View SPG8640_40676.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
Crystal oscillator SELECTABLE-OUTPUT CRYSTAL OSCILLATOR
SPG series
* Capable of selecting 57 varieties of frequency output. * Low current consumption. * Easy to mount DIP 16-pin package.
Actual size
Specifications (characteristics)
Item Symbol Specifications Remarks
Model name 8640AN Oscillation source frequency fo 600kHz Power source Max. supply voltage VDD-GND voltage VDD Operating voltage TSTG Temperature Storage temperature range TOPR Operating temperature
8640BN 8640CN 1MHz 768kHz
8650A 60kHz
8650B 100kHz
8650C 96kHz
8650E 32.768kHz
8651A 60kHz
8651B 8651E 100kHz 32.768kHz
For output frequency, refer to the table in the next page
-0.3V to +7.0V 5.0V0.5V -55C to +125C -10C to +70C Under 260C within 10 sec. 50ppm -30C to +80C -10C to +60C
Soldering condition (lead part)
Frequency tolerance
TSOL f/f0 100ppm
Package should be less than 150C
5ppm 1 5ppm 3ppm/year max. VDD=5V, Ta=25C VDD=5V VDD=4.5 to 5.5V VDD=5V, Ta=25C, first year No load condition
Three drops on a hard wooden board form 75cm
Frequency temperature characteristics Frequency voltage characteristics
20ppm
Aging fa Current consumption lop 1.0mA max. 2.0mA max. 1.5mA max. Shock resistance 5ppm max. 5ppm max. S.R. 1 Frequency tolerance of 8651 system shows the value guaranteed at the time of shipment.
+10/-120ppm 10ppm 10ppm 20ppm 5ppm/year max.
0.5mA max. 10ppm max.
Electric characteristics
Item
(VDD=5V0.5V, Ta=-10 to +70C CL 15pF)
Typ. Max. 0.8 VDD -5 0.5 -0.5 5 30 0.4 V mA A ns A IOL=1.6mA IOH= -40A VOL=0.4V VOH=VDD-1.0V Unit V Remarks
Divider IC (without quartz crystal)
Item Symbol Specifications 8650 O 1 MHz max. lop About 2 mA Remarks
L. input voltage H. input voltage L. input current (Reset) H input current (Reset) L. input current
Symbol Min. VIL 0 VIH IRL IRH IIL IIH VOL VOH IOL IOH tTLH tTHL 40 tRW tR tE FIN tIN tOSC 0.5
tW- 1 1/2 to
.comname Model
Reset=GND Reset=VDD
VDD-1.0
-30
Input clock frequency Current consumption
DataShee
No load condition
RESET timing
tRW RESET timing 50% Duty=B/A x 100 % RESET
(input terminal except for Reset)
H input current
(input terminal except for Reset)
L. output voltage H. output voltage L. output current H. output current Output rise time Output fall time Duty Min. reset pulse width Reset delay time
VDD-1.0
1.6 -40 30 25 1.0 1.0 tW
2
Output waveform 80%VDD 20%VDD
VDD 1/2VDD
60 50 60
% s Hz s s
Except in the case of 1/3 and 1/5
VOL tTHL tTLH tR tE B A tw
VOH
VSS
Reset release synchronous error
External signal input frequency
1M 0.2 1
External signal input pulse width
Oscillation start up time
8640N only 3
External dimensions
(Unit: mm)
1 to=oscillation source cycle. 2 tw=1/2 cycle of preset frequency. 3 For more than 1ms until VDD=04.5V. Time at 4.5V is to be 0.
EXC. CSEL. RESET
12 13 14
TEST
10
CLOCK ENABLE RESET
12 13 14
TEST
10
6.65
Block diagram
SPG 8650 B EPSON 0103B
20.5 max. 7.62
3.0 min. 4.5 max.
0.1 min.
O S C.
CSEL
1/1 to 1/12 Program Divider
1/1 to 1/10 7 Program Divider
9
OUT
1/1 to 1/12 Program Divider
1/1 to 1/10 7 Program Divider
9
OUT
11
4
3
2
7
6
5
4
3
2
7
6
5
FOUT
CTL1 to 3
CTL4 to 6
CTL1 to 3
CTL4 to 6
90 to 105 17.78
0.25
SPG-8650O only 8640N Pull-up and pull-down resistance 400 k (typ.)
49 .com
DataSheet 4 U .com
www..com
Crystal oscillator
Terminal connection
No. Pin terminal 1 NC 2 CTL 3 3 CTL 2 4 CTL 1 5 CTL 6 6 CTL 5 7 CTL 4 8 GND No. Pin terminal 16 VDD 15 NC 14 RESET 13 NC (CSEL) 12 NC (EXC) 11 FOUT 10 TEST 9 OUT
8650A 8651A
Set terminal CTL1 0 0 0 0 1 1 1 1 CTL4 CTL5
CTL6
16 15 14 13 12 11 10 9
1
2
3
4
5
6
78
CTL2 CTL3 0 0 0 1 1 0 1 1 0 0 0 1 1 0 1 1
0 0 0 60k 6k 30k 20k 15k 12k 10k 5k
0 0 1 6.0k 600 3.0k 2.0k 1.5k 1.2k 1.0k 500
0 1 0 600 60 300 200 150 120 100 50
0 1 1 60 6 30 20 15 12 10 5
1 0 0 6.0 0.6 3.0 2.0 1.5 1.2 1.0 0.5
1 0 1 0.6 0.06 0.3 0.2 0.15 0.12 0.1 0.05
1 1 0 0.06 0.006 0.03 0.02 0.015 0.012 0.01 0.005
1 1 1
0.006 0.0006 0.003 0.002 0.0015 0.0012 0.001 0.0005
( ) shown 8640N only
NC: Do not connect to the external terminal.
For 8650 O 11. NC 12. CLOCK 13. ENABLE
Explanation of terminal
Programs dividing ratio. (pull-down resistor incorporated.) Output frequency preset by CTL1 to 6. (refer to the procedure for setting output frequency.) Constantly outputs the oscillation source frequency of builtin (c) FOUT : crystal unit. Stops output at RESET= "L". (d) RESET : (pull-up resistor incorporated.) Used for the input terminal for testing. When CTL4 is H, (e) TEST : output will be 1000 times larger than the preset value at TEST= "H". (pull-down resistor incorporated.) Serves as input terminal when using an external clock by (f) EXC (8640N only) : changing to the builtin oscillator. Effective only when CSEL is H. (g) CSEL (8640N only) : When this terminal is made H, the external clock is selected. (pull-down resistor incorporated.)
(a) CTL 1 to 6 : (b) OUT :
8650B 8651B
Set terminal
CTL1 0 0 0 0 1 1 1 1 CTL4 CTL5 0 0 0 100k 10k 50k 33.3k 25k 20k 16.6k 0 0 1 10k 1k 5k 2.5k 2k 0 1 0 1k 100 500 250 200 83.3 0 1 1 100 10 50 33.3 25 20 16.6 8.3 1 0 0 10 1 5 3.33 2.5 2 1.6 0.83 1 0 1 1 1/10 1/2 1/3 1/4 1/5 1/6 1/12 1 1 0 1/10 1/20 1/30 1/40 1/50 1/60 1 1 1 1/100 1/200 1/300 1/400 1/500 1/600 CTL2 CTL3 CTL6 0 0 0 1 1 1 0 0 1 1 0 1 0 1 0 1
1/100 1/1000
3.3k 333.3
1.6k 166.6
8.3k 833.3
1/120 1/1200
(Note) Treatment of empty terminals. When RESET terminal is not used, this should be connected to VDD, and when TEST terminal, CSEL terminal, and CTL 1 to 6 terminals are not used, to GND.
8650E 8651E
Set terminal
CTL1 0 0 0 1 1 1 1 CTL4 CTL5 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 CTL2 CTL3 CTL6 0 0 0 32768 0 1 3276.8 1 1 0 0 1 1 0 1 0 1 0 1
Explanation of terminal (8650 O)
(a) CLOCK: Clock input (max. 1 MHz) (b) ENABLE: Be sure to connect to VDD
t4U.com
Setting of divider output
CTL1 0 0 0 0 1 1 1 1 CTL2 0 0 1 1 0 0 1 1
CTL3 0 1 0 1 0 1 0 1
Dividing ratio
1/1 1/10 1/2 1/3 1/4 1/5 1/6 1/12
CTL4 0 0 0 0 1 1 1 1
CTL5 0 0 1 1 0 0 1 1
CTL6 0 1 0 1 0 1 0 1
.com Dividing 0
ratio
1/1 1/10 1/102 1/103 1/104 1/10
5
16384 10922.6 8192 6553.6 5461.3 2730.6
3276.8 327.68 1638.4 1092.26 819.2 655.36 546.13 273.06
327.68 32.768 32.768 3.276 163.84 16.384 109.226 10.922 81.92 8.192 65.536 6.553 54.613 5.461 27.306 2.730
3.276 0.327 1.638 1.092 0.819 0.655 0.546 0.273
0.3276 0.0327 0.1638 0.1092 0.0819 0.0655 0.0546 0.0273
0.03276 0.00327 0.01638 0.01092 0.00819 0.00655 0.00546 0.00273
0.00327 0.00032 0.00163 ataShee D 0.00109 0.00081 0.00065 0.00054 0.00027
Note: Lower digits are omitted.
1/106 1/107
0= "L" 1="H"
Setting of output frequency 8640AN
Set terminal CTL4 CTL5
CTL3 CTL6
(Unit: Hz)
0 0 0 600k 60k 300k 200k 150k 120k 100k 50k 0 0 1 60k 6k 30k 20k 15k 12k 10k 5k 0 1 0 6k 600 3k 2k 1.5k 1.2k 1k 500 0 1 1 600 60 300 200 150 120 100 50 1 0 0 60 6 30 20 15 12 10 5 1 0 1 6.0 0.6 3.0 2.0 1.5 1.2 1.0 0.5 1 1 0 0.6 0.06 0.3 0.2 0.15 0.12 0.1 0.05 1 1 1 0.06 0.006 0.03 0.02 0.015 0.012 0.01 0.005
Baud rate generator 8640CN
CTL1 0 1 0 0 1 CTL2 0 0 0 1 0 CTL3 0 1 1 0 0 CTL4 0 0 0 0 0 CTL5 0 0 0 0 0 CTL6 0 0 0 1 1
CTL1 CTL2 0 0 0 0 1 0 1 0 0 1 0 1 1 1 1 1
0 1 0 1 0 1 0 1
Output frequency
768 kHz 153.6 76.8 38.4 19.2
Baud rate output example (fo/16)
48000bits/sec. 9600 4800 2400 1200
8640BN
Set terminal CTL1 0 0 0 0 1 1 1 1 CTL2 0 0 1 1 0 0 1 1 CTL4 CTL5
CTL3 CTL6
0 0 0
0 1 0 1 0 1 0 1
1M 100k 500k 333.3k 250k 200k 166.6k 83.3k
0 0 0 0 1 1 1 0 1 100k 10k 1k 10k 1k 100 50k 5k 500 33.3k 3.3k 333.3 25k 2.5k 250 20k 2k 200 16.6k 1.6k 166.6 8.3k 833.3 83.3
1 0 0 100 10 50 33.3 25 20 16.6 8.3
1 0 1 10 1 5 3.33 2.5 2 1.6 0.83
1 1 0 1 1/10 1/2 1/3 1/4 1/5 1/6 1/12
1 1 1 1/10 1/100 1/20 1/30 1/40 1/50 1/60 1/120
8650C
CTL1 0 1 0 0 0 1 1 1 CTL2 0 0 0 1 1 0 1 1 CTL3 0 1 1 0 1 0 0 1 CTL4 0 0 0 0 0 0 0 0 CTL5 0 0 0 0 0 0 0 0 CTL6 0 0 0 1 1 1 1 1
Output frequency
96.0 kHz 19.2 9.6 4.8 3.2 2.4 1.6 0.8
Baud rate output example (to/16)
6000bits/sec. 1200 600 300 200 150 100 50
.com
50
DataSheet 4 U .com
www..com
THE CRYSTALMASTER
ENERGY SAVING EPSON
EPSON offers effective savings to its customers through Our concept of Energy Saving technology conserves a wide range of electronic devices, such as semiconductors, resources by blending the essence of these three efficiency liquid crystal display (LCD) modules, and crystal devices. technologies. The essence of these technologies is repreThese savings are achieved through a sophisticated melding sented in each of the products that we provide to our cusof three different efficiency technologies. tomers. Power saving technology In the industrial sector, leading priorities include meaprovides low power consures to counter the greenhouse effect by reducing CO2, sumption at low voltages. measures to preserve the global environEnergy Saving Space saving technology ment, and the development of energyprovides further reductions efficient products. Environmental in product size and weight problems are of global concern, and Power Saving through super-precise proalthough the contribution of energyResource cessing and high-density saving technology developed by Saving assembly technology. EPSON may appear insignificant, Space Saving Time saving technology we seek to contribute to the develop.com shortens the time required ment of energy-saving products by our for design and development customers through the utilization of our electronic devices. Time Saving on the customer side and EPSON is committed to the conservation of energy, both shortens delivery times. for the sake of people and of the planet on which we live.
t4U.com
SEIKO EPSON CORP. QUARTZ DEVICE DIVISION acquired ISO9001 and ISO14001 certification by B.V.Q. I. (Bureau Veritas Quality International) . ISO9001 in October, 1992. ISO14001 in November,1997. NOTICE
No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material of portions there may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Control Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency.
.com
DataSheet 4 U .com

▲Up To Search▲

Price & Availability of SPG8640

	To Download SPG8640 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .