|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller Technical Reference Manual AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller Copyright Copyright (c) 1997 - 2007. Alcor Micro, Corp. All Rights Reserved. No part of this data sheet may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Alcor Micro, Corp. Trademark Acknowledgements The company and product names mentioned in this document may be the trademarks or registered trademarks of their manufacturers. Disclaimer Alcor Micro, Corp. reserves the right to change this product without prior notice. Alcor Micro, Corp. makes no warranty for the use of its products and bears no responsibility for any error that appear in this document. Specifications are subject to change without prior notice. Revision History Date Aug 2007 Oct 2007 Revision 0.9W 1.00W Description Preliminary Release. Official Release Contact Information: Web site: http://www.alcormicro.com/ China ShenZhen Office Rm.2407-08, Industrial Bank Building No.4013, Shennan Road, ShenZhen,China. 518026 Phone: (0755) 8366-9039 Fax: (0755) 8366-9101 Los Angeles Office 9070 Rancho Park Court Rancho Cucamonga, CA 91730 USA Phone: (909) 483-8821 Fax: (909) 944-0464 Taiwan Alcor Micro, Corp. 4F, No 200 Kang Chien Rd., Nei Hu, Taipei, Taiwan, R.O.C. Phone: 886-2-8751-1984 Fax: 886-2-2659-7723 Santa Clara Office 2901 Tasman Drive, Suite 206 Santa Clara, CA 95054 USA Phone: (408) 845-9300 Fax: (408) 845-9086 Table of Contents 1. Introduction ............................................................ 1 1.1 Description...................................................................................1 1.2 Features........................................................................................1 2. Application Block Diagram ................................... 2 3. Pin Assignment ...................................................... 3 4. System Architecture and Reference Design ....... 7 4.1 AU6336 Block Diagram ...............................................................7 5. Electrical Characteristics ...................................... 8 5.1 Absolute Maximum Ratings........................................................8 5.2 Recommended Operating Conditions .......................................8 5.3 General DC Characteristics ........................................................8 5.4 DC Electrical Characteristics of 3.3V I/O Cells..........................9 5.5 USB Transceiver Characteristics ...............................................9 5.6 Power Switch Feature .................................................................13 6. Mechanical Information ......................................... 14 7. Abbreviations ......................................................... 16 i List of Figures Figure 2.1 Block Diagram..................................................................2 Figure 3.1 AU6336-MAS Pin Assignment Diagram .........................3 Figure 3.2 AU6336-MDF Pin Assignment Diagram .........................5 Figure 4.1 AU6336 Block Diagram ...................................................7 Figure 5.1 Card Detect Power-in Timing..........................................13 Figure 6.1 28 SSOP Mechanical Information Diagram ...................14 Figure 6.2 24 QFN Mechanical Information Diagram ......................15 List of Tables Table 3.1 AU6336-MAS Pin Descriptions.........................................4 Table 3.2 AU6336-MDF Pin Descriptions .........................................6 Table 5.1 Absolute Maximum Ratings .............................................8 Table 5.2 Recommended Operating Conditions .............................8 Table 5.3 General DC Characteristics ..............................................8 Table 5.4 DC Electrical Characteristics of 3.3V I/O Cells ...............9 Table 5.5 Electrical characteristics ..................................................9 Table 5.6 Static characteristicDigital pin .....................................10 Table 5.7 Static characteristicAnalog I/O pinsDP/DM..........10 Table 5.8 Dynamic characteristicAnalog I/O pinsDP/DM.....11 ii 1. Introduction 1.1 Description AU6336 is an USB2.0 high-speed transmission controller, which is designed as a bridge between USB and SD compatible flash card interface, such as SD, HS-SD, MMC, HS-MMC, RS-MMC, MMCmicro...etc. AU6336 can read digital contents stored on memory card designed to cover a wide area of applications such as digital cameras, PDAs, MP3 players and smart phones...etc. AU6336 inherits the high-performance and cost-efficiency character from Alcor's products, included power switch integration, dynamic icon utility support, and DMA engine integration. 1.2 Features Support USB V2.0 specification and USB Device Class Definition for Mass Storage, Bulk-Transport V1.0 Support SD/MMC compatible flash card Support the latest flash card specification: SD2.0 (SDHC), MSPro parallel mode (4-bit) Alcor DMA engine integrated for performance enhancement Work with default driver from Windows ME/2000/XP/Vista and Mac OS X; Windows 98/2000(SP1/SP2) and Mac OS 9 are supported by vendor driver from Alcor. Compliant to xD 1.2 spec. Ping-pong FIFO implementation for concurrent bus operation. Support multiple sectors transfer optimize performance Support Dynamic Icon Utility Support LED for bus operating indication Power switch integrated to reduce production BOM cost 5 3.3 and 3.3 1.8V regulators built in 28-SSOP package for SD/MMC 24-QFN package for SD/MMC AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 1 2. Application Block Diagram Following application diagram demonstrates a typical card reader using the AU6336 chip. By connecting the card reader to a desktop or notebook PC through USB bus, the AU6336 becomes a bus-powered, high speed USB card reader, which can be used as a bridge for data transfer between Desktop PC and Notebook PC. Figure 2.1 Block Diagram Digital Camera MP3 Player PC with USB Host Controller PDA SD/MMC AU6336 Moble Phones PC 2 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W 3. Pin Assignment There are two different form factor packages available to choose from. The following figure shows signal names for each pin and the table in the page after describes each pin in details. Figure 3.1 AU6336-MAS Pin Assignment Diagram GPI4 GND VDD REXT VD33P DP DM VS33P XI XO VDDU AGND5V AVDD5V VDD3V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 SDCLK SDDATA0 SDDATA3 CLED SDDATA2 SDWP SDDATA1 SDCMD SD_V33 VDD33C SDCDN VSSHM VDDHM V18 Alcor Micro AU6336-MAS 28-PIN SSOP 17 16 15 AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 3 Table 3.1 AU6336-MAS Pin Descriptions Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Pin Name GPI4 GND VDD REXT VD33P DP DM VS33P XI XO VDDU AGND5V AVDD5V VDD3V V18 VDDHM VSSHM SDCDN VDD33C SD_V33 SDCMD SDDATA1 SDWP SDDATA2 CLED SDDATA3 SDDATA0 SDCLK I/O I I I I I I/O I/O I I O I I I O I I I I I O I/O I/O I I/O O I/O I/O O Description Force to full speed '1' for normal [default] '0' for force to full speed. Core ground Core 1.8V power input UTMI reference resistor UTMI 3.3V power input USB DP USB DM UTMI 3.3V ground 12MHz crystal input 12MHz crystal output UTMI 1.8V input 5 to 3.3 regulator ground 5 to 3.3 regulator 5V input 5 to 3.3 regulator 3.3V output 3.3 to 1.8 regulator 1.8V output IO 3.3V power / 3.3 to 1.8 regulator 3.3V input IO 3.3V ground SD card detect Card power switch 3.3V input Card power switch output SD command SD data 1 SD write protect SD data 2 Card Access LED SD data 3 SD data 0 SD clock 4 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W The following figure shows signal names of each pin of the 24 QFN package and the table in the page after describes each pin in details. Figure 3.2 AU6336-MDF Pin Assignment Diagram SDDATA0 SDDATA3 SDCLK CLED 24 VD33P DP DM VS33P XI XO 1 REXT 2 3 4 5 6 7 VDDU AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W VDD 23 8 AVDD5V 22 21 20 19 18 SDDATA2 SDWP SDDATA1 SDCMD SD_V33 VDD33C 17 ALCOR MICRO AU6336 24PIN QFN 16 15 14 13 9 10 11 12 VDD3V V18 VDDHM SDCDN 5 Table 3.2 AU6336-MDF Pin Descriptions Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin Name VD33P DP DM VS33P XI XO VDDU AVDD5V VDD3V V18 VDDHM SDCDN VDD33C SD_V33 SDCMD SDDATA1 SDWP SDDATA2 CLED SDDATA3 SDDATA0 SDCLK VDD REXT I/O I I/O I/O I I O I I O O I I I O I/O I/O I I/O O I/O I/O O I I USB DP USB DM UTMI 3.3V ground Description UTMI 3.3V power input 12MHz crystal input 12MHz crystal output UTMI 1.8V input 5 to 3.3 regulator 5V input 5V to 3.3V regulator 3.3V output 3.3V to 1.8V regulator 3.3V input 3.3V to 1.8V regulator 1.8V output IO 3.3V power / 3.3 to 1.8 regulator 3.3V input SD card detect Card power switch 3.3V input Card power switch output SD command SD data 1 SD write protect SD data 2 Card access LED. Low for card present High for card absent Blink for card access SD data 3 SD data 0 SD clock Core 1.8V power input UTMI reference resistor 6 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W 4. System Architecture and Reference Design 4.1 AU6336 Block Diagram Figure 4.1 AU6336 Block Diagram USB USB Upstream Port XCVR SIE RAM SD/MMC Control FIFO SD MMC 1.8 V Processor ROM Arbitrator 3.3V Power Switch SD/MMC PWR 3.3V/1.8V Voltage Regulator 5V3.3V Regulator 12MHz XTAL 5V AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 7 5. Electrical Characteristics 5.1 Absolute Maximum Ratings Table 5.1 Absolute Maximum Ratings SYMBOL VDDHM VIN VOUT TSTG PARAMETER Power Supply Input Signal Voltage Output Signal Voltage Storage Temperature RATING -0.3 to VDDH +0.3 -0.3 to 3.6 -0.3 to VDDHM +0.3 -40 to 150 UNITS V V V O C 5.2 Recommended Operating Conditions Table 5.2 Recommended Operating Conditions SYMBOL VDDHM V18 VIN TOPR PARAMETER Power Supply Digital Supply Input Signal Voltage Operating Temperature MIN 3.0 1.62 0 0 TYP 3.3 1.8 3.3 MAX 3.6 1.98 3.6 85 UNITS V V V O C 5.3 General DC Characteristics Table 5.3 General DC Characteristics SYMBOL IIN IOZ CIN COUT CBID PARAMETER Input current Tri-state leakage current Input capacitance Output capacitance Bi-directional buffer capacitance CONDITIONS No pull-up or pull-down MIN -10 -10 TYP 1 1 2.8 2.8 2.8 MAX 10 10 UNITS A A F F F Pad Limit Pad Limit Pad Limit 8 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W 5.4 DC Electrical Characteristics of 3.3V I/O Cells Table 5.4 DC Electrical Characteristics of 3.3V I/O Cells SYMBOL VDDHM Vil Vih Vol Voh Rpu Rpd Iin Ioz PARAMETER Power supply Input low voltage CONDITIONS 3.3V I/O Limits MIN 3.0 TYP 3.3 MAX 3.6 0.8 UNIT V V V LVTTL Input high voltage Output low voltage Output high voltage Input pull-up resistance Iol=2~16mA Ioh=2~16mA PU=high, PD=low 2.4 55 40 -10 -10 75 75 1 1 110 150 10 10 2.0 0.4 V V K K A A Input pull-down resistance PU=low, PD=high Input leakage current Tri-state output leakage current Vin= VDDHM or 0 5.5 USB Transceiver Characteristics Table 5.5 Electrical characteristics Symbol VDD33 V18 ICC Parameter Analog supply Voltage Digital supply Voltage Operating supply current Conditions Min. 3.0 1.62 Typ. 3.3 1.8 Max. Unit 3.6 1.98 55 V V mA High speed operating at 480 MHz AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 9 Table 5.6 Static characteristicDigital pin Symbol Parameter Conditions Input levels VIL VIH Low-level input voltage High-level input voltage Output levels VOL VOH Low-level output voltage High-level output voltage VDDH-0.2 0.2 V V 2.0 0.8 V V Min. Typ. Max. Unit Table 5.7 Static characteristicAnalog I/O pinsDP/DM Symbol Parameter Conditions Min. Typ. Max. Unit USB2.0 TransceiverHS Input Levelsdifferential receiver VIDP-VIDM High speed differential measured at the 300 input sensitivity connection as application circuit High speed data signaling common mode voltage -50 range High speed squelch detection threshold High speed disconnection detection threshold Squelch detected No squelch detected Disconnection detected Disconnection not detected Output Levels 150 625 525 VHSDIFF mV VHSCM 500 100 mV mV mV mV mV VHSSQ VHSDSC VHSOI VHSOL VHSOH VCHIRPJ VCHIRPK High speed idle level output voltage(differential) High speed low level output voltage(differential) High speed high level output voltage(differential) Chirp-J output voltage differential Chirp-K output voltage differential Resistance Equivalent resistance Driver output impedance used as internal chip only -10 -10 -360 700 -900 10 10 400 1100 -500 mV mV mV mV mV RDRV 3 6 9 10 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W Overall resistance including external resistor Termination VTERM 40.5 45 49.5 VDI VCM VSE VOL VOH Termination voltage for pull-up resistor on pin 3.0 RPU USB1.1 TransceiverFS/LS Input Levelsdifferential receiver Differential input VIDP-VIDM 0.2 sensitivity Differential common 0.8 mode voltage Input Levelssingle-ended receivers Single ended receiver 0.8 threshold Output levels Low-level output voltage High-level output voltage 0 2.8 3.6 V V 2.5 V 2.0 0.3 3.6 V V V Table 5.8 Dynamic characteristicAnalog I/O pinsDP/DM Symbol Parameter Conditions Driver Characteristics High-Speed Mode tHSR tHSF High-speed differential rise time High-speed differential fall time Full-Speed Mode tFR tFF tFRMA CL=50pF10 to 90 ofVOH-VOL CL=50pF90 to 10 Fall time ofVOH-VOL Excluding the first Differential rise/fall time transition from idle matchingtFR / tFF mode Excluding the first Output signal crossover transition from idle voltage mode Rise time Low-Speed Mode tLR Rise time CL=200pF-600pF 10 to 90of VOH-VOL 75 300 ns 4 4 90 20 20 110 ns ns 500 500 ps ps Min. Typ. Max. Unit VCRS 1.3 2.0 V AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 11 tLF Fall time Differential rise/fall time matchingtLR / tLF Output signal crossover voltage High-level output voltage tLRMA VCRS VOH CL=200pF-600pF 90 to 10of VOH-VOL Excluding the first transition from idle mode Excluding the first transition from idle mode 75 300 ns 80 125 1.3 2.8 2.0 3.6 V V 12 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W 5.6 Power Switch Feature 1ms to 10ms ( Depend Load Capacitor ) 3.3V+/- 0.3V CARD_POWER 100ms + System Polling timing CARD_DETECT Figure 5.1 Card Detect Power-in Timing AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 13 6. Mechanical Information Figure 6.1 28 SSOP Mechanical Information Diagram 14 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W Figure 6.2 24 QFN Mechanical Information Diagram AU6336 USB2.0 SD/MMC Single LUN Card Reader Controller V1.00W 15 7. Abbreviations In this chapter some of the terms and abbreviations used throughout the technical reference manual are listed as follows. SIE SD MMC UTMI Serial Interface Engine Secure Digital Multimedia Card USB Transceiver Macrocell Interface About Alcor Micro, Corp. Alcor Micro, Corp. designs, develops and markets highly integrated and advanced peripheral semiconductor, and software driver solutions for the personal computer and consumer electronics markets worldwide. We specialize in USB solutions and focus on emerging technology such as USB and IEEE 1394. The company offers a range of semiconductors including controllers for USB hub, integrated keyboard/USB hub and USB Flash memory card reader...etc. Alcor Micro, Corp. is based in Taipei, Taiwan, with sales offices in Taipei, Japan, Korea and California. Alcor Micro is distinguished by its ability to provide innovative solutions for spec-driven products. Innovations like single chip solutions for traditional multiple chip products and on-board voltage regulators enable the company to provide cost-efficiency solutions for the computer peripheral device OEM customers worldwide. 16 AU6336 USB2.0 SD/MMC Single LUN Card Reader V1.00W |
Price & Availability of AU6336 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |