 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| celduc(R) r e l a i s S/CON/SCI0251700/B/25/09/08 PRELIMINARY DATA Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI0251700 u Latest high voltage IGBT technology generation. u New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient. u Ultra low output leakage current u Low control current consumption u Triggered control input to avoid linear control risks u Low conducted and radiated disturbances Control voltage range Max transient peak voltage Advised max. DC Mains peak voltage Max. Load Current (with heatsink) Connections M3 round tabs M5 round tabs Dimensions (WxHxD) 44.5 x 58.2 x 27 4.5-32VDC 1700V 820VDC 25ADC Weight DC Mains voltage range 820VDC Max Advised (Depends on protection clamping voltage) Load current range (with heatsink) Control input voltage range In & case / Out Insulation 0 to 25A 4.5-32VDC 4kV Fig. 2 (mm) 100g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to "-") LOW SIDE WIRING DIAGRAM (Load connected to "+") Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Fig. 3 INTERNAL DIAGRAM Proud to serve you Data given at Tambient=25C and subject to modification without previous notice r celduc e l a i (R) s celduc(R) r e l a i s S/CON/SCI0251700/B/25/09/08 PRELIMINARY DATA Page 2/5 UK CONTROL INPUT CHARACTERISTICS CHARACTERISTIC LABEL Ucnom Icnom Uc Ic Ucoffmax -Ucmax Rin VALUE 12-24VDC 35mADC 4.5 - 32VDC 25 - 42mADC 1VDC 32VDC Current limitation typical=4.3V See curve Typical= 3.5V INFO. Fig. 4 Ic (mADC) 45 40 35 30 25 20 15 10 5 0 0 2 4 6 8 CONTROL CURRENT vs. CONTROL VOLTAGE INPUT CIRCUIT Nom. Control voltage Nom. Control current Control voltage range Control current consumption Releasing control voltage Max. reverse control voltage Input impedance @25C -Icmax <100A 10 12 14 16 18 20 22 24 26 28 30 32 Uc (VDC) See curve TIME CHARACTERISTICS CHARACTERISTIC LABEL ton tdon toff tdoff F(on-off) VALUE 10s 600s 50s 100s 200Hz TIME CHARACT. Turn on time Turn on delay Turn off time Turn off delay Max. On-Off frequency POWER OUTPUT CHARACTERISTICS CHARACTERISTIC Mains voltage range Non-repetitive peak voltage Overvoltage protection Off-state max reverse voltage drop (internal diode) Maximum nominal currents Max. non-repetitive peak current LABEL Ut Utp D1 -Ut Ie max Iepeak Iemin Ielk max VCEsat Cout Rthjc Rthra Tthra Uimp Uimp Uimp Rio Cio Tjmax Tstg Tamb Tc Resistive 50A Ue VALUE Min = VCEsat Max (Advised) = 820VDC INFO. Depends on protection clamping voltage (D1) 1700V Not integrated A voltage clamping mean must be connected across the terminals 1 & 2 (see fig 1 & 2) Please consult us to select the right protective components 3.3V Motor Please contact us 40A / 1ms 5mA 1.5mA 3.3V 90pF 1.25K/W 10K/W 10 minutes 4kV 4kV 4kV 1G <8pF 175C -40->+100C -40->+90C 100C @Ie=16A See fig. 9 @Tc=25C POWER CIRCUIT Min. load current Max. leakage current Max. on-state voltage Typ. output capacitance Junction/case thermal resistance Built-in heatsink thermal resistance vertically mounted Heatsink thermal time constant Control inputs/power outputs insulation voltage Inputs/case insulation voltage Outputs/case insulation voltage Isolation resistance Isolation capacitance Maximum junction temperature Storage ambient temperature Operating ambient temperature Max. case temperature @Utp @Tjmax @Ie=16A @Utp @Tra=75C @Tra=60C See fig. 9 celduc(R) r e l a i s S/CON/SCI0251700/B/25/09/08 PRELIMINARY DATA Page 3/5 UK OUTPUT SWITCH CHARACTERISTIC CURVES Fig. 5 100 Ic (A) VOLTAGE DROP VS LOAD CURRENT Fig. 6 If (A) 280 REVERSE VOLTAGE DROP VS REVERSE CURRENT 80 240 200 60 160 40 Tj = 25c 20 Tj = 175c 120 Vf @25 Vf @175 40 80 0 0 0,5 1 1,5 2 2,5 0 Vcesat (V) 3 0 0,5 1 1,5 2 2,5 3 3,5 Vf (V) 4 Fig. 7 1 Zth (K/W) POWER ELEMENT TRANSIENT THERMAL IMPEDANCE vs. PULSE DURATION Fig. 8 ON-STATE PEAK OVERLOAD CURRENT vs. PULSE DURATION 1000 Ie (Apk) 0,1 100 Single pulse 0,01 D=1% D=2% D=5% D=10% D=20% D=50% 1 10 Repetitive D=50% (Tc = 100C, Tjmax = 125C) No repetitive D=1% (Tc = 100C, Tjmax = 175C) 0,001 0,00001 0,0001 0,001 0,01 0,1 t (sec) 1 0,0001 0,001 0,01 0,1 t (sec) 1 Fig. 9 Permanent current Ie (ARMS) POWER DISSIPATED AND LOAD CURRENT LIMIT VS TEMPERATURE Please refer to the installation notice for precautions about mounting the device on a heatsink. 1.2K/W 1.1K/W 0.9K/W 0.75K/W 0.55K/W 0.3K/W 0.2K/W 0.1K/W Power dissipated Pd (W) 30 1.3K/W 87 25 72.5 20 58 15 43.5 10 29 5 8K/W 4K/W 2.4K/W 2.2K/W 2.1K/W 1.95K/W 1.5K/W 14.5 0 0 10 20 30 40 50 60 70 80 90 100 0 110 Ambient temperature (C) 2.2K/W = WF262100 / WF151200 0.9K/W = WF115100 0.75K/W = WF070000 0.1K/W = No reference 10K/W = No Heatsink / 1LD12020 4K/W = 150x150x3mm aluminium sheet 2.1K/W = WF210000 1.2K/W = WF121000 1.1K/W = WF131100 0.55K/W = WF050000 0.3K/W = WF031100 0.2K/W = No reference celduc(R) r e l a i s S/CON/SCI0251700/B/25/09/08 PRELIMINARY DATA Page 4/5 UK GENERAL INFORMATION CONNECTIONS Connections Screwdriver advised Min and max tightening torque Insulated crimp terminals (round tabs, eyelet type) Display Power PhilipsTM NR2 1.8 N.m M5 Control PhilipsTM NR1 0.8 N.m M3 Green LED (indicates relay has switched ON) UL94V0 2 screws (M4x12mm) No audible noise 100g See mounting sheet MISC. Housing Mounting Noise level Weight STANDARDS GENERAL Standards Protection level Protection against direct touch CE marking UL, cULUS and VDE approvals TYPE OF TEST STANDARD EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-11 IEC60947-1 IP00 None Yes Pending LEVEL Pending Pending Pending Pending EFFECT ? ? No effect ? E.M.C. IMMUNITY E.M.C. EMISSION E.S.D. (Electrostatic discharges) Radiated electromagnetic fields Fast transients bursts Electric chocks Voltage drop Radiated and conducted disturbances NFEN55011 Pending celduc(R) r e l a i s S/CON/SCI0251700/B/25/09/08 PRELIMINARY DATA Page 5/5 UK DIMENSIONS AND ACCESSORIES Fig. 10 DIMENSIONS (mm) 28 22.8 0,5 19.6 O4.7 28 M5 1+ 58.2 43.2 247.6 47.5 3+ 25.8 TOLERANCES: 0.3 25.4 44.5 ACCESSORIES PROTECTIVE COVER 1K470000 Please consult our website for other accessory references (Heatsinks, mounting adaptors, thermal grease...) r celduc(R) e l a i s 5.1 M3 www.celduc.com 5, rue Ampere B.P. 30004 42290 SORBIERS - France Phone : 33 (0) 4 77 53 90 20 Fax : 33 (0) 4 77 53 85 51 Email : celduc-relais@celduc.com |
Price & Availability of SCI0251700
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |