![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Features * Duplex SC Single Mode Transceiver * Industry Standard 1x9 Footprint * Long reach SONET OC-3 SDH STM-1 Compliant * Single +5V/ 3.3V Power Supply * PECL Differential Inputs and Outputs * Wave Solderable and Aqueous Washable * LED Multisourced 1x9 Transceiver Interchangeable * Class 1 Laser Int. Safety Standard IEC 825 Compliant * Uncooled Laser Diode with MQW Structure * Complies with Telcordia (Bellcore) GR-468-CORE * ATM 155 Mbps links Application * SONET/SDH Equipment Interconnect Application Absolute Maximum Rating Parameter Power Supply Voltage Output Current Soldering Temperature Operating Temperature Operating temperature Storage Temperature Symbol Vcc Iout Topr Topr Tstg Min. 0 0 0 -40 -40 Max. 6 30 240 70 85 85 Unit V mA C C C C 10 seconds on leads only C-13-155-T(3)-SSC7(9)(D/E) C-13-155-T(3)-SSC7(9)A(B/C) Note Recommended Operating Condition Parameter Power Supply Voltage Power Supply Voltage Data Rate Symbol Vcc Vcc Min. 4.75 3.1 Typ. 5 3.3 155 Max. 5.25 3.5 Unit V V Mbps Transmitter Specifications, (-40 1 155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Transmitter Specifications, (-40 (-40 0 -48 1.0 1100 - -37 -37 4.0 1600 dBm dBm dBm dBm dB nm Receiver Specifications, (-40 155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Connection Diagram 1. (Rx GND) 2. (RD +) 3. (RD-) 4. (SD) 5. (Rx Vcc) 6. (Tx Vcc) 7. (TD-) 8. (TD+) 9. (Tx GND) NC Top View NC Receiver Signal Ground Receiver Data Out Receiver Data Out Bar Signal Detect Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar Transmitter Data in Transmitter Signal Ground PIN 1 2 3 4 5 6 7 8 Warnings 9 Symbol RxGND RD+ RDSD RxVcc TxVcc TDTD+ TxGND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal dc power for the receiver section dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this pin to the transmitter ground plane Legal Notice 3 155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Recommended Circuit Schematic 5V Series The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. 4 155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Package Diagram SC Transceiver Assembly 10.4 mm Blank :Black Case A : Blue Case B/E :Blue Case C/D : Black Case 5 155 Mbps Single Mode Transceiver (Long-Reach) C-13-155(C)-T(3)-SSC7(9) Ordering Information C -13 - 155 - T(3) - SSC 7(9) (A/B/C/D/E) * Wavelength = 1310 nm * Communication protocol (155 Mbps) * +5V/(3.3V) Transceiver * Single mode fiber * Connector options * Ultra Long Reach * Blank: Black Case (10.4 mm) A: Black Case (10.4 mm) B/E: Blue Case (9.8mm) C/D: Black Case (9.8mm) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Luminents sole and absolute discretion. Luminent warrants performance of its products to current specifications only in accordance with the companys standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the companys Terms and Conditions of Sale for further warranty information. Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that Luminent is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. (c) Luminent, Inc. 2003 All rights reserved 20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 * LUMINENT.COM LUMNDS612-0603 6 |
Price & Availability of C-13-155-T-SSC9A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |