL PARAMETERS Storage and Operating Temperature Range Maximum Junction Temperature Thermal Resistance, RTHJA1 Thermal Resistance, RTHJA2 -65C TO 150C 150C 400C/W Typical 135C/W Typical 1Heat transfer minimized by measuring in still air with minimum heat conducting through leads 2Air circulating at a rapid rate to keep case temperature at 25C OPTO DIODE CORP. 750 Mitchell Road, Newbury Park, California 91320 Phone (805) 499-0335 FAX (805) 499-8108 1 of 2 HI-REL RAD HARD IR EMITTERS 200 180 POWER DISSIPATION (mW) 160 140 120 100 80 60 40 20 0 25 50 75 100 125 AMBIENT TEMPERATURE (C) 150 NO HEAT SINK INFINITE HEAT SINK OD-800W 10 PEAK FORWARD CURRENT, Ip (amps) THERMAL DERATING CURVE MAXIMUM PEAK PULSE CURRENT t = 10s 1 t = 100s t = 500s MAXIMUM R AT ING S 0.1 t Ip T D= t T 0.01 0.01 0.1 1 DUTY CYCLE, D (%) 10 100 T Y P IC AL C HAR AC T E R IS T IC S 120 100 80 60 40 POWER OUTPUT vs NEUTRON IRRADIATION 120 RELATIVE POWER OUTPUT (%) DEGRADATION CURVE IF = 100mA IF = 50mA IF = 20mA RELATIVE POWER OUTPUT (%) 110 100 90 TESTED ENERGY GREATER THAN 10Kev 20 0 80 TCASE = 25C NO PRE BURN-IN PERFORMED 109 1010 1011 1012 NEUTRON FLUENCE (neutrons/cm2) 1013 70 101 102 103 STRESS TIME, (hrs) 104 105 100 RADIATION PATTERN 1.5 1.4 POWER OUTPUT vs TEMPERATURE RELATIVE POWER OUTPUT (%) RELATIVE POWER OUTPUT -80 -60 -40 -20 0 20 40 BEAM ANGLE, (deg) 60 80 100 80 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 60 40 20 0 -100 0.5 -50 -25 0 25 50 AMBIENT TEMPERATURE (C) 75 100 100 SPECTRAL OUTPUT 100 POWER OUTPUT vs FORWARD CURRENT RELATIVE POWER OUTPUT (%) POWER OUTPUT, P (mW) o 80 60 10 40 1 20 DC PULSE 10s, 100Hz 0 740 780 820 860 WAVELENGTH, (nm) 900 0.1 10 100 1,000 FORWARD CURRENT, IF (mA) 10,000 OPTO DIODE CORP. 750 Mitchell Road, Newbury Park, California 91320 Phone (805) 499-0335 FAX (805) 499-8108 2 of 2 |
Price & Availability of OD-800W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |