 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 306-1 USB 2.0 Common Mode Filter - 0805 These Coilcraft filters are designed to eliminate virtually all common mode noise in high-speed, differential mode signal transmission applications such as USB 2.0, IEEE1394 and LVDS. Most provide greater than 25 dB common mode attenuation and greater than 100 ohms impedance. The low profile design and standard 0805 footprint make it the ideal solution for designs where board space is at a premium. These dual-wound filters feature very low DC resistance and are available in eight values to meet your specific requirements. Coilcraft Designer's Kit C184 contains samples of all values shown here plus all values in our 1206USB and 0603USB series. To order, contact Coilcraft or purchase online at http://order.coilcraft.com. Common mode impedance typ (Ohms) 10 MHz 100 MHz 500 MHz Common mode attenuation typ (dB) Inductance2 DCR max3 10 MHz 100 MHz 500 MHz min (nH) (Ohms) Part number1 Isolation Irms4 (Vrms) (mA) 0805USB-421MB_ 0805USB-901MB_ 0805USB-172MB_ 0805USB-262MB_ 0805USB-372MB_ 0805USB-502MB_ 0805USB-672MB_ 0805USB-902MB_ 14 28 57 85 118 148 246 294 42 90 170 260 370 500 670 900 70 154 303 435 641 945 1231 1715 1.1 1.4 2.3 3.0 4.5 4.9 8.4 8.7 2.3 4.2 6.7 8.6 11.9 14.5 16.6 18.7 8.4 16.9 22.0 27.8 34.3 31.3 30.0 30.5 23 47 84 147 189 273 322 413 0.12 0.17 0.25 0.26 0.32 0.37 0.45 0.65 2 250 250 250 250 250 250 250 250 1 500 500 500 500 500 500 500 400 1. When ordering, please specify packaging code: 0805USB-902MBC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 3. DCR is specified per winding. 4. Average current per winding for a 20C rise from 25C ambient. 5. Operating temperature range -40C to 85C. 6. Electrical specifications at 25C. 0.080 0.004 2,03 0,10 0.055 0.004 1,40 0,10 3 0.004 0,10 0.020 0.040 0,51 1,02 0.040 1,02 2 1 2 4 0.030 0,76 1 0.014 0,36 0.050 0.004 1,27 0,10 4 3 3 4 0.018 0,46 Recommended Land Pattern 0.018 0,46 Terminations: Nickel/gold over silver palladium Tape and reel: 2000/7 reel; 7500/13 reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. Document 306-1 Revised 12/15/04 Document 306-2 USB 2.0 Common Mode Filter -- 0805 Typical Attenuation 0 5 10 -902 -672 Attenuation (dB) 15 -502 -372 -262 -172 -901 -421 20 25 30 35 Common mode Differential mode (typical for all parts) 40 1 10 100 1000 Frequency (MHz) Typical Impedance vs Frequency 10000 -902 -672 -502 -372 -262 -172 1000 Impedance (Ohms) -901 100 -421 10 1 1 10 100 1000 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 306-2 Revised 04/15/03 |
Price & Availability of 0805USB-172MB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |