 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEL 30 Series, 30 Watt RoHS compliant Features Highest Power Density: 30W in 51x25x9.6mm Package UL 60950-1 Industry Standard Footprint Very high Efficiency Models with low Output Voltages: 2.5 & 3.3VDC Output Voltage adjustable Optional Remote On/Off Under Voltage Lockout Operating Temperature Range -25C to +71C Six-side shielded Metal Case Lead free Design, RoHS compliant 3 Year Product Warranty The TEL 30 Series is a new range of cost efficient, isolated 30W converters in a shielded metal case with excellent specification. The 10 models in this series feature 2:1 input range with 18-36 or 36-75 VDC. Overload and over voltage protection, under voltage shutdown as well as remote On/Off are features of this converter. Typical applications for the TEL 30 Series converter are communication and networking systems, industrial electronics and distributed power architectures. Models Ordercode TEL 30-2409 TEL 30-2410 TEL 30-2411 TEL 30-2412 TEL 30-2413 TEL 30-4809 TEL 30-4810 TEL 30-4811 TEL 30-4812 TEL 30-4813 36 - 75 VDC 18 - 36 VDC Input voltage range Output voltage 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC 2.5 VDC 3.3 VDC 5.1 VDC 12 VDC 15 VDC Output current max. 6`000 mA 6'000 mA 5'000 mA 2'500 mA 2'000 mA 6`000 mA 6'000 mA 5'000 mA 2'500 mA 2'000 mA Efficiency 84 % 86 % 84 % 88 % 88 % 84 % 86 % 88 % 88 % 88 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TEL 30 Series Input Specifications Input current (no load) Input current (full load) 24 Vin; 24 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; 48 Vin; 48 Vin; 24 Vin models: 40 mA typ. 48 Vin models: 20 mA typ. 2.5 Vout 3.3 Vout 5.0 Vout other output 2.5 Vout 3.3 Vout 5.0 Vout other output models: models: models: models: models: models: models: models: 744 mA typ. 959 mA typ. 1183 mA typ. 1420 mA typ. 372 mA typ. 480 mA typ. 592 mA typ. 710 mA typ. 30 Watt Start-up voltage / under voltage shut down Surge voltage (100 msec. max.) 24 Vin models: 17.8 VDC / 15.8 VDC 48 Vin models: 36 VDC / 33 VDC 24 Vin models: 50 V max. 48 Vin models: 100 V max. 1.0 % max. 10 % - Input variation Vin min. to Vin max. - Load variation 10 - 100 % 0.3 % max. 1.0 % max. 100 mVpk-pk max. 0.02 % / K 110% - 140% Iout max., foldback hiccup mode, indefinite (automatic recovery) 1.8 / 2.5 / 5 Vout models: 6'800 F max. 12 / 15 Vout models: 680 F max. - Operating - Case temperature - Storage -25 C ... +71 C (with derating) +105 C max. -50 C ... +125 C 2 %/K above 50C 95 % rel H max. > 600'000 h @ +25 C 1`500 VDC 1200 pF typ >1'000 Mohm 2.5 ... 100 VDC or open circuit. -1.0 ... +1.0 VDC or short circuit pin 3 and pin 2 5 mA max. 350 kHz typ. (pulse width modulation PWM) UL 60950-1, EN 60950-1, IEC 60950-1 CSA File No. 226037 http://directories.csa-international.org - Input/Output - Input/Output - Input/Output - On: - Off: - Off idle current: Output Specifications Voltage set accuracy Output voltage adjustment Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217E ground benign) Isolation voltage (60 sec) Isolation capacity Isolation resistance Remote On/Off (optional) Switching frequency (fixed) Safety standards Safety approvals All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEL 30 Series Physical Specifications Case material Potting material Weight Soldering temperature aluminum epoxy (flammability to UL 94V-0) 32 g (1.13 oz) max. 265 C / 10 sec. 30 Watt Output Voltage Adjustment Trim up Trim Trim down +Vout +Vout CW Ru - Vout (33 x Vout) - ( 30 x Vadj) Vadj - Vout Trim (36.667 x Vadj) - (33 x Vout) Vout - Vadj -Vout Rd Trim 10K Pot. CCW Trim up/down Ru [kOhm] = Rd [kOhm]= Outline Dimensions mm (inches) 50.8 (2.0) Pin-Out 10.16 10.16 (0.4) 15.24 (0.6) 10.16 25.4 (0.4) (1.0) 1 2 3 4 Bottom View Pin 1 2 3 4 5 6 +Vin (Vcc) -Vin (GND) Remote On/Off (optional) +Vout -Vout Trim 6 45.72 (1.8) (0.4) 5 Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.039 0.002) Pin pitch tolerance: 0.25 (0.01) Case tolerances: 0.5 (0.02) 5.08 Specifications can be changed any time without notice (0.2) (0.38) 9.6 Rev. 09/06 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of TEL3006
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |