View YGUR302TM_4823386.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
Specification
SSC-YGUR302TM (Rev 1.0, General)
SSC
Drawn Approval
Customer
Approval
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
1. 2. 3. 4. 5. 6. 7. 8.
[ Contents ]
Absolute maximum ratings Electro-optical characteristics Characteristic diagram Soldering profile Outline dimension Packing Reel packing structure Precaution for use
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
SSC-YGUR302TM
Description
Small size suitable for compact appliances Surface-mounted and leadless chip LED device Tape and Reel packing Increases the life time of battery
SSC-YGUR302TM
Features
* 3.0 X 2.5 X 1.4 mm * Untinted, Inner lens type clear old * Wavelength : Yellow-Green - 571 nm Red - 638 nm (Red)
Applications
* Indicator * Other decoration lighting
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
1. Absolute maximum ratings
(Ta=25E )
Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operation Temperature Storage Temperature
Symbol Pd IF IFM *1 VR Topr. Tstg.
Value 66 30 60 5 -30 ~ 85
Unit mW mA mA V E E
-40 ~ 100
*1 IFM conditions: Pulse width TwA 0.1ms and Duty ratioA 1/10
2. Electro-Optical Characteristics
Parameter Symbol VF Forward Voltage YG VFM IF=1 uA RED YG Reverse Current IR VR=5V RED YG IV IF=20 I RED YG Wavelength e
D
(Ta=25E )
Condition IF=20 I
Color YG RED
Min 1.3 1.3 60 50 -
Typ 2.0 1.7 571 638 30 30 60 60
Max 2.5 2.2
Unit
V 1.8 1.8 100 E 100 130 120 nm RED YG nm RED YG 2e
1/2
Luminous Intensity*2
mcd
IF=20 I
Spectral Bandwidth
eA
IF=20 I
Viewing Angle*3
IF=20 I
RED
*2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 e 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance : Iv 3/4 10 %, e
D
3/4 2 nm, VF 3/4 0.1 V)
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Relative Luminous Intensity IV (%)
Forward Current [mA]
Forward current IF(mA)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
3. Characteristic Diagram
Forward Current vs Forward Voltage
100
Relative Intensity vs Forward Current
250
200
150
10
100
50
YG UR
1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4
YG UR
0 0 5 10 15 20 25 30 35 40 45 50 55
Forward Voltage [V]
Forward Current IF (mA)
Forward Current vs Derating Curve
40
Radiation Diagram
90
YG UR
35 30 25
1.0 0.8 0.6
150
120
60
20 15 10 5 0 -25
30
0.4 0.2
0.0 180
0 25 50
o
0
75
100
Ambient temperature Ta( C)
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
4. Soldering profile
Reflow Soldering Conditions/ Profile
(1) Lead Solder
* Preliminary heating to be at 150E * Soldering heat to be at 240E max. for 2 minutes max. max. for 5 seconds max.
(2) Lead-Free Solder
* Preliminary heating to be at 150E max. for 2 minutes max. * Soldering heat to be at 260E max. for 10 seconds max.
(3) Hand Soldering Condition
* Not more than 3 seconds @MAX280E , under Soldering iron.
[Note] In case the soldered products are reused in soldering process, we don't guarantee the products.
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
4.03/40. 1 2.03/4 0.05
+ 1.5 0 .1 -0
8.753/4 0.1
(2.75) 17.53/40 .05
8.03/4 0.2
22 13
3/40 .2
Label
Tolerance: 3/4 0.2, Unit: (R)
(1) Quantity:2,500pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be 3/4 0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10 angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
60
+0 .2 -0
+0 -3
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
5. Outline Dimension
2.5
Tolerance: 3/4 0.1, Unit: (R)
1.4 1.4
Polarity Mark
1.5
1.4
Cathode
Yellow Green
2.2
c
c
e
Red
3.0
1.0
1.7
2.0
1.0
Resin Lens
1.0
e
0.8 1.8
e
Anode P. C. B
0.6
e e
2.2
0.5min
Anode
[Recommended Solder pattern]
6. Packing
0.253/40.0 5
YG UR
4.03/4 0.1
1 .13/4 0. ?
180
11.4 9 3/40.
3
2 3/40.
2
0.9min
e
0.9
(0.5)
0.6 3/40
.1
0.9
Cathode
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
7. Reel Packing Structure
Re l
P / N : ##########
##
A|
C
i
: SC
-Y
GUR30
2TM
Lot N o
##########
1/4o
*(R)
: 2 50
Alumin Vinyl Bag
P/ N : # # # # # # # # # #
##
A|
C
i
: S C-
Y G UR30
2TM
Lot N o
##########
1/4o
*(R)
: 250
Outer Box
* M a t e r i a l : Pa TY 7i c
CHIP L
PART :S
pe a
r(
SW
3B
(B
))
PE nc h 24
S I Z E (m ) b 5 2 0 14 c 2
ED
S C - Y G U R 30 2TM , 0 0 EA
CH
IP a
L
ED b
COD Q 'Y T LO DA TN TE
E : 25 O :
SE
: :
O U L SE
MI
C O N D UC
TO
R
C O .,L T D
SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00)
Technical Data Sheet Z-Power LED X10490 Z-Power LED X10490
8. Precaution for Use
(1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5E (2) Attention after opened However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40E Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 603/4 5E . (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 803/4 5E or 12Hr at 1003/4 5E . (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (13) The LEDs must be soldered within seven days after opening the moisture-proof packing. (14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (15) The appearance and specifications of the product may be modified for improvement without notice. SSC-YGUR302TM SSCRevision 1.0 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.00) ~30E Humidity : 60%HR max.

▲Up To Search▲

Price & Availability of YGUR302TM

	To Download YGUR302TM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .