P/Ns 1109522 and 1109523 DIP-to-JEDEC TO Adapter Socket
FEATURES * 8-pin DIP IC Socket on the top and a circular, 8-pin JEDEC TO male pin footprint on the bottom. ICs now available only in 8-pin DIPs can be readily-mounted on boards having JEDEC TO thru-hole footprints without having to redesign the board. GENERAL SPECIFICATIONS * SOCKET BODY: black UL 94V-0 glass-filled 4/6 Nylon 170C continuous use temp. * ADAPTER BOARD: FR-4, 0.062 [1.58] thick * FEMALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * FEMALE PIN PLATING: 10 [0.25] min. Au per MIL-G- 45204 over 100 [2.54] Ni per SAE-AMS-QQ-N- 290 * FEMALE PIN CONTACT: BeCu per UNS C17200, ASTM B194-08 * FEMALE PIN CONTACT PLATING: 10 [0.25] Au per MILG- 45204 over 50 [1.27] Ni per SAE-AMS-QQN- 290 * MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M * MALE PIN PLATING: 200 [5.08] Sn/Pb 93/7 per ASTM B579-73 over 100 [2.54] Ni per SAE-AMS-QQ-N-290 * CURRENT RATING: 3 amps * OPERATING TEMPERATURE: 221F [105C]1109522 * INSERTION FORCE: 180 grams/pin; based on a 0.018 [0.46] dia. test lead * WITHDRAWAL FORCE: 90 grams/pin; based on a 0.018 [0.46] dia. test lead * NORMAL FORCE: 140 grams/pin; based on a 0.018 [0.46] dia. test lead * ACCEPTS: leads 0.015-0.025 [0.38-0.64] in dia., 0.100-0.125 [2.54-3.18] long MOUNTING CONSIDERATIONS
CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice.
ORDERING INFORMATION
P/N 1109522 P/N 1109523 see Pin Layouts Below
* SUGGESTED PCB HOLE SIZE: 0.028 0.002 [0.71 0.05] dia.
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
18012 Rev. AB
|
