![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SP15U 15 WATT , Universal Input Fully Enclosed Switching Power Supply ELECTRICAL SPECIFICATIONS All specifications are typical at nominal input, full load. INPUT SPECIFICATIONS Input Voltage.............................................. AC 85-264V DC 110V-340V Input Frequency.......................................... 47 ~ 63 Hz Input Current.............................................. 0.17 ~ 0.36A Inrush Current (100/230VAC cold start) .................12 ~ 24A OUTPUT SPECIFICATIONS Output Voltage........................................... See Chart Output Adjustment.................................... 10% Efficiency.................................................... 70 ~ 79% Over-Voltage Protection.............................. Zener Limiter Over-Current Protection.............................. Automatic Recovery (105% min) Ripple and Noise........................................ 150 mVp-p max. Hold-Up Time............................................. 15-100 mS Line/Load Regulation.................................. See Chart Rise Time.................................................... 100 mS max. Leakage Current (100/230VAC)........................ Vin= 100V Vin= 230V 0.5mA max. 0.75mA max. FEATURES UNIVERSAL INPUT (AC85-264V) BUILT-IN OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION LIGHTWEIGHT CONSTRUCTION METAL CHASSIS WITH COVER COMPACT, LOW-PROFILE PACKAGES 3 YEAR WARRANTY GENERAL SPECIFICATIONS MTBF ......................................................... 211,000 Hours Isolation Voltage Primary to Secondary............... 3000VAC Primary to Case........................ 1500VAC. Secondary to Case.................... 500VAC. Isolation Resistance.................................... 100-Mohms min. ENVIRONMENTAL SPECIFICATIONS Operating Temperature .............................. 0-60C Derates linearly 2.5%/C after 50C Cooling........................................................ Convection Temperature Coefficient.............................. 0.02% / C Humidity.......................................................20-85% Rh (non-condensing) Storage Temperature.................................. -20C -- 85C Shock Vibration.......................................... Shock: 20G (3 directions each 3 times) Vibration: 10 ~ 55Hz SAFETIES / EMI TUV FCC-B EN 55022-B VCCI-II PHYSICAL SPECIFICATIONS Metal Enclosed - Terminal Block 64 Series MODEL SP15U-03S SP15U-05S SP15U-12S SP15U-15S SP15U-24S SP15U-48S OUTPUT VOLTAGE 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC 48 VDC OUTPUT CURRENT @100V @230V EFFICIENCY 70% 73% 77% 77% 78% 79% LINE REGULATION 20 mV max. 20 mV max. 30 mV max. 30 mV max. 30 mV max. 30 mV max. LOAD REGULATION 40 mV max. 50 mV max. 50 mV max. 50 mV max. 50 mV max. 50 mV max. 3.0 A 3.0 A 1.3 A 1.0 A 0.7 A 0.35 A 3.6 A 3.6 A 1.5 A 1.2 A 0.8 A 0.4 A SP15U NOTE: All specifications typical and nominal / full load and 25C unless otherwise noted. Mounting screw lenght should not exceed 0.31 inches or 8 mm. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice. * No. 6-32 mounting holes standard * Dimensions in mm * Terminal block or "pin" type connector available 65 |
Price & Availability of SP15U-03S
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |