|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EIC4450-15 ISSUED: 03/30/2009 4.40-5.00GHz 15-Watt Internally Matched Power FET 2X 0.079 MIN 4X 0.102 FEATURES * * * * * * * * 4.40- 5.00GHz Bandwidth Input/Output Impedance Matched to 50 Ohms +42 dBm Output Power at 1dB Compression 10.5 dB Power Gain at 1dB Compression 31% Power Added Efficiency -46 dBc IM3 at Po = 31 dBm SCL Hermetic Metal Flange Package 100% Tested for DC, RF, and RTH 0.945 0.803 Excelics EIC4450-15 0.024 0.580 YYWW SN 0.315 0.685 0.010 0.158 0.617 0.004 0.055 0.095 0.055 0.168 ELECTRICAL CHARACTERISTICS (Ta = 25C) SYMBOL P1dB G1dB G PAE Id1dB IM3 IDSS VP RTH PARAMETERS/TEST CONDITIONS1 Output Power at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ 4500mA Gain at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ 4500mA Gain Flatness f = 4.40-5.00GHz VDS = 10 V, IDSQ 4500mA Power Added Efficiency at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ 4500mA Drain Current at 1dB Compression f = 4.40-5.00GHz Caution! ESD sensitive device. MIN 41 9.5 TYP 42 10.5 MAX UNITS dBm dB 0.7 31 4500 -43 -46 9000 -2.5 1.8 13000 -4.0 2.1 o dB % 5100 mA dBc mA V C/W Output 3rd Order Intermodulation Distortion f = 10 MHz 2-Tone Test; Pout = 31 dBm S.C.L2 VDS = 10 V, IDSQ 65% IDSS f = 5.00GHz Saturated Drain Current Pinch-off Voltage Thermal Resistance 3 VDS = 3 V, VGS = 0 V VDS = 3 V, IDS = 84 mA Note: 1. Tested with 30 Ohm gate resistor, forward and reverse gate current should nopt exceed 35mA and -5.1mA respectively. 2. S.C.L. = Single Carrier Level. 3. Overall Rth depends on case mounting. ABSOLUTE MAXIMUM RATING SYMBOLS PARAMETERS ABSOLUTE 15V -5V Output power reach 3dB Gain Compression point 175C -65C to +175C 71W 1 OPERATING 10V -4V 2 Vds Vgs Pin Tch Tstg Pt Drain-Source Voltage Gate-Source Voltage Input Power Channel Temperature Storage Temperature Total Power Dissipation (Tc=25) Output power reach 3dB Gain Compression point 175C -65C to +175C 71W Note: 1. Exceeding any of the above ratings may result in permanent damage. 2. Exceeding any of the above ratings may reduce MTTF below design goals. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 3 Version. 01 EIC4450-15 ISSUED: 03/30/2009 4.40-5.00GHz 15-Watt Internally Matched Power FET PERFORMANCE DATA 20 10 dB(S(1,2)) dB(S(2,1)) 0 -10 -20 -30 4.0 freq (4.000GHz to 5.500GHz) S(2,2) S(1,1) 4.3 4.6 4.9 5.2 5.5 freq, GHz Frequency GHz 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 S11 MAG 0.735 0.651 0.548 0.443 0.355 0.293 0.255 0.228 0.202 0.178 0.165 ANG -59.2 -81.1 -106.7 -136.2 -169.2 155.4 121.6 88.7 57.4 22.1 -22.1 MAG 3.207 3.636 3.977 4.195 4.255 4.184 4.087 3.961 3.855 3.774 3.682 S21 ANG 91.5 70.1 47.4 24.1 1.0 -21.1 -41.9 -61.8 -81.4 -100.9 -120.7 MAG 0.046 0.056 0.063 0.069 0.074 0.077 0.078 0.079 0.080 0.081 0.082 S12 ANG 32.0 10.1 -13.9 -37.0 -60.4 -82.8 -104.4 -124.9 -145.0 -164.5 175.0 MAG 0.376 0.318 0.277 0.270 0.283 0.307 0.325 0.336 0.337 0.329 0.310 S22 ANG -50.2 -79.4 -114.1 -151.3 175.4 148.5 127.5 109.1 93.0 76.8 59.4 Typical S-Parameters (T= 25C, 50 system, de-embedded to edge of package) VDS = 10 V, IDSQ 4500mA Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 3 Version. 01 EIC4450-15 ISSUED: 03/30/2009 4.40-5.00GHz 15-Watt Internally Matched Power FET G1dB v.s Frequency 14 12 G1dB/dB P1dB v.s.Frequency 43 39 P1dB/dBm 35 10 8 6 4 4.2 4.4 4.6 4.8 5 5.2 31 27 23 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 Frequency/GHz Frequency/GHz VDS = 10 V, IDSQ 4500mA DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 3 of 3 Version. 01 |
Price & Availability of EIC4450-15 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |