 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LED - Lamp 15.11.2007 Radiation Infrared Type DH Technology AlGaAs/GaAs ELD-940-535 rev. 02 Case 5 mm plastic lens Description High-power, high-speed infrared LED in the widely used 940 nm range. Mounted in standard 5 mm housing without standoff leads 5,75 - 0,3 0,8 - 0,4 8,6 1 Anode Note: Special packages with standoff available on request 2,54 Applications 1,5 36,5 1,0 0,6 - 0,2 O5 Optical communications, safety equipment, automation, optical sensors, medical appliances Maximum Ratings Tamb = 25C, unless otherwise specified Parameter Forward current (DC) Peak forward current Power dissipation Operating temperature range Storage temperature range Junction temperature Soldering temperature t 5 s, 3 mm from case (tP 50 s, tP /T = 1/2) Test onditions Symbol IF IFM PD Tamb Tstg TJ TSd Value 150 250 250 -20 to +80 -40 to +100 100 260 Unit mA mA mW C C C C Optical and Electrical Characteristics Tamb = 25C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Forward voltage* Reverse voltage Radiant power Radiant power* Radiant intensity Radiant intensity* Peak wavelength Spectral bandwidth at 50% Viewing angle Switching time *measured after 30s current flow Symbol VF VF VF e e e e p 0.5 tr, tf Min Typ 1.2 1,3 Max 1.4 Unit V V V mW mW mW/sr mW/sr IF = 100 mA IR = 100 A IF = 20 mA IF = 100 mA IF = 20 mA IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA 5 4,5 10 50 930 6.5 32 14 70 940 45 30 500 950 nm nm deg. ns Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 1 of 3 LED - Lamp 15.11.2007 ELD-940-535 rev. 02 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 2 of 3 LED - Lamp 15.11.2007 ELD-940-535 rev. 02 Remarks concerning optical radiation safety* Up to a forward current of 85 mA, at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. If intended to operate at higher continuous current, this product would be classified as LED product Class 1M , according to standard IEC 60825-1:A2. Class 1M products are safe to eyes and skin under normal conditions, including when users view the light beam directly. Class 1M products produce either a highly divergent beam or a large diameter beam, so only a small part of the whole light beam can enter the eye. However, these LED products can be harmful to the retina if the beam is viewed using magnifying optical instruments. Therefore, users should not incorporate optics that could concentrate the output into the eyes. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Kopenicker Str.325 b, Haus 201 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 3 of 3 |
Price & Availability of ELD-940-535
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |