 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS 3.3V SURFACE MOUNT 5.0 x 7.5mm LVDS CLOCK OSCILLATOR ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage Input Voltage (Vcc) UNITS MINIMUM -55 -0.5 -0.5 NOMINAL MAXIMUM 125 4.6 Vcc+0.5 UNITS C Vdc Vdc TABLE 2.0 MINIMUM (Fo) 200 -20 0 (Vcc) (Icc) 3.135 NOMINAL 3.3 -75 -95 -110 -125 -120 MAXIMUM 800 20 70 3.465 100 10 2 UNITS MHz ppm C Vdc mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 1 NOTE TABLE 1.0 NOTE X502 0713 622.08M X502 DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 80MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset The Connor-Winfield X502 is a 3.3V Crystal Controlled Oscillator (XO) with LVDS differential outputs. The X502 is designed for use with PLL systems requiring tight frequency stability vs. change in temperature and high frequency output over the commercial temperature range. The X502 is designed using a 2x or 4x PLL multiplication to achieve the high frequency output. INPUT CHARACTERISTICS PARAMETER Enable Input Voltage (Low) Disable Input Voltage (High) (Vil) (Vih) MINIMUM 0.7Vcc NOMINAL MAXIMUM 0.3Vcc UNITS Vdc Vdc FEATURES TABLE 3.0 NOTE 2 2 TABLE 4.0 MINIMUM (Vod) 250 45 NOMINAL 50 0.6 MAXIMUM 100 450 55 1.0 UNITS Ohms mV % nS NOTE 3 - 3.3V OPERATION LOW JITTER <2pS RMS TOTAL FREQUENCY TOLERANCE: 20ppm TEMPERATURE RANGE: 0 to 70C DIFFERENTIAL LVDS OUTPUTS SURFACE MOUNT PACKAGE LVDS OUTPUT CHARACTERISTICS PARAMETER LOAD Output Differential Voltage Duty Cycle at 50% Level Rise / Fall Time PACKAG E CHARACTERISTICS Package TABLE 5.0 Hermetically sealed ceramic package with grounded metal cover. TABLE 6.0 See solder profile on page 2. TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE PROCESS RECOMMENDATIONS Solder Reflow Notes 1.0 2.0 3.0 Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 10 years aging. When oscillator is disabled both output are in a high impedance state (Tri-State) Vod measured with 100 ohm resistor between the true output and the complementary output. ORDERING INFORMATION X502 - 622.08M LVDS CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: DS017 PAGE 1 OF 2 REV: 01 DATE: 04/03/07 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Layout Suggested Pad Layout Vcc X502 0713 622.08M Top View 1 Pin 1 Bottom View Top View Dimensional Tolerance: .005 (.127mm) Output Waveforms Pin 1 2 3 4 5 6 Pin Connections Function N/C Enable / Disable Ground (Case) Output Q Comp Output Q Vcc Test Circuit Solder Profile Temperature Q 260C 220C 180C 260C Vod 100 ohm 150C 120C 2 Q N/C E/D 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: DS017 PAGE 2 OF 2 REV: 01 DATE: 04/03/07 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of X502-62208M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |